Regulation (EU) No 168/2013 of the European Parliament and of the Council of 15 January 2013 on the approval and market surveillance of two- or three-wheel vehicles and quadricycles (Text with EEA relevance)
Print Options
PrintThe Whole
Regulation
PrintThe Whole
Chapter
PrintThis
Article
only
Changes over time for: Article 72
Timeline of Changes
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Status:
Point in time view as at 31/01/2020.
Changes to legislation:
Regulation (EU) No 168/2013 of the European Parliament and of the Council, Article 72 is up to date with all changes known to be in force on or before 06 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes to Legislation
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
Article 72U.K.Implementing acts
For the purposes of achieving the objectives of this Regulation and in order to lay down uniform conditions for the implementation of this Regulation, the Commission shall, in accordance with the examination procedure referred to in Article 73(2), adopt implementing acts laying down the following implementing measures:
(a)
the template for the manufacturer’s statement regarding the endurance of functional safety critical systems, parts and equipment referred to in Article 22(7);
(b)
templates for the information document and for the information folder referred to in Article 27(4);
(c)
the numbering system of EU type-approval certificates referred to in Article 29(4);
(d)
the template for the EU type-approval certificate referred to in Article 30(2);
(e)
the template for the test results sheet appended to the EU type-approval certificate referred to in Article 30(3);
(f)
the template for the list of applicable requirements or acts referred to in Article 30(6);
(g)
the general requirements for the format of test report referred to in Article 32(1);
(h)
the template for the certificate of conformity referred to in Article 38(2);
(i)
the model for the EU type-approval mark referred to in Article 39(3);
(j)
the authorisations to grant EU type-approvals exempting new technologies or new concepts referred to in Article 40(3);
(k)
the templates for the type-approval certificate and the certificate of conformity as regards new technologies or new concepts referred to in Article 40(4);
(l)
the authorisations to Member States to extend the type-approval referred to in Article 41(2);
(m)
the list of parts and equipment as referred to in Article 50(2);
(n)
the template and the numbering system for the certificate referred to in Article 51(3) as well as all aspects relating to the procedure of authorisation referred to in that Article;
(o)
the template for the certificate providing proof of compliance to the approval authority as referred to in Article 57(8).
Back to top