Search Legislation

Advanced Search

Council Directive of 21 December 1988 on the approximation of the laws of the Member States relating to certain components and characteristics of wheeled agricultural or forestry tractors (89/173/EEC) (repealed)

Help about what version

What Version

Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

This item of legislation originated from the EU

Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).

Status:

EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.

  1. Introductory Text

  2. Article 1.. . . . . . . . . ....

  3. Article 2.. . . . . . . . . ....

  4. Article 3.. . . . . . . . . ....

  5. Article 4.. . . . . . . . . ....

  6. Article 5.. . . . . . . . . ....

  7. Article 6.. . . . . . . . . ....

  8. Article 7.. . . . . . . . . ....

  9. Article 8.. . . . . . . . . ....

  10. Article 9.. . . . . . . . . ....

  11. Article 10.. . . . . . . . . ....

  12. Article 11.. . . . . . . . . ....

    1. ANNEX I

      DIMENSIONS AND TOWABLE MASSES

      1. 1. DEFINITIONS

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. ‘Permissible towable mass’

        5. 1.5. ‘Towing device’

        6. 1.6. ‘Unladen mass of tractor in running order (Mt)’

        7. 1.7. Technically permissable towable mass(es):

      2. 2. REQUIREMENTS

        1. 2.1. Dimensions

          1. 2.1.1. . . . . . . . . . ....

          2. 2.1.2. . . . . . . . . . ....

          3. 2.1.3. . . . . . . . . . ....

          4. 2.1.4. . . . . . . . . . ....

        2. 2.2 Permissible towable mass

          1. 2.2.1. . . . . . . . . . ....

            1. 2.2.1.1. . . . . . . . . . ....

            2. 2.2.1.2. . . . . . . . . . ....

          2. 2.2.2. . . . . . . . . . ....

      3. Appendix

        MODEL

    2. ANNEX II

      SPEED GOVERNOR AND PROTECTION OF DRIVE COMPONENTS, PROJECTIONS AND WHEELS

      1. 1. SPEED GOVERNOR

        1. 1.1. . . . . . . . . . ....

      2. 2. PROTECTION OF DRIVE COMPONENTS, PROJECTIONS AND WHEELS

        1. 2.1. General

          1. 2.1.1. . . . . . . . . . ....

          2. 2.1.2. . . . . . . . . . ....

          3. 2.1.3. . . . . . . . . . ....

          4. 2.1.4. . . . . . . . . . ....

          5. 2.1.5. . . . . . . . . . ....

          6. 2.1.6. . . . . . . . . . ....

        2. 2.2. Definitions

          1. 2.2.1. . . . . . . . . . ....

            1. 2.2.1.1. . . . . . . . . . ....

            2. 2.2.1.2. . . . . . . . . . ....

            3. 2.2.1.3. . . . . . . . . . ....

          2. 2.2.2. . . . . . . . . . ....

            1. 2.2.2.1. . . . . . . . . . ....

            2. 2.2.2.2. . . . . . . . . . ....

            3. 2.2.2.3. . . . . . . . . . ....

            4. 2.2.2.4. . . . . . . . . . ....

            5. 2.2.2.5. . . . . . . . . . ....

          3. 2.2.3. . . . . . . . . . ....

          4. 2.2.4. . . . . . . . . . ....

          5. 2.2.5. . . . . . . . . . ....

          6. 2.2.6. . . . . . . . . . ....

          7. 2.2.7. . . . . . . . . . ....

        3. 2.3. Safety distances for avoiding contact with dangerous parts

          1. 2.3.1. . . . . . . . . . ....

          2. 2.3.2. Protection of dangerous points

            1. Upwards

            2. 2.3.2.2. Downwards, above

              1. TABLE 1

            3. 2.3.2.3. Reach around

              1. TABLE 2

            4. 2.3.2.4. Penetration and reach across

              1. TABLE 3 Safety distances for elongated and parallel openings

              2. TABLE 4 Safety distances for square or circular apertures

            5. 2.3.2.5. Safety distances at pinching points

              1. TABLE 5

            6. 2.3.2.6. Controls

            7. 2.3.2.7. Rear three-point coupling

              1. 2.3.2.7.1. . . . . . . . . . ....

              2. 2.3.2.7.2. . . . . . . . . . ....

              3. 2.3.2.7.3. . . . . . . . . . ....

              4. 2.3.2.7.4. . . . . . . . . . ....

              5. 2.3.2.7.5. . . . . . . . . . ....

            8. 2.3.2.8. Front three-point coupling

              1. 2.3.2.8.1. . . . . . . . . . ....

              2. 2.3.2.8.2. . . . . . . . . . ....

              3. 2.3.2.8.3. . . . . . . . . . ....

            9. 2.3.2.9. Driving seat and environment

              1. 2.3.2.9.1. . . . . . . . . . ....

              2. 2.3.2.9.2. . . . . . . . . . ....

              3. 2.3.2.9.3. . . . . . . . . . ....

              4. 2.3.2.9.4. . . . . . . . . . ....

            10. 2.3.2.10. Passenger seat (if any)

              1. 2.3.2.10.1. . . . . . . . . . ....

              2. 2.3.2.10.2. . . . . . . . . . ....

            11. 2.3.2.11. Narrow-track tractors (tractors with a track as defined in the...

              1. 2.3.2.11.1. . . . . . . . . . ....

              2. 2.3.2.11.2. . . . . . . . . . ....

              3. 2.3.2.11.3. . . . . . . . . . ....

              4. 2.3.2.11.4. . . . . . . . . . ....

            12. 2.3.2.12. Layout and marking of flexible hydraulic hoses

              1. 2.3.2.12.1. . . . . . . . . . ....

              2. 2.3.2.12.2. . . . . . . . . . ....

              3. 2.3.2.12.3. . . . . . . . . . ....

            13. 2.3.2.13. Steering and swing axle

            14. 2.3.2.14. Transmission shafts fixed on the tractor

            15. 2.3.2.15. Clearance zone around the drive wheels

              1. 2.3.2.15.1. . . . . . . . . . ....

              2. 2.3.2.15.2. . . . . . . . . . ....

                1. TABLE 6

            16. 2.3.2.16. Hot surfaces

            17. 2.3.2.17. Battery terminal cover

        4. 2.4. Method of determining the seat index point

          1. 2.4.1. General

          2. 2.4.2. Definitions

          3. 2.4.3. Device for determining the seat index point (SIP)

          4. 2.4.4. Seat setting for determination of index point (SIP)

          5. 2.4.5. Determination of the three reference axes x′, y′, and z′...

          6. 2.4.6. Method of determining the seat index point (SIP)

      3. Appendix

        MODEL

    3. ANNEX III A

      WINDSCREEN AND OTHER GLAZING

      1. 1. EQUIPMENT REQUIREMENTS

        1. 1.1. . . . . . . . . . ....

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

      2. 2. DEFINITIONS

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

          1. 2.2.1. . . . . . . . . . ....

          2. 2.2.2. . . . . . . . . . ....

        3. 2.3. . . . . . . . . . ....

        4. 2.4. . . . . . . . . . ....

        5. 2.5. . . . . . . . . . ....

          1. 2.5.1. . . . . . . . . . ....

          2. 2.5.2. . . . . . . . . . ....

        6. 2.6. . . . . . . . . . ....

        7. 2.7. . . . . . . . . . ....

