xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
Textual Amendments
The minimum acceptable contents shall be calculated by subtracting the tolerable negative error for the contents concerned from the nominal quantity of the prepackage.
Prepackages in the batch whose actual contents are less than the minimum acceptable contents shall be considered defective.
Non-destructive testing shall be carried out in accordance with a double sampling plan as shown in the table below:
The first number of prepackages checked shall be equal to the number of units in the first sample, as indicated in the plan:
if the number of defective units found in the first sample is less than or equal to the first acceptance criterion, the batch shall be considered acceptable for the purpose of this check,
if the number of defective units found in the first sample is equal to or greater than the first rejection criterion, thebatch shall be rejected,
if the number of defective units found in the first sample lies between the first acceptance criterion and the first rejection criterion, a second sample shall be checked, the number of units in which is indicated in the plan.
The defective units found in the first and second samples shall be added together and:
if the aggregate number of defective units is less than or equal to the second acceptance criterion, the batch shall be considered acceptable for the purpose of this check,
if the aggregate number of defective units is greater than or equal to the second rejection criterion, the batch shall be rejected.
Number in batch | Samples | Number of defective units | |||
---|---|---|---|---|---|
Order | Number | Aggregate number | Acceptance criterion | Rejection criterion | |
100 to 500 | 1st | 30 | 30 | 1 | 3 |
2nd | 30 | 60 | 4 | 5 | |
501 to 3 200 | 1st | 50 | 50 | 2 | 5 |
2nd | 50 | 100 | 6 | 7 | |
3 201 and over | 1st | 80 | 80 | 3 | 7 |
2nd | 80 | 160 | 8 | 9 |
Destructive testing shall be carried out in accordance with the single sampling plan below and shall be used only for batches of 100 or more.
The number of prepackages checked shall be equal to 20.
If the number of defective units found in the sample is less than or equal to the acceptance criterion, the batch of prepackages shall be considered as acceptable.
If the number of defective units found in the sample is equal to or greater than the rejection criterion, the batch of prepackages shall be rejected.
Number in batch | Number in sample | Number of defective units | |
---|---|---|---|
Acceptance criterion | Rejection criterion | ||
Whatever the number (≥ 100) | 20 | 1 | 2] |