Search Legislation

The Gas (Meters) (Amendment) Regulations 1993

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)
 Help about opening options

Opening Options

More Resources

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

5.  The following regulation shall be inserted after regulation 3—

Meters not stamped by, or on the authority of, a meter examiner

3A.(1) For the purposes of section 17(1) of the Gas Act 1986 and subject to paragraph (2) below, a meter to which regulation 3(1)(cc) above applies which is manufactured or repaired in a member state of the European Communities other than the United Kingdom may be stamped by, or on the authority of, a person other than a meter examiner, if that person is authorised by the Secretary of State for the purposes of this regulation (“an authorised person”).

(2) An authorised person shall not stamp, or authorise the stamping of, any meter unless—

(a)he is satisfied that it is of such pattern and construction and is marked in such manner as is approved by the Secretary of State for the purposes of this regulation; and

(b)he has been provided with the requisite documentation relating to that meter.

(3) In this regulation, “requisite documentation” in relation to any meter means—

(a)the examination report of an approved body that the meter which is the subject of that report conforms to the standards prescribed in regulations 3(1)(a) and 3(1)(cc) above, and

(b)if requested by an authorised person the results of the tests on which the examination report is based.

(4) For the purposes of this regulation, a body making an examination report in respect of a meter is an “approved body” if it is the body in the member state in which the meter has been manufactured or repaired which has responsibility for the metrological control of gas volume meters or is a laboratory which has been accredited in that member state as being a body which conforms with the criteria set out in EN 45001(1)..

(1)

EN 45001 is a European Standard which has the status of the British Standard; it is identical with BS 7501(ISBN 0 580 17939 7), “General criteria for the operation of testing laboratories”, published by the British Standards Institution and having effect from 31st October 1989.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources