2003/33/EC: Council DecisionDangos y teitl llawn

2003/33/EC: Council Decision of 19 December 2002 establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC

1.2.Compliance testingU.K.

When waste has been deemed acceptable for a landfill class on the basis of a basic characterisation pursuant to section 1, it shall subsequently be subject to compliance testing to determine if it complies with the results of the basic characterisation and the relevant acceptance criteria as laid down in section 2.

The function of compliance testing is periodically to check regularly arising waste streams.

The relevant parameters to be tested are determined in the basic characterisation. Parameters should be related to basic characterisation information; only a check on critical parameters (key variables), as determined in the basic characterisation, is necessary. The check has to show that the waste meets the limit values for the critical parameters.

The tests used for compliance testing shall be one or more of those used in the basic characterisation. The testing shall consist at least of a batch leaching test. For this purpose the methods listed under section 3 shall be used.

Wastes that are exempted from the testing requirements for basic characterisation in section 1.1.4(a) and section 1.1.4(c) are also exempted from compliance testing. They will, however, need checking for compliance with basic characterisation information other than testing.

Compliance testing shall be carried out at least once a year and the operator must, in any event, ensure that compliance testing is carried out in the scope and frequency determined by basic characterisation.

Records of the test results shall be kept for a period that will be determined by the Member State.