          1. 2.7.1. . . . . . . . . . ....

          2. 2.7.2. . . . . . . . . . ....

        8. 2.8. . . . . . . . . . ....

        9. 2.9. . . . . . . . . . ....

        10. 2.10. . . . . . . . . . ....

        11. 2.11. . . . . . . . . . ....

        12. 2.12. . . . . . . . . . ....

          1. 2.12.1. . . . . . . . . . ....

          2. 2.12.2. . . . . . . . . . ....

        13. 2.13. . . . . . . . . . ....

        14. 2.14. . . . . . . . . . ....

          1. 2.14.1. . . . . . . . . . ....

          2. 2.14.2. . . . . . . . . . ....

        15. 2.15. . . . . . . . . . ....

      3. 3. APPLICATION FOR COMPONENT TYPE-APPROVAL

        1. 3.1. . . . . . . . . . ....

        2. 3.2. . . . . . . . . . ....

          1. 3.2.1. . . . . . . . . . ....

            1. 3.2.1.1. . . . . . . . . . ....

            2. 3.2.1.2. . . . . . . . . . ....

              1. 3.2.1.2.1. . . . . . . . . . ....

              2. 3.2.1.2.2. . . . . . . . . . ....

                1. 3.2.1.2.2.1. . . . . . . . . . ....

                2. 3.2.1.2.2.2. . . . . . . . . . ....

                3. 3.2.1.2.2.2. . . . . . . . . . ....

                4. 3.2.1.2.2.3. . . . . . . . . . ....

                5. 3.2.1.2.2.4. . . . . . . . . . ....

                6. 3.2.1.2.2.5. . . . . . . . . . ....

                7. 3.2.1.2.2.6. . . . . . . . . . ....

            3. 3.2.1.3. . . . . . . . . . ....

        3. 3.3 . . . . . . . . . ....

        4. 3.4. . . . . . . . . . ....

      4. 4. MARKINGS

        1. 4.1. . . . . . . . . . ....

      5. 5. COMPONENT TYPE-APPROVAL

        1. 5.1. . . . . . . . . . ....

        2. 5.2. . . . . . . . . . ....

        3. 5.3. . . . . . . . . . ....

          1. 5.3.1. . . . . . . . . . ....

        4. 5.4. . . . . . . . . . ....

          1. 5.4.1. . . . . . . . . . ....

          2. 5.4.2. . . . . . . . . . ....

        5. 5.5. . . . . . . . . . ....

          1. 5.5.1. . . . . . . . . . ....

          2. 5.5.2. . . . . . . . . . ....

          3. 5.5.3. . . . . . . . . . ....

          4. 5.5.4. . . . . . . . . . ....

        6. 5.6. . . . . . . . . . ....

        7. 5.7. . . . . . . . . . ....

      6. 6. GENERAL REQUIREMENTS

        1. 6.1. . . . . . . . . . ....

        2. 6.2. . . . . . . . . . ....

      7. 7. PARTICULAR REQUIREMENTS

        1. 7.1. . . . . . . . . . ....

        2. 7.2. . . . . . . . . . ....

        3. 7.3. . . . . . . . . . ....

        4. 7.4. . . . . . . . . . ....

        5. 7.5. . . . . . . . . . ....

        6. 7.6. . . . . . . . . . ....

        7. 7.7. . . . . . . . . . ....

        8. 7.8. . . . . . . . . . ....

        9. 7.9. . . . . . . . . . ....

      8. 8. TESTS

        1. 8.1. . . . . . . . . . ....

          1. 8.1.1. Fragmentation

            1. 8.1.1.1. . . . . . . . . . ....

            2. 8.1.1.2. . . . . . . . . . ....

          2. 8.1.2. Mechanical strength

            1. 8.1.2.1. Ball-impact test

              1. 8.1.2.1.1. . . . . . . . . . ....

              2. 8.1.2.1.2. . . . . . . . . . ....

            2. 8.1.2.2. Headform test

          3. 8.1.3. Resistance to the environment

            1. 8.1.3.1. Abrasion test

            2. 8.1.3.2. High-temperature test

            3. 8.1.3.3. Resistance-to-radiation test

            4. 8.1.3.4. Resistance-to-humidity test

            5. 8.1.3.5. Resistance to temperature change

          4. 8.1.4. Optical qualities

            1. 8.1.4.1. Light-transmission test

            2. 8.1.4.2. Optical-distortion test

            3. 8.1.4.3. Secondary-image-separation test

            4. 8.1.4.4. Identification-of-colours test

          5. 8.1.5. Fire-resistance test

          6. 8.1.6. Resistance to chemical agents

        2. 8.2. Tests prescribed for glass panes of the categories defined in...

          1. 8.2.1. . . . . . . . . . ....

          2. 8.2.2. . . . . . . . . . ....

      9. 9. MODIFICATION OR EXTENSION OF APPROVAL FOR A TYPE OF SAFETY-GLASS...

        1. 9.1. . . . . . . . . . ....

          1. 9.1.1. . . . . . . . . . ....

          2. 9.1.2. . . . . . . . . . ....

        2. 9.2. Communication

          1. 9.2.1. . . . . . . . . . ....

          2. 9.2.2. . . . . . . . . . ....

      10. 10. CONFORMITY OF PRODUCTION

        1. 10.1. . . . . . . . . . ....

        2. 10.2. . . . . . . . . . ....

        3. 10.3. . . . . . . . . . ....

          1. 10.3.1. . . . . . . . . . ....

          2. 10.3.2. . . . . . . . . . ....

          3. 10.3.3. . . . . . . . . . ....

          4. 10.3.4. . . . . . . . . . ....

          5. 10.3.5. . . . . . . . . . ....

          6. 10.3.6. . . . . . . . . . ....

        4. 10.4. . . . . . . . . . ....

          1. 10.4.1. . . . . . . . . . ....

          2. 10.4.2. . . . . . . . . . ....

          3. 10.4.3. . . . . . . . . . ....

          4. 10.4.4. . . . . . . . . . ....

          5. 10.4.5. . . . . . . . . . ....

      11. 11. PENALTIES FOR NON-CONFORMITY OF PRODUCTION

        1. 11.1. . . . . . . . . . ....

        2. 11.2. . . . . . . . . . ....

      12. 12. PRODUCTION DEFINITELY DICSONTINUED

      13. 13. NAMES AND ADDRESSES OF THE TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING...

      14. Appendix

        EXAMPLES OF COMPONENT TYPE-APPROVAL MARKS

        1. . . . . . . . . . ....

        2. . . . . . . . . . ....

        3. . . . . . . . . . ....

        4. . . . . . . . . . ....

        5. . . . . . . . . . ....

        6. . . . . . . . . . ....

        7. . . . . . . . . . ....

        8. . . . . . . . . . ....

        9. . . . . . . . . . ....

        10. . . . . . . . . . ....

        11. . . . . . . . . . ....

        12. . . . . . . . . . ....

        13. . . . . . . . . . ....

        14. . . . . . . . . . ....

        15. . . . . . . . . . ....

        16. . . . . . . . . . ....

        17. . . . . . . . . . ....

        18. . . . . . . . . . ....

        19. . . . . . . . . . ....

        20. . . . . . . . . . ....

    4. ANNEX III B

      1. . . . . . . . . . ....

