Council Regulation (EU) No 961/2010 of 25 October 2010 on restrictive measures against Iran and repealing Regulation (EC) No 423/2007 (repealed)
Print Options
PrintThe Whole
Regulation
PrintThe Whole
Annex
PrintThis
Division
only
IV.A. GOODS
A0.
Nuclear Materials, Facilities, and Equipment
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|
IV.A0.010 | Pipes, piping, flanges, fittings made of, or lined with, nickel or nickel alloy containing more than 40 % nickel by weight, other than those specified in 2B350.h.1., in respect of pipes having an inner diameter larger than 100 mm. | 2B350 |
IV.A0.011 | Vacuum pumps other than those specified in 0B002.f.2 or 2B231, as follows:
Turbomolecular pumps having a flowrate equal to or greater than 400 l/s,
Roots type vacuum roughing pumps having a volumetric aspiration flowrate greater than 200 m3/h.
Bellows-sealed, scroll, dry compressor, and bellows-sealed, scroll, dry vacuum pumps.
| 0B002.f.2, 2B231 |
A1.
Materials, chemicals, ‘micro-organisms’ and ‘toxins’
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|
IV.A1.003 | Ring-shaped seals and gaskets, having an inner diameter of 400 mm or less, made of any of the following materials:
a. Copolymers of vinylidene fluoride having 75 % or more beta crystalline structure without stretching;
b. Fluorinated polyimides containing 10 % by weight or more of combined fluorine;
c. Fluorinated phosphazene elastomers containing 30 % by weight or more of combined fluorine;
d. Polychlorotrifluoroethylene (PCTFE, e.g. Kel-F ®);
e. Fluoro-elastomers (e.g., Viton ®, Tecnoflon ®);
f. Polytetrafluoroethylene (PTFE).
| |
IV.A1.004 | Personal equipment for detecting radiation of nuclear origin, including personal dosimeters.
Note: This item does not cover nuclear detection systems defined in item 1A004.c.
| 1A004.c |
A2.
Materials Processing
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|
IV.A2.005 | Controlled atmosphere heat treatment furnaces, as follows: | 2B226 |
Furnaces capable of operation at temperatures above 400 °C. | 2B227 |
IV.A2.008 | Liquid-liquid contacting equipment (mixer-settlers, pulsed columns, centrifugal contactors); and liquid distributors, vapour distributors or liquid collectors designed for such equipment, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:
1. Alloys with more than 25 % nickel and 20 % chromium by weight;
3. Glass (including vitrified or enamelled coating or glass lining);
4. Graphite or ‘carbon graphite’;
5. Nickel or alloys with more than 40 % nickel by weight;
6. Tantalum or tantalum alloys;
7. Titanium or titanium alloys;
8. Zirconium or zirconium alloys; or
Technical Note: ‘Carbon graphite’ is a composition consisting of amorphous carbon and graphite, in which the graphite content is 8 % or more by weight.
| 2B350.e |
IV.A2.009 | Industrial equipment and components, other than those specified in 2B350.d, as follows:
Heat exchangers or condensers with a heat transfer surface area greater than 0,05 m2, and less than 30 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the fluid(s) are made from any of the following materials:
1. Alloys with more than 25 % nickel and 20 % chromium by weight;
3. Glass (including vitrified or enamelled coating or glass lining);
4. Graphite or ‘carbon graphite’;
5. Nickel or alloys with more than 40 % nickel by weight;
6. Tantalum or tantalum alloys;
7. Titanium or titanium alloys;
8. Zirconium or zirconium alloys;
Note: This item does not cover vehicle radiators.
Technical Note: The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the heat exchanger.
| 2B350.d |
IV.A2.010 | Multiple-seal, and seal-less pumps, other than those specified in 2B350.i, suitable for corrosive fluids, with manufacturer's specified maximum flow-rate greater than 0,6 m3/hour, or vacuum pumps with manufacturer's specified maximum flow-rate greater than 5 m3/hour [measured under standard temperature (273 K or 0 °C) and pressure (101,3 k Pa) conditions]; and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:
1. Alloys with more than 25 % nickel and 20 % chromium by weight;
5. Glass (including vitrified or enamelled coatings or glass lining);
6. Graphite or ‘carbon graphite’;
7. Nickel or alloys with more than 40 % nickel by weight;
8. Tantalum or tantalum alloys;
9. Titanium or titanium alloys;
10. Zirconium or zirconium alloys;
11. Niobium (columbium) or niobium alloys;
Technical Note: The materials used for gaskets and seals and other implementation of sealing functions do not determine the status of control of the pump.
| 2B350.d |
A3.
Electronics
No | Description | Related item from Annex I to Regulation (EC) No 428/2009 |
---|
IV.A3.004 | Spectrometers and diffractometers, designed for the indicative test or quantitative analysis of the elemental composition of metals or alloys without chemical decomposition of the material. | |
Back to top