Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery (repealed)
Print Options
PrintThe Whole
Directive
PrintThis
Attachment
only
Changes over time for:
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Version Superseded: 10/01/2013
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
ANNEX II
INFORMATION DOCUMENT No. …
relating to type-approval and referring to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery
(Directive 97/68/EC as last amended by Directive ../…/EC)
Appendix 1
[2. MEASURES TAKEN AGAINST AIR POLLUTION U.K.
2.1. Device for recycling crankcase gases: yes/no () … U.K.
2.2. Additional anti-pollution devices (if any, and if not covered by another heading) U.K.
2.2.1. Catalytic converter: yes/no () U.K.
2.2.1.1. Make(s): … U.K.
2.2.1.2. Type(s): … U.K.
2.2.1.3. Number of catalytic converters and elements … U.K.
2.2.1.4. Dimensions- and volume of the catalytic converter(s): … U.K.
2.2.1.5. Type of catalytic action: … U.K.
2.2.1.6. Total charge of precious metals: … U.K.
2.2.1.7. Relative concentration: … U.K.
2.2.1.8. Substrate (structure and material): … U.K.
2.2.1.9. Cell density: … U.K.
2.2.1.10. Type of casing for the catalytic converter(s): … U.K.
2.2.1.11. Location of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): … U.K.
2.2.1.12. Normal operating range (K): … U.K.
2.2.1.13. Consumable reagent (where appropriate): … U.K.
2.2.1.13.1. Type and concentration of reagent needed for catalytic action: … U.K.
2.2.1.13.2. Normal operational temperature range of reagent: … U.K.
2.2.1.13.3. International standard (where appropriate): … U.K.
2.2.1.14. NO x sensor: yes/no () U.K.
2.2.2. Oxygen sensor: yes/no () U.K.
2.2.2.1. Make(s): … U.K.
2.2.2.2. Type: … U.K.
2.2.2.3. Location: … U.K.
2.2.3. Air injection: yes/no () U.K.
2.2.3.1. Type (pulse air, air pump, etc.): … U.K.
2.2.4. EGR: yes/no () U.K.
2.2.4.1. Characteristics (cooled/uncooled, high pressure/low pressure, etc.): … U.K.
2.2.5. Particulate trap: yes/no () U.K.
2.2.5.1. Dimensions and capacity of the particulate trap: … U.K.
2.2.5.2. Type and design of the particulate trap: … U.K.
2.2.5.3. Location (place(s) and maximum/minimum distance(s) from engine): … U.K.
2.2.5.4. Method or system of regeneration, description and/or drawing: … U.K.
2.2.5.5. Normal operating temperature (K) and pressure (kPa) range: … U.K.
2.2.6. Other systems: yes/no () U.K.
2.2.6.1. Description and operation: …] U.K.
Appendix 3
[2. MEASURES TAKEN AGAINST AIR POLLUTION U.K.
2.1. Device for recycling crankcase gases: yes/no () … U.K.
2.2. Additional anti-pollution devices (if any, and if not covered by another heading) U.K.
2.2.1. Catalytic converter: yes/no () U.K.
2.2.1.1. Make(s): … U.K.
2.2.1.2. Type(s): … U.K.
2.2.1.3. Number of catalytic converters and elements … U.K.
2.2.1.4. Dimensions- and volume of the catalytic converter(s): … U.K.
2.2.1.5. Type of catalytic action: … U.K.
2.2.1.6. Total charge of precious metals: … U.K.
2.2.1.7. Relative concentration: … U.K.
2.2.1.8. Substrate (structure and material): … U.K.
2.2.1.9. Cell density: … U.K.
2.2.1.10. Type of casing for the catalytic converter(s): … U.K.
2.2.1.11. Location of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): … U.K.
2.2.1.12. Normal operating range (K) … U.K.
2.2.1.13. Consumable reagent (where appropriate): … U.K.
2.2.1.13.1. Type and concentration of reagent needed for catalytic action: … U.K.
2.2.1.13.2. Normal operational temperature range of reagent: … U.K.
2.2.1.13.3. International standard (where appropriate): … U.K.
2.2.1.14. NO x sensor: yes/no () U.K.
2.2.2. Oxygen sensor: yes/no () U.K.
2.2.2.1. Make(s): … U.K.
2.2.2.2. Type: … U.K.
2.2.2.3. Location: … U.K.
2.2.3. Air injection: yes/no () U.K.
2.2.3.1. Type (pulse air, air pump, etc.): … U.K.
2.2.4. EGR: yes/no () U.K.
2.2.4.1. Characteristics (cooled/uncooled, high pressure/low pressure, etc.): … U.K.
2.2.5. Particulate trap: yes/no () U.K.
2.2.5.1. Dimensions and capacity of the particulate trap: … U.K.
2.2.5.2. Type and design of the particulate trap: … U.K.
2.2.5.3. Location (place(s) and maximum/minimum distance(s) from engine): … U.K.
2.2.5.4. Method or system of regeneration, description and/or drawing: … U.K.
2.2.5.5. Normal operating temperature (K) and pressure (kPa) range: … U.K.
2.2.6. Other systems: yes/no () U.K.
2.2.6.1. Description and operation: …] U.K.
Back to top