      2. Appendix 1

        TOUGHENED-GLASS WINDSCREENS

      3. Appendix 2

        UNIFORMLY TOUGHENED-GLASS PANES OTHER THAN WINDSCREENS

      4. Appendix 3

        LAMINATED-GLASS WINDSCREENS

      5. Appendix 4

        LAMINATED-GLASS PANES OTHER THAN WINDSCREENS

      6. Appendix 5

        GLASS-PLASTIC WINDSCREENS

      7. Appendix 6

        GLASS-PLASTIC PANES OTHER THAN WINDSCREENS

      8. Appendix 7

        DOUBLE-GLAZED UNITS

      9. Appendix 8

        CONTENTS OF THE LIST OF WINDSCREENS

    5. ANNEX III C

      GENERAL TEST CONDITIONS

      1. 1. FRAGMENTATION TESTS

        1. 1.1 . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. . . . . . . . . . ....

      2. 2. BALL-IMPACT TESTS

        1. 2.1. 227-g-ball test

          1. 2.1.1. Apparatus

            1. 2.1.1.1. . . . . . . . . . ....

            2. 2.1.1.2. . . . . . . . . . ....

            3. 2.1.1.3. . . . . . . . . . ....

          2. 2.1.2. Test conditions

          3. 2.1.3. Test piece

          4. 2.1.4. Procedure

        2. 2.2. 2 260-g-ball test

          1. 2.2.1. Apparatus

            1. 2.2.1.1. . . . . . . . . . ....

            2. 2.2.1.2. . . . . . . . . . ....

            3. 2.2.1.3. . . . . . . . . . ....

          2. 2.2.2. Test conditions

          3. 2.2.3. Test piece

          4. 2.2.4. Procedure

      3. 3. HEADFORM TEST

        1. 3.1. Apparatus

          1. 3.1.1. . . . . . . . . . ....

          2. 3.1.2. . . . . . . . . . ....

          3. 3.1.3. . . . . . . . . . ....

        2. 3.2. Test conditions

          1. 3.2.1. — . . . . . . . . ....

            1. — . . . . . . . . . ....

          2. 3.2.2. — . . . . . . . . ....

            1. — . . . . . . . . . ....

          3. 3.2.3. — . . . . . . . . ....

            1. — . . . . . . . . . ....

        3. 3.3. Procedure

          1. 3.3.1. Test on a flat test piece

          2. 3.3.2. Tests on a complete windscreen (used only for a drop...

      4. 4. ABRASION TEST

        1. 4.1. Apparatus

          1. 4.1.1. . . . . . . . . . ....

          2. 4.1.2. . . . . . . . . . ....

          3. 4.1.3. . . . . . . . . . ....

          4. 4.1.4. . . . . . . . . . ....

          5. 4.1.5. . . . . . . . . . ....

        2. 4.2. Test conditions

          1. 4.2.1. . . . . . . . . . ....

          2. 4.2.2. . . . . . . . . . ....

          3. 4.2.3. . . . . . . . . . ....

        3. 4.3. Test pieces

        4. 4.4. Procedure

          1. 4.4.1. . . . . . . . . . ....

          2. 4.4.2. . . . . . . . . . ....

          3. 4.4.3. . . . . . . . . . ....

        5. 4.5 . . . . . . . . . ....

        6. 4.6. Indices of difficulty of the secondary characteristics.

      5. 5. HIGH-TEMPERATURE TEST

        1. 5.1. Procedure

        2. 5.2. Indices of difficulty of the secondary characteristics

        3. 5.3. Interpretation of results

          1. 5.3.1. . . . . . . . . . ....

          2. 5.3.2. . . . . . . . . . ....

            1. 5.3.2.1. . . . . . . . . . ....

            2. 5.3.2.2. . . . . . . . . . ....

      6. 6. RESISTANCE-TO-RADIATION TEST

        1. 6.1. Test method

          1. 6.1.1. Apparatus

            1. 6.1.1.1. . . . . . . . . . ....

            2. 6.1.1.2. . . . . . . . . . ....

            3. 6.1.1.3. . . . . . . . . . ....

          2. 6.1.2. Test pieces

            1. 6.1.2.1. . . . . . . . . . ....

            2. 6.1.2.2. . . . . . . . . . ....

          3. 6.1.3. Procedure

          4. 6.1.4. . . . . . . . . . ....

        2. 6.2. Indices of difficulty of the secondary characteristics

        3. 6.3. Interpretation of results

          1. 6.3.1. . . . . . . . . . ....

            1. 6.3.1.1. . . . . . . . . . ....

              1. 6.3.1.1.1. . . . . . . . . . ....

              2. 6.3.1.1.2. . . . . . . . . . ....

            2. 6.3.1.2. . . . . . . . . . ....

          2. 6.3.2. . . . . . . . . . ....

            1. 6.3.2.1. . . . . . . . . . ....

            2. 6.3.2.2. . . . . . . . . . ....

      7. 7. RESISTANCE-TO-HUMIDITY TEST

        1. 7.1. Procedure

        2. 7.2. Indices of difficulty of the secondary characteristics

        3. 7.3. Interpretation of results

          1. 7.3.1. . . . . . . . . . ....

          2. 7.3.2. . . . . . . . . . ....

            1. 7.3.2.1. . . . . . . . . . ....

            2. 7.3.2.2. . . . . . . . . . ....

      8. 8. TESTING OF RESISTANCE TO CHANGES IN TEMPERATURE

        1. 8.1. Test method

        2. 8.2. Index of difficulty of the secondary characteristics

        3. 8.3. Interpretation of results

      9. 9. OPTICAL QUALITIES

        1. 9.1. Light transmission test

          1. 9.1.1. Apparatus

            1. 9.1.1.1. . . . . . . . . . ....

            2. 9.1.1.2. . . . . . . . . . ....

            3. 9.1.1.3. . . . . . . . . . ....

          2. 9.1.2. Procedure

            1. 9.1.2.1. . . . . . . . . . ....

            2. 9.1.2.2. . . . . . . . . . ....

            3. 9.1.2.3. . . . . . . . . . ....

          3. 9.1.3. Indices of difficulty of the secondary characteristics

          4. 9.1.4. Interpretation of results

            1. 9.1.4.1. . . . . . . . . . ....

            2. 9.1.4.2. . . . . . . . . . ....

        2. 9.2. Optical-distortion test

          1. 9.2.1. Scope

            1. 9.2.1.1. Definitions

              1. 9.2.1.1.1. . . . . . . . . . ....

              2. 9.2.1.1.2. . . . . . . . . . ....

              3. 9.2.1.1.3. . . . . . . . . . ....

            2. 9.2.1.2. Apparatus

              1. 9.2.1.2.1. . . . . . . . . . ....

              2. 9.2.1.2.2. . . . . . . . . . ....

              3. 9.2.1.2.3. . . . . . . . . . ....

              4. 9.2.1.2.4. . . . . . . . . . ....

            3. 9.2.1.3. Procedure

              1. 9.2.1.3.1. General

              2. 9.2.1.3.2. Assessment using a checking template

              3. 9.2.1.3.3. Measurement using a photoelectric device

            4. 9.2.1.4. Expression of results

            5. 9.2.1.5. Alternative method

            6. 9.2.1.6. . . . . . . . . . ....

            7. 9.2.1.7. . . . . . . . . . ....

            8. 9.2.1.8. . . . . . . . . . ....

          2. 9.2.2. . . . . . . . . . ....

