Directive 2004/107/EC of the European Parliament and of the Council of 15 December 2004 relating to arsenic, cadmium, mercury, nickel and polycyclic aromatic hydrocarbons in ambient air
Print Options
PrintThe Whole
Directive
PrintThe Whole
Annex
PrintThis
Division
only
Changes over time for: Division IV.
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
IV.Criteria for determining numbers of sampling points for fixed measurement of concentrations of arsenic, cadmium, nickel and benzo(a)pyrene in ambient airU.K.
Minimum number of sampling points for fixed measurement to assess compliance with target values for the protection of human health in zones and agglomerations where fixed measurement is the sole source of information.U.K.
(a)Diffuse sourcesU.K.
|
Population of agglomeration or zone(thousands) | If maximum concentrations exceed the upper assessment threshold | If maximum concentrations are between the upper and lower assessment thresholds |
---|
As, Cd, Ni | B(a)P | As, Cd, Ni | B(a)P |
---|
0–749 | 1 | 1 | 1 | 1 |
750–1 999 | 2 | 2 | 1 | 1 |
2 000–3 749 | 2 | 3 | 1 | 1 |
3 750–4 749 | 3 | 4 | 2 | 2 |
4 750–5 999 | 4 | 5 | 2 | 2 |
≥ 6 000 | 5 | 5 | 2 | 2 |
(b)Point sourcesU.K.
For the assessment of pollution in the vicinity of point sources, the number of sampling points for fixed measurement should be determined taking into account emission densities, the likely distribution patterns of ambient air pollution and potential exposure of the population.
The sampling points should be sited such that the application of BAT as defined by Article 2(11) of Directive 96/61/EC can be monitored.
Back to top