Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)
Print Options
PrintThe Whole
Regulation
PrintThe Whole
Chapter
PrintThis
Article
only
Changes over time for: Article 58
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Status:
Point in time view as at 31/01/2020.
Changes to legislation:
Regulation (EU) No 168/2013 of the European Parliament and of the Council, Article 58 is up to date with all changes known to be in force on or before 09 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes to Legislation
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Article 58U.K.Obligations with regard to several type-approval holders
1.In the event of step-by-step type-approval or of multi-stage type-approval, the manufacturer responsible for the respective type-approval shall also be responsible for communicating repair information relating to the particular system, component or separate technical unit or to the particular stage to both the final manufacturer and independent operators.
2.The final manufacturer shall be responsible for providing information about the whole vehicle to independent operators.
Back to top