            1. 9.2.2.1. . . . . . . . . . ....

            2. 9.2.2.2. Tractor type

          3. 9.2.3. Indices of difficulty of the secondary characteristics

            1. 9.2.3.1. Nature of the material

            2. 9.2.3.2. Other secondary characteristics

          4. 9.2.4. Number of samples

          5. 9.2.5. Definition of the zone of vision of tractor windscreens.

            1. 9.2.5.1. . . . . . . . . . ....

              1. 9.2.5.1.1. . . . . . . . . . ....

              2. 9.2.5.1.2. . . . . . . . . . ....

            2. 9.2.5.2. . . . . . . . . . ....

            3. 9.2.5.3. . . . . . . . . . ....

          6. 9.2.6. Interpretation of results

            1. 9.2.6.1. . . . . . . . . . ....

            2. 9.2.6.2. . . . . . . . . . ....

        3. 9.3. Secondary-image separation test

          1. 9.3.1. Scope

            1. 9.3.1.1. Target test

              1. 9.3.1.1.1. Apparatus

              2. 9.3.1.1.2. Procedure

              3. 9.3.1.1.3. Expression of results

            2. 9.3.1.2. Collimation telescope test

              1. 9.3.1.2.1. Apparatus

              2. 9.3.1.2.2. Procedure

              3. 9.3.1.2.2. . . . . . . . . . ....

              4. 9.3.1.2.3. Expression of results

            3. 9.3.1.3. . . . . . . . . . ....

          2. 9.3.2. . . . . . . . . . ....

            1. 9.3.2.1. Tractor type

          3. 9.3.3. Indices of difficulty of the secondary characteristics

            1. 9.3.3.1. Nature of the material

            2. 9.3.3.2. Other secondary characteristics

          4. 9.3.4. Number of samples

          5. 9.3.5. Interpretation of results

            1. 9.3.5.1. . . . . . . . . . ....

            2. 9.3.5.2. . . . . . . . . . ....

        4. 9.4. Identification of colours test

      10. 10. FIRE-RESISTANCE TEST

        1. 10.1. Purpose and scope of application

        2. 10.2. Definitions

          1. 10.2.1. . . . . . . . . . ....

          2. 10.2.2. . . . . . . . . . ....

          3. 10.2.3. . . . . . . . . . ....

        3. 10.3. Principle

        4. 10.4. Apparatus

          1. 10.4.1. . . . . . . . . . ....

          2. 10.4.2. . . . . . . . . . ....

          3. 10.4.3. . . . . . . . . . ....

          4. 10.4.4. . . . . . . . . . ....

          5. 10.4.5. . . . . . . . . . ....

          6. 10.4.6. . . . . . . . . . ....

          7. 10.4.7. . . . . . . . . . ....

        5. 10.5. Samples

          1. 10.5.1. Shape and dimensions

          2. 10.5.2. Sampling

          3. 10.5.3. Conditioning

        6. 10.6. Procedure

          1. 10.6.1. . . . . . . . . . ....

          2. 10.6.2. . . . . . . . . . ....

          3. 10.6.3. . . . . . . . . . ....

          4. 10.6.4. . . . . . . . . . ....

          5. 10.6.5. . . . . . . . . . ....

          6. 10.6.6. . . . . . . . . . ....

          7. 10.6.7. . . . . . . . . . ....

          8. 10.6.8. . . . . . . . . . ....

        7. 10.7. Calculation

        8. 10.8. Indices of difficulty of the secondary characteristics

        9. 10.9. Interpretation of results

      11. 11. TESTING OF RESISTANCE TO CHEMICAL AGENTS

        1. 11.1. Chemical agents to be used

          1. 11.1.1. . . . . . . . . . ....

          2. 11.1.2. . . . . . . . . . ....

          3. 11.1.3. . . . . . . . . . ....

          4. 11.1.4. . . . . . . . . . ....

          5. 11.1.5. . . . . . . . . . ....

        2. 11.2. Test method

        3. 11.3. Indices of difficulty of the secondary characteristics

        4. 11.4. Interpretation of the results

          1. 11.4.1. . . . . . . . . . ....

          2. 11.4.2. . . . . . . . . . ....

            1. 11.4.2.1. . . . . . . . . . ....

            2. 11.4.2.2. . . . . . . . . . ....

    6. ANNEX III D

      TOUGHENED-GLASS WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

            1. 1.1.2.1. . . . . . . . . . ....

            2. 1.1.2.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

          4. 1.2.4. . . . . . . . . . ....

      2. 2. FRAGMENTATION TEST

        1. 2.1. Indices of difficulty of the secondary characteristics

          1. 2.1.1. . . . . . . . . . ....

          2. 2.1.2. . . . . . . . . . ....

          3. 2.1.3. . . . . . . . . . ....

          4. 2.1.4. . . . . . . . . . ....

        2. 2.2. Number of samples

        3. 2.3. Different zones of glass

          1. 2.3.1. . . . . . . . . . ....

          2. 2.3.2. . . . . . . . . . ....

            1. 2.3.2.1. . . . . . . . . . ....

            2. 2.3.2.2. . . . . . . . . . ....

            3. 2.3.2.3. . . . . . . . . . ....

          3. 2.3.3. . . . . . . . . . ....

        4. 2.4. Test method

        5. 2.5. Points of impact (see Annex III N, Figure 2).

          1. 2.5.1. . . . . . . . . . ....

          2. 2.5.2. . . . . . . . . . ....

        6. 2.6. Interpretation of results

          1. 2.6.1. . . . . . . . . . ....

            1. 2.6.1.1. Zone FI

              1. 2.6.1.1.1. . . . . . . . . . ....

              2. 2.6.1.1.2. . . . . . . . . . ....

              3. 2.6.1.1.3. . . . . . . . . . ....

              4. 2.6.1.1.4. . . . . . . . . . ....

              5. 2.6.1.1.5. . . . . . . . . . ....

            2. 2.6.1.2. Zone FII

              1. 2.6.1.2.1. . . . . . . . . . ....

              2. 2.6.1.2.2. . . . . . . . . . ....

              3. 2.6.1.2.3. . . . . . . . . . ....

              4. 2.6.1.2.4. . . . . . . . . . ....

                1. 2.6.1.2.4.1. . . . . . . . . . ....

              5. 2.6.1.2.5. . . . . . . . . . ....

            3. 2.6.1.3. Zone FIII

          2. 2.6.2. . . . . . . . . . ....

            1. 2.6.2.1. . . . . . . . . . ....

            2. 2.6.2.2. . . . . . . . . . ....

            3. 2.6.2.3. . . . . . . . . . ....

          3. 2.6.3. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Indices of difficulty of the secondary characteristics

        2. 3.2. Number of samples

          1. 3.2.1. . . . . . . . . . ....

          2. 3.2.2. . . . . . . . . . ....

        3. 3.3. Test method

          1. 3.3.1. . . . . . . . . . ....

          2. 3.3.2. . . . . . . . . . ....

        4. 3.4. Interpretation of results

          1. 3.4.1. . . . . . . . . . ....

          2. 3.4.2. . . . . . . . . . ....

            1. 3.4.2.1. . . . . . . . . . ....

            2. 3.4.2.2. . . . . . . . . . ....

      4. 4. OPTICAL QUALITIES

    7. ANNEX III E

      UNIFORMLY TOUGHENED-GLASS PANES OTHER THAN WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

            1. 1.1.3.1. . . . . . . . . . ....

            2. 1.1.3.2. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

      2. 2. FRAGMENTATION TEST

        1. 2.1. Indices of difficulty of the secondary characteristics

        2. 2.2 Selection of samples

          1. 2.2.1. . . . . . . . . . ....

            1. 2.2.1.1. . . . . . . . . . ....

              1. 2.2.1.1.1. . . . . . . . . . ....

              2. 2.2.1.1.2. . . . . . . . . . ....

            2. 2.2.1.2. . . . . . . . . . ....

              1. 2.2.1.2.1. . . . . . . . . . ....

              2. 2.2.1.2.2. . . . . . . . . . ....

              3. 2.2.1.2.3. . . . . . . . . . ....

          2. 2.2.2. . . . . . . . . . ....

          3. 2.2.3. . . . . . . . . . ....

          4. 2.2.4. . . . . . . . . . ....

        3. 2.3. Number of samples per set

        4. 2.4. Test method

          1. 2.4.1. . . . . . . . . . ....

        5. 2.5. Points of impact (see Annex III N, Figure 3)

          1. 2.5.1. . . . . . . . . . ....

          2. 2.5.2. . . . . . . . . . ....

        6. 2.6. Interpretation of results

          1. 2.6.1. . . . . . . . . . ....

            1. 2.6.1.1. . . . . . . . . . ....

            2. 2.6.1.2. . . . . . . . . . ....

            3. 2.6.1.3. . . . . . . . . . ....

            4. 2.6.1.4. . . . . . . . . . ....

            5. 2.6.1.5. . . . . . . . . . ....

          2. 2.6.2. . . . . . . . . . ....

            1. 2.6.2.1. . . . . . . . . . ....

            2. 2.6.2.2. . . . . . . . . . ....

            3. 2.6.2.3. . . . . . . . . . ....

          3. 2.6.3. . . . . . . . . . ....

      3. 3. MECHANICAL STRENGTH TEST

        1. 3.1. 227-g-ball test

          1. 3.1.1. Indices of difficulty of the secondary characteristics.

          2. 3.1.2. Number of test pieces

          3. 3.1.3. Test method

            1. 3.1.3.1. . . . . . . . . . ....

            2. 3.1.3.2. . . . . . . . . . ....

          4. 3.1.4. Interpretation of results

            1. 3.1.4.1. . . . . . . . . . ....

            2. 3.1.4.2. . . . . . . . . . ....

              1. 3.1.4.2.1. . . . . . . . . . ....

              2. 3.1.4.2.2. . . . . . . . . . ....

      4. 4. OPTICAL QUALITIES

        1. 4.1. . . . . . . . . . ....

    8. ANNEX III F

      ORDINARY LAMINATED-GLASS WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

          6. 1.1.6. . . . . . . . . . ....

        2. 1.2 The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

          4. 1.2.4. . . . . . . . . . ....

          5. 1.2.5. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Indices of difficulty of the secondary characteristics

        2. 3.2. Headform test on a complete windscreen

          1. 3.2.1. Number of samples

          2. 3.2.2. Test method

            1. 3.2.2.1. . . . . . . . . . ....

            2. 3.2.2.2. . . . . . . . . . ....

          3. 3.2.3. Interpretation of results

            1. 3.2.3.1. . . . . . . . . . ....

              1. 3.2.3.1.1. . . . . . . . . . ....

              2. 3.2.3.1.2. . . . . . . . . . ....

              3. 3.2.3.1.3. . . . . . . . . . ....

                1. 3.2.3.1.3.1. . . . . . . . . . ....

                2. 3.2.3.1.3.2. . . . . . . . . . ....

            2. 3.2.3.2. . . . . . . . . . ....

              1. 3.2.3.2.1. . . . . . . . . . ....

              2. 3.2.3.2.2. . . . . . . . . . ....

        3. 3.3. Head form test on flat test pieces

          1. 3.3.1. Number of test pieces

          2. 3.3.2. Test method

            1. 3.3.2.1. . . . . . . . . . ....

            2. 3.3.2.2. . . . . . . . . . ....

          3. 3.3.3. Interpretation of results

            1. 3.3.3.1. . . . . . . . . . ....

              1. 3.3.3.1.1. . . . . . . . . . ....

              2. 3.3.3.1.2. . . . . . . . . . ....

              3. 3.3.3.1.3. . . . . . . . . . ....

            2. 3.3.3.2. . . . . . . . . . ....

              1. 3.3.3.2.1. . . . . . . . . . ....

              2. 3.3.3.2.2. . . . . . . . . . ....

      4. 4. MECHANICAL STRENGTH TEST

        1. 4.1. Indices of difficulty of the secondary characteristics

        2. 4.2. 2 260-g-ball test

          1. 4.2.1. Number of test pieces

          2. 4.2.2. Test method

            1. 4.2.2.1. . . . . . . . . . ....

            2. 4.2.2.2. . . . . . . . . . ....

          3. 4.2.3. Interpretation of results

            1. 4.2.3.1. . . . . . . . . . ....

            2. 4.2.3.2. . . . . . . . . . ....

              1. 4.2.3.2.1. . . . . . . . . . ....

              2. 4.2.3.2.2. . . . . . . . . . ....

        3. 4.3. 227-g-ball test

          1. 4.3.1. Indices of difficulty of the secondary characteristics

          2. 4.3.2. Number of test pieces

          3. 4.3.3. Test method

            1. 4.3.3.1. . . . . . . . . . ....

            2. 4.3.3.2. . . . . . . . . . ....

          4. 4.3.4. Interpretation of results

            1. 4.3.4.1. . . . . . . . . . ....

            2. 4.3.4.2. . . . . . . . . . ....

              1. 4.3.4.2.1. . . . . . . . . . ....

              2. 4.3.4.2.2. . . . . . . . . . ....

      5. 5. TEST OF RESISTANCE TO THE ENVIRONMENT

        1. 5.1. Test of resistance to abrasion

          1. 5.1.1. Indices of difficulty and test method

          2. 5.1.2. Interpretation of results

        2. 5.2. Test of resistance to high temperature

        3. 5.3. Resistance-to-radiation test

          1. 5.3.1. General requirement

          2. 5.3.2. . . . . . . . . . ....

        4. 5.4. Resistance-to-humidity test

      6. 6. OPTICAL QUALITIES

    9. ANNEX III G

      LAMINATED-GLASS PANES OTHER THAN WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

        3. 2.3. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Indices of difficulty of the secondary characteristics

        2. 3.2. Number of test pieces

        3. 3.3. Test method

          1. 3.3.1. . . . . . . . . . ....

          2. 3.3.2. . . . . . . . . . ....

        4. 3.4. Interpretation of results

          1. 3.4.1. . . . . . . . . . ....

            1. 3.4.1.1. . . . . . . . . . ....

            2. 3.4.1.2. . . . . . . . . . ....

            3. 3.4.1.3. . . . . . . . . . ....

          2. 3.4.2. . . . . . . . . . ....

            1. 3.4.2.1. . . . . . . . . . ....

            2. 3.4.2.2. . . . . . . . . . ....

      4. 4. MECHANICAL STRENGTH TEST — 227-g-BALL TEST

        1. 4.1. Indices of difficulty of the secondary characteristics

        2. 4.2. Number of test pieces

        3. 4.3. Test method

          1. 4.3.1. . . . . . . . . . ....

          2. 4.3.2. . . . . . . . . . ....

        4. 4.4. Interpretation of results

          1. 4.4.1. . . . . . . . . . ....

          2. 4.4.2. . . . . . . . . . ....

            1. 4.4.2.1. . . . . . . . . . ....

            2. 4.4.2.2. . . . . . . . . . ....

      5. 5. TEST OF RESISTANCE TO THE ENVIRONMENT

        1. 5.1. Test of resistance to abrasion

          1. 5.1.1. Indices of difficulty and test method

          2. 5.1.2. Interpretation of results

        2. 5.2. Test of resistance to high temperature

        3. 5.3. Resistance-to-radiation test

          1. 5.3.1. General requirement

          2. 5.3.2. . . . . . . . . . ....

        4. 5.4. Resistance-to-humidity test

          1. 5.4.1. . . . . . . . . . ....

      6. 6. OPTICAL QUALITIES

        1. 6.1. Light transmittance

    10. ANNEX III H

      TREATED LAMINATED-GLASS WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

          6. 1.1.6. . . . . . . . . . ....

          7. 1.1.7. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

          4. 1.2.4. . . . . . . . . . ....

          5. 1.2.5. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

      3. 3. TESTS PRESCRIBED

        1. 3.1. . . . . . . . . . ....

        2. 3.2. . . . . . . . . . ....

      4. 4. FRAGMENTATION TEST

        1. 4.1. Indices of difficulty of the secondary characteristics

        2. 4.2. Number of test pieces or samples

        3. 4.3. Test method

        4. 4.4. Impact point or points

        5. 4.5. Interpretation of results

          1. 4.5.1. . . . . . . . . . ....

            1. 4.5.1.1. In the case of a sample:

              1. 4.5.1.1.1. . . . . . . . . . ....

              2. 4.5.1.1.2. . . . . . . . . . ....

              3. 4.5.1.1.3. . . . . . . . . . ....

            2. 4.5.1.2. . . . . . . . . . ....

          2. 4.5.2. . . . . . . . . . ....

            1. 4.5.2.1. . . . . . . . . . ....

            2. 4.5.2.2. . . . . . . . . . ....

    11. ANNEX III I

      SAFETY-GLASS PANES FACED WITH PLASTIC MATERIAL ON THE INSIDE

      1. 1. DEFINITION OF TYPE

      2. 2. TEST OF RESISTANCE TO ABRASION

        1. 2.1. Indices of difficulty and test method

        2. 2.2. Interpretation of results

      3. 3. RESISTANCE-TO-HUMIDITY TEST

        1. 3.1. . . . . . . . . . ....

        2. 3.2. . . . . . . . . . ....

      4. 4. TEST OF RESISTANCE TO TEMPERATURE CHANGES

      5. 5. FIRE-RESISTANCE TEST

      6. 6. TEST OF RESISTANCE TO CHEMICALS

    12. ANNEX III J

      GLASS-PLASTIC WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

          6. 1.1.6. . . . . . . . . . ....

          7. 1.1.7. . . . . . . . . . ....

          8. 1.1.8. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

          4. 1.2.4. . . . . . . . . . ....

          5. 1.2.5. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Indices of difficulty of the secondary characteristics

        2. 3.2. Headform test on a complete windscreen

          1. 3.2.1. Number of samples

          2. 3.2.2. Test method

            1. 3.2.2.1. . . . . . . . . . ....

            2. 3.2.2.2. . . . . . . . . . ....

          3. 3.2.3. Interpretation of results

            1. 3.2.3.1. . . . . . . . . . ....

              1. 3.2.3.1.1. . . . . . . . . . ....

              2. 3.2.3.1.2. . . . . . . . . . ....

              3. 3.2.3.1.3. . . . . . . . . . ....

            2. 3.2.3.2. . . . . . . . . . ....

              1. 3.2.3.2.1. . . . . . . . . . ....

              2. 3.2.3.2.2. . . . . . . . . . ....

        3. 3.3. Headform test on flat test pieces

          1. 3.3.1. Number of test pieces

          2. 3.3.2. Test method

            1. 3.3.2.1. . . . . . . . . . ....

            2. 3.3.2.2. . . . . . . . . . ....

          3. 3.3.3. Interpretation of results

            1. 3.3.3.1. . . . . . . . . . ....

              1. 3.3.3.1.1. . . . . . . . . . ....

              2. 3.3.3.1.2. . . . . . . . . . ....

              3. 3.3.3.1.3. . . . . . . . . . ....

            2. 3.3.3.2. . . . . . . . . . ....

              1. 3.3.3.2.1. . . . . . . . . . ....

              2. 3.3.3.2.2. . . . . . . . . . ....

      4. 4. MECHANICAL STRENGTH TEST

        1. 4.1. Indices of difficulty, test method and interpretation of results

        2. 4.2. . . . . . . . . . ....

      5. 5. TEST OF RESISTANCE TO THE ENVIRONMENT

        1. 5.1. Test of resistance to abrasion

          1. 5.1.1. Test of resistance to abrasion on the outer face

            1. 5.1.1.1. . . . . . . . . . ....

          2. 5.1.2. Test of resistance to abrasion on the inner face

            1. 5.1.2.1. . . . . . . . . . ....

        2. 5.2. Test of resistance to high temperature

        3. 5.3. Resistance-to-radiation test

        4. 5.4. Resistance-to-humidity test

        5. 5.5. Test of resistance to temperature changes

      6. 6. OPTICAL QUALITIES

      7. 7. FIRE-RESISTANCE TEST

      8. 8. TEST OF RESISTANCE TO CHEMICALS

    13. ANNEX III K

      GLASS-PLASTIC PANES OTHER THAN WINDSCREENS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

          6. 1.1.6. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are as follows:

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

        3. 2.3. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Indices of difficulty of the secondary characteristics

        2. 3.2. Number of test pieces

        3. 3.3. Test method

          1. 3.3.1. . . . . . . . . . ....

          2. 3.3.2. . . . . . . . . . ....

        4. 3.4. Interpretation of results

          1. 3.4.1. . . . . . . . . . ....

            1. 3.4.1.1. . . . . . . . . . ....

            2. 3.4.1.2. . . . . . . . . . ....

            3. 3.4.1.3. . . . . . . . . . ....

          2. 3.4.2. . . . . . . . . . ....

            1. 3.4.2.1. . . . . . . . . . ....

            2. 3.4.2.2. . . . . . . . . . ....

      4. 4. MECHANICAL STRENGTH TEST — 227-g-BALL TEST

        1. 4.1. . . . . . . . . . ....

        2. 4.2. . . . . . . . . . ....

      5. 5. TEST OF RESISTANCE TO THE ENVIRONMENT

        1. 5.1. Test of resistance to abrasion

          1. 5.1.1. Test of resistance to abrasion on the outer face

          2. 5.1.2. Test of resistance to abrasion on the inner face

        2. 5.2. Test of resistance to high temperature

        3. 5.3. Resistance-to-radiation test

        4. 5.4. Resistance-to-humidity test

        5. 5.5. Test of resistance to temperature changes

      6. 6. OPTICAL QUALITIES

      7. 7. FIRE-RESISTANCE TEST

      8. 8. TEST RESISTANCE TO CHEMICALS

    14. ANNEX III L

      DOUBLE-GLAZED UNITS

      1. 1. DEFINITION OF TYPE

        1. 1.1. The principal characteristics are as follows:

          1. 1.1.1. . . . . . . . . . ....

          2. 1.1.2. . . . . . . . . . ....

          3. 1.1.3. . . . . . . . . . ....

          4. 1.1.4. . . . . . . . . . ....

          5. 1.1.5. . . . . . . . . . ....

        2. 1.2. The secondary characteristics are:

          1. 1.2.1. . . . . . . . . . ....

      2. 2. GENERAL

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

        3. 2.3. . . . . . . . . . ....

      3. 3. HEADFORM TEST

        1. 3.1. Index of difficulty of the secondary characteristics

        2. 3.2. Number of test pieces

        3. 3.3. Test method

          1. 3.3.1. . . . . . . . . . ....

          2. 3.3.2. . . . . . . . . . ....

          3. 3.3.3. . . . . . . . . . ....

        4. 3.4. Interpretation of results

          1. 3.4.1. . . . . . . . . . ....

          2. 3.4.2. . . . . . . . . . ....

            1. 3.4.2.1. . . . . . . . . . ....

            2. 3.4.2.2. . . . . . . . . . ....

            3. 3.4.2.3. . . . . . . . . . ....

          3. 3.4.3. . . . . . . . . . ....

            1. 3.4.3.1. . . . . . . . . . ....

            2. 3.4.3.2. . . . . . . . . . ....

            3. 3.4.3.3. . . . . . . . . . ....

            4. 3.4.3.4. . . . . . . . . . ....

          4. 3.4.4. . . . . . . . . . ....

            1. 3.4.4.1. . . . . . . . . . ....

            2. 3.4.4.2. . . . . . . . . . ....

      4. 4. OPTICAL QUALITIES

    15. ANNEX III M

      GROUPING OF WINDSCREENS FOR COMPONENT TYPE-APPROVAL TESTING

      1. 1. . . . . . . . . . ....

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

      2. 2. . . . . . . . . . ....

      3. 3. . . . . . . . . . ....

      4. 4. . . . . . . . . . ....

      5. 5. . . . . . . . . . ....

      6. 6. . . . . . . . . . ....

        1. 6.1. . . . . . . . . . ....

        2. 6.2 . . . . . . . . . ....

      7. 7. . . . . . . . . . ....

      8. 8. . . . . . . . . . ....

      9. 9. . . . . . . . . . ....

        1. 9.1. . . . . . . . . . ....

        2. 9.2. . . . . . . . . . ....

        3. 9.3. . . . . . . . . . ....

          1. 9.3.1. . . . . . . . . . ....

            1. 9.3.1.1. . . . . . . . . . ....

              1. 9.3.1.1.1. . . . . . . . . . ....

              2. 9.3.1.1.2. . . . . . . . . . ....

              3. 9.3.1.1.3. . . . . . . . . . ....

              4. 9.3.1.1.4. . . . . . . . . . ....

              5. 9.3.1.1.5. . . . . . . . . . ....

            2. 9.3.1.2. . . . . . . . . . ....

              1. 9.3.1.2.1. . . . . . . . . . ....

              2. 9.3.1.2.2. . . . . . . . . . ....

              3. 9.3.1.2.3. . . . . . . . . . ....

              4. 9.3.1.2.4. . . . . . . . . . ....

            3. 9.3.1.3. . . . . . . . . . ....

            4. 9.3.1.4. . . . . . . . . . ....

          2. 9.3.2. . . . . . . . . . ....

    16. ANNEX III N

      MEASUREMENT OF THE HEIGHTS OF SEGMENT AND POSITION OF THE POINTS OF IMPACT

      1. . . . . . . . . . ....

      2. . . . . . . . . . ....

      3. . . . . . . . . . ....

      4. . . . . . . . . . ....

      5. . . . . . . . . . ....

    17. ANNEX III O

      CHECKS ON CONFORMITY OF PRODUCTION

      1. 1. DEFINITIONS

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. . . . . . . . . . ....

        5. 1.5. . . . . . . . . . ....

        6. 1.6. . . . . . . . . . ....

        7. 1.7. . . . . . . . . . ....

      2. 2. TESTS

        1. 2.1. Toughened-glass windscreens

          1. 2.1.1. . . . . . . . . . ....

          2. 2.1.2. . . . . . . . . . ....

          3. 2.1.3. . . . . . . . . . ....

          4. 2.1.4. . . . . . . . . . ....

        2. 2.2. Uniformly toughened glass panes

          1. 2.2.1. . . . . . . . . . ....

          2. 2.2.2. . . . . . . . . . ....

          3. 2.2.3. . . . . . . . . . ....

            1. 2.2.3.1. . . . . . . . . . ....

            2. 2.2.3.2. . . . . . . . . . ....

        3. 2.3. Ordinary laminated-glass windscreens and glass-plastic windscreens

          1. 2.3.1. . . . . . . . . . ....

          2. 2.3.2. . . . . . . . . . ....

          3. 2.3.3. . . . . . . . . . ....

          4. 2.3.4. . . . . . . . . . ....

          5. 2.3.5. . . . . . . . . . ....

          6. 2.3.6. . . . . . . . . . ....

          7. 2.3.7. . . . . . . . . . ....

            1. 2.3.7.1. . . . . . . . . . ....

            2. 2.3.7.2. . . . . . . . . . ....

            3. 2.3.7.3. . . . . . . . . . ....

        4. 2.4. Ordinary lamirated-glass and glass-plastic panes other than windscreens

          1. 2.4.1. . . . . . . . . . ....

          2. 2.4.2. . . . . . . . . . ....

          3. 2.4.3. . . . . . . . . . ....

          4. 2.4.4. . . . . . . . . . ....

            1. 2.4.4.1. . . . . . . . . . ....

            2. 2.4.4.2. . . . . . . . . . ....

            3. 2.4.4.3. . . . . . . . . . ....

          5. 2.4.5. . . . . . . . . . ....

        5. 2.5. Treated laminated-glass windscreens

          1. 2.5.1. . . . . . . . . . ....

        6. 2.6. Glass panes faced with plastic material

          1. 2.6.1. . . . . . . . . . ....

          2. 2.6.2. . . . . . . . . . ....

          3. 2.6.3. . . . . . . . . . ....

        7. 2.7. Double-glazed units

      3. 3. FREQUENCY OF TESTS AND RESULTS

        1. 3.1. Fragmentation

          1. 3.1.1. Tests

            1. 3.1.1.1. . . . . . . . . . ....

            2. 3.1.1.2. . . . . . . . . . ....

            3. 3.1.1.3. . . . . . . . . . ....

            4. 3.1.1.4. . . . . . . . . . ....

            5. 3.1.1.5. . . . . . . . . . ....

            6. 3.1.1.6. . . . . . . . . . ....

          2. 3.1.2. Results

        2. 3.2. Headform impact test

          1. 3.2.1. Tests

          2. 3.2.2. Results

        3. 3.3. 2 260-g-ball impact test

          1. 3.3.1. Tests

          2. 3.3.2. Results

        4. 3.4. 227-g-ball impact test

          1. 3.4.1. Tests

          2. 3.4.2. Results

        5. 3.5. High temperature

          1. 3.5.1. Tests

          2. 3.5.2. Results

        6. 3.6. Light transmission

          1. 3.6.1. Tests

          2. 3.6.2. Results

        7. 3.7. Optical distortion and secondary-image separation

          1. 3.7.1. Tests

          2. 3.7.2. Results

        8. 3.8. Resistance to abrasion

          1. 3.8.1. Tests

          2. 3.8.2. Results

        9. 3.9. Resistance to humidity

          1. 3.9.1. Tests

          2. 3.9.2. Results

        10. 3.10. Resistance to chemicals

          1. 3.10.1. Tests

          2. 3.10.2. Results

    18. ANNEX III P

      MODEL

      1. . . . . . . . . . ....

    19. ANNEX IV

      MECHANICAL COUPLINGS BETWEEN TRACTOR AND TOWED VEHICLE AND VERTICAL LOAD ON THE COUPLING POINT

      1. 1. Definitions

        1. 1.1. . . . . . . . . . ....

        2. 1.2. . . . . . . . . . ....

          1. 1.2.1. . . . . . . . . . ....

          2. 1.2.2. . . . . . . . . . ....

          3. 1.2.3. . . . . . . . . . ....

          4. 1.2.4. . . . . . . . . . ....

          5. 1.2.5. . . . . . . . . . ....

        3. 1.3. . . . . . . . . . ....

        4. 1.4. . . . . . . . . . ....

        5. 1.5. . . . . . . . . . ....

        6. 1.6. . . . . . . . . . ....

        7. 1.7. . . . . . . . . . ....

        8. 1.8. . . . . . . . . . ....

        9. 1.9. . . . . . . . . . ....

      2. 2. General requirements

        1. 2.1. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

        3. 2.3. . . . . . . . . . ....

        4. 2.4. . . . . . . . . . ....

        5. 2.5. . . . . . . . . . ....

        6. 2.6. . . . . . . . . . ....

        7. 2.7. . . . . . . . . . ....

        8. 2.8. . . . . . . . . . ....

        9. 2.9. . . . . . . . . . ....

      3. 3. Special requirements

        1. 3.1. Dimensions

        2. 3.2. Strength

          1. 3.2.1. . . . . . . . . . ....

          2. 3.2.2. . . . . . . . . . ....

        3. 3.3. Vertical load on the coupling point (S)

          1. 3.3.1. . . . . . . . . . ....

          2. 3.3.2. . . . . . . . . . ....

            1. 3.3.2.1. . . . . . . . . . ....

            2. 3.3.2.2. . . . . . . . . . ....

        4. 3.4. Height above the ground of the coupling device (h)

          1. 3.4.1. . . . . . . . . . ....

      4. 4. Application for EEC component type-approval

        1. 4.1. . . . . . . . . . ....

        2. 4.2. . . . . . . . . . ....

      5. 5. Inscriptions

        1. 5.1. . . . . . . . . . ....

          1. 5.1.1. . . . . . . . . . ....

          2. 5.1.2. . . . . . . . . . ....

          3. 5.1.3. . . . . . . . . . ....

          4. 5.1.4. . . . . . . . . . ....

        2. 5.2. . . . . . . . . . ....

      6. 6. Instructions for use

      7. Appendix 1

        DRAWINGS OF MECHANICAL COUPLING COMPONENTS

        1. . . . . . . . . . ....

        2. . . . . . . . . . ....

        3. . . . . . . . . . ....

        4. . . . . . . . . . ....

        5. . . . . . . . . . ....

        6. . . . . . . . . . ....

        7. . . . . . . . . . ....

      8. Appendix 2

        DYNAMIC TEST METHOD

        1. 1. TEST PROCEDURE

        2. 2. TEST CRITERIA

        3. 3. TEST PROCEDURE

          1. 3.1. General requirements

          2. 3.2. Test forces

      9. Appendix 3

        COUPLING DEVICE

        1. 1. TEST SPECIFICATIONS

          1. 1.1. General

            1. 1.1.1. . . . . . . . . . ....

          2. 1.2. Test preparation

          3. 1.3. Test instruments

          4. 1.4. Test procedure

            1. 1.4.1. . . . . . . . . . ....

              1. 1.4.1.1. . . . . . . . . . ....

            2. 1.4.2. . . . . . . . . . ....

              1. 1.4.2.1. . . . . . . . . . ....

              2. 1.4.2.2. . . . . . . . . . ....

          5. 1.5. . . . . . . . . . ....

      10. Appendix 4

        COMPONENT TYPE-APPROVAL MARK

        1. . . . . . . . . . ....

        2. . . . . . . . . . ....

        3. . . . . . . . . . ....

        4. . . . . . . . . . ....

      11. Appendix 5

        MODEL EEC COMPONENT TYPE-APPROVAL CERTIFICATE

      12. Appendix 6

        CONDITIONS FOR GRANTING EEC TYPE-APPROVAL

        1. 1. . . . . . . . . . ....

        2. 2. . . . . . . . . . ....

        3. 3. . . . . . . . . . ....

        4. 4. . . . . . . . . . ....

        5. 5. . . . . . . . . . ....

          1. 5.1. . . . . . . . . . ....

          2. 5.2. . . . . . . . . . ....

          3. 5.3. . . . . . . . . . ....

        6. 6. . . . . . . . . . ....

        7. 7. . . . . . . . . . ....

      13. Appendix 7

        MODEL

    20. ANNEX V

      LOCATION AND METHOD OF AFFIXING STATUTORY PLATES AND INSCRIPTIONS ON THE BODY OF THE TRACTOR

      1. 1. GENERAL

        1. 1.1. . . . . . . . . . ....

      2. 2. MANUFACTURER'S PLATE

        1. 2.1. . . . . . . . . . ....

          1. 2.1.1. . . . . . . . . . ....

          2. 2.1.2. . . . . . . . . . ....

          3. 2.1.3. . . . . . . . . . ....

          4. 2.1.4. . . . . . . . . . ....

          5. 2.1.5. . . . . . . . . . ....

          6. 2.1.6. . . . . . . . . . ....

          7. 2.1.7. . . . . . . . . . ....

          8. 2.1.8. . . . . . . . . . ....

        2. 2.2. . . . . . . . . . ....

      3. 3. TRACTOR IDENTIFICATION NUMBER

        1. 3.1. . . . . . . . . . ....

          1. 3.1.1. . . . . . . . . . ....

          2. 3.1.2. . . . . . . . . . ....

          3. 3.1.3. . . . . . . . . . ....

      4. 4. CHARACTERS

        1. 4.1. . . . . . . . . . ....

        2. 4.2. . . . . . . . . . ....

          1. 4.2.1. . . . . . . . . . ....

          2. 4.2.2. . . . . . . . . . ....

            1. 4.2.2.1. . . . . . . . . . ....

            2. 4.2.2.2. . . . . . . . . . ....

              1. Example of manufacturer's plate

      5. Appendix

        MODEL

    21. ANNEX VI

      BRAKE CONTROL OF TOWED VEHICLES AND BRAKE COUPLING BETWEEN THE TRACTOR AND TOWED VEHICLES

      1. 1. . . . . . . . . . ....

      2. 2. . . . . . . . . . ....

      3. 3. . . . . . . . . . ....

        1. 3.1. Hydraulic coupling:

        2. 3.2. Pneumatic coupling:

      4. Appendix

        MODEL

Back to top

Options/Help

Print Options

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources