Search Legislation

The Toys (Safety) Regulations 2011

 Help about what version

What Version

 Help about opening options

Opening OptionsExpand opening options

Changes to legislation:

There are currently no known outstanding effects for the The Toys (Safety) Regulations 2011. Help about Changes to Legislation

  1. Introductory Text

  2. Expand +/Collapse -

    PART 1 Preliminary

    1. 1.Citation and commencement

    2. 2.Revocation, saving and amendment

    3. 2A.Transitional provision in relation to EU Exit

    4. 3.Interpretation

    5. 3A.Designated standard

    6. 3B.Annexes to EU legislation as Schedules

    7. 4.Toys to which these Regulations apply

    8. 5.Essential safety requirements

    9. 6.Particular safety requirements for toys placed on the market before 20th July 2013

    10. 7.Presumption of conformity

    11. 8.Exception for trade fairs or exhibitions

    12. 9.Parts 1 and 2 are safety regulations within the meaning of the 1987 Act

  3. Expand +/Collapse -

    PART 2 Prohibitions and Obligations on Economic Operators

    1. Manufacturers and their authorised representatives

      1. 10.Prohibitions on placing toys on the market

      2. 11.Design and manufacture of toys in accordance with essential safety requirements

      3. 12.Safety assessment

      4. 13.Applicable conformity assessment procedures

      5. 14.Application for Type examination

      6. 15.Declaration of conformity and UK marking

      7. 15A.UK(NI) indication

      8. 15B.Register of UK notified bodies

      9. 16.(1) The ... declaration of conformity must state that it...

      10. 17.Technical documentation and correspondence relating to Type examination

      11. 18.Toys to bear UK marking

      12. 19.Information identifying toy and manufacturer

      13. 20.Instructions for use, safety information and warnings

      14. 21.Compliance procedures for series production

      15. 22.Submission of Type examination certificate for review

      16. 23.Monitoring of toys

      17. 24.Non-compliant toys and toys presenting a risk

      18. 25.Manufacturer's authorised representative

    2. Importers

      1. 26.Prohibitions on placing toys on the market

      2. 27.Information identifying importer

      3. 28.Storage or transport of toys

      4. 29.Monitoring of toys

      5. 30.Non-compliant toys and toys presenting a risk

      6. 31.Duties to retain and provide information

      7. 32.Duty in certain circumstances to comply with manufacturers' duties in place of importers' duties

    3. Distributors

      1. 33.Duty to act with due care and prohibitions on making toys available on the market

      2. 34.Storage or transport of toys under distributor's responsibility

      3. 35.Non-compliant toys and toys presenting a risk

      4. 36.Duty to provide information

      5. 37.Duty in certain circumstances to comply with manufacturers' duties in place of distributors' duties

    4. All economic operators

      1. 38.Identification of economic operators to enforcement authorities

      2. 39.Protection of UK marking

      3. 39A.Obligations which are met by complying with obligations in the Directive

      4. 39AA.Further use of UK marking

      5. 39AB.Qualifying Northern Ireland Goods

  4. Expand +/Collapse -

    PART 2A Powers and duties of the Secretary of State in relation to toys

    1. 39B.Power to amend Schedules 1, 2 and 5

    2. 39C.Power to amend Appendix C to Schedule 2

    3. 39D.Powers to amend Appendix A to Schedule 2

    4. 39E.Duty of the Secretary of State to evaluate use of hazardous substances

  5. Expand +/Collapse -

    PART 3 Approval of Conformity Assessment Bodies

    1. 40.Designation of UK notified bodies

    2. 40A.Approved bodies

    3. 40B.Approval of conformity assessment bodies

    4. 40C.Presumption of conformity of approved bodies

    5. 40D.Monitoring

    6. 40E.Restriction, suspension or withdrawal of approval

    7. 40F.Operational matters in relation to approved bodies

    8. 40G.Subsidiaries and contractors

    9. 40H.Register of approved bodies

    10. 41.UK national accreditation body

  6. Expand +/Collapse -

    PART 4 Functions of Approved Bodies

    1. 42.Duty to perform Type examinations

    2. 43.Performance of Type examinations

    3. 44.Issue and content of Type examination certificate, and refusal and appeal against refusal to issue certificate

    4. 45.Action (after issue of Type examination certificate) where a toy fails to comply with essential safety requirements

    5. 46.Provision of information by approved bodies to other approved bodies

    6. 47.Instructions to approved bodies in relation to Type examination certificates

    7. 48.Participation by UK notified bodies in sectoral groups of notified bodies

    8. 49.Subcontracting by a UK notified body

    9. 50.Charging of fees by approved body

    10. 51.Provision of information by approved bodies to the Secretary of State

  7. Expand +/Collapse -

    PART 5 Enforcement

    1. 52.Enforcement action in cases of formal non-compliance

    2. 53.Enforcement action in cases of toys presenting a risk

    3. 54.Notification of enforcement action taken in cases of toys presenting a risk

    4. 55.Requirements relating to certain measures taken by enforcement authorities or other persons

    5. 55A.Offence in respect of UK(NI) indication

    6. 56.Commencement of proceedings

    7. 57.Amendment to the General Product Safety Regulations 2005

  8. Expand +/Collapse -

    PART 6 Review

    1. 58.Review

  9. Signature

    1. Expand +/Collapse -

      SCHEDULE 1

      PRODUCTS THAT ARE NOT TOYS (Annex I to the Directive)

      1. 1.Products listed in paragraphs 2 to 20 are not to...

      2. 2.Decorative objects for festivities and celebrations.

      3. 3.Products for collectors, provided that the product or its packaging...

      4. 4.Sports equipment, including roller skates, inline skates, and skateboards intended...

      5. 5.Bicycles with a maximum saddle height of more than 435...

      6. 6.Scooters and other means of transport designed for sport or...

      7. 7.Electrically driven vehicles which are intended to be used for...

      8. 8.Aquatic equipment intended to be used in deep water, and...

      9. 9.Puzzles with more than 500 pieces.

      10. 10.Guns and pistols using compressed gas, with the exception of...

      11. 11.Fireworks, including percussion caps which are not specifically designed for...

      12. 12.Products and games using sharp-pointed missiles, such as sets of...

      13. 13.Functional educational products, such as electric ovens, irons or other...

      14. 14.Products intended for use for educational purposes in schools and...

      15. 15.Electronic equipment, such as personal computers and game consoles, used...

      16. 16.Interactive software, intended for leisure and entertainment, such as computer...

      17. 17.Babies' soothers.

      18. 18.Child-appealing luminaires.

      19. 19.Electrical transformers for toys.

      20. 20.Fashion accessories for children which are not for use in...

    2. Expand +/Collapse -

      SCHEDULE 2

      PARTICULAR SAFETY REQUIREMENTS (Annex II to the Directive)

      1. Expand +/Collapse -

        Part 1 Physical and Mechanical Properties

        1. 1.Toys and their parts and, in the case of fixed...

        2. 2.Accessible edges, protrusions, cords, cables and fastenings on toys must...

        3. 3.Toys must be designed and manufactured in such a way...

        4. 4.(a) Toys and their parts must not present a risk...

        5. 5.Aquatic toys must be designed and manufactured so as to...

        6. 6.Toys which it is possible to get inside and which...

        7. 7.Toys conferring mobility on their users must, as far as...

        8. 8.The form and composition of projectiles and the kinetic energy...

        9. 9.Toys must be manufactured so as to ensure that:

        10. 10.Toys which are designed to emit a sound must be...

        11. 11.Activity toys must be manufactured so as to reduce the...

      2. Expand +/Collapse -

        Part 2 Flammability

        1. 1.Toys must not constitute a dangerous flammable element in the...

        2. 2.Toys which, for reasons essential to their functioning, contain substances...

        3. 3.Toys other than toy percussion caps must not be explosive...

        4. 4.Toys and, in particular, chemical games and toys, must not...

      3. Expand +/Collapse -

        Part 3 Chemical Properties

        1. 1.Toys must be designed and manufactured in such a way...

        2. 2.Toys that are themselves substances or mixtures must comply also...

        3. 3.Without prejudice to the restrictions referred to in the second...

        4. 4.By way of derogation from point 3, substances or mixtures...

        5. 5.By way of derogation from point 3, substances or mixtures...

        6. 6.Points 3, 4 and 5 do not apply to nickel...

        7. 7.Points 3, 4 and 5 do not apply to materials...

        8. 8.Without prejudice to the application of points 3 and 4,...

        9. 9.Not applicable.

        10. 10.Cosmetic toys, such as play cosmetics for dolls, must comply...

        11. 11.Toys must not contain the following allergenic fragrances: No Name...

        12. 12.The use of the fragrances set out in points 41...

        13. 13.Without prejudice to points 3, 4 and 5, the following...

      4. Expand +/Collapse -

        Part 4 Electrical Properties

        1. 1.Toys must not be powered by electricity of a nominal...

        2. 2.Parts of toys which are connected to, or liable to...

        3. 3.Electric toys must be designed and manufactured in such a...

        4. 4.Under foreseeable fault conditions, toys must provide protection against electrical...

        5. 5.Electric toys must provide adequate protection against fire hazards.

        6. 6.Electric toys must be designed and manufactured in such a...

        7. 7.Toys which have an electronic control system must be designed...

        8. 8.Toys must be designed and manufactured in such a way...

        9. 9.The electrical transformer of a toy must not be an...

      5. Expand +/Collapse -

        Part 5 Hygiene

        1. 1.Toys must be designed and manufactured in such a way...

        2. 2.A toy intended for use by children under 36 months...

      6. Part 6 Radioactivity

      7. Appendix A

        List of CMR substances and their permitted uses in accordance with points 4, 5 and 6 of Part III

      8. Appendix B

        Classification of Substances and Mixtures

        1. A1.In this Appendix— “ Regulation (EC) No 1272/2008 ” means...

        2. 1.Criteria for classifying substances and mixtures for the purposes of...

        3. 2.Enactments governing the use of certain substances for the purposes...

        4. 3.Categories of substances and mixtures classified as carcinogenic, mutagenic or...

        5. 4.Categories of substances and mixtures classified as carcinogenic, mutagenic or...

        6. 5.Categories of substances and mixtures classified as carcinogenic, mutagenic or...

      9. Appendix C

        1. Specific limit values for chemicals used in toys intended for...

    3. Expand +/Collapse -

      SCHEDULE 3

      DECLARATION OF CONFORMITY

      1. 1.No (unique identification of the toy(s))

      2. 2.Name and address of the manufacturer or the manufacturer's authorised...

      3. 3.This declaration of conformity is issued under the sole responsibility...

      4. 4.Object of the declaration (identification of toy allowing traceability). It...

      5. 5.The object of the declaration described in point 4 is...

      6. 6.References to the relevant designated standards used, or references to...

      7. 7.Where applicable: the approved body … (name, number) … performed...

      8. 8.Additional information: Signed for and on behalf of: (place and...

    4. Expand +/Collapse -

      SCHEDULE 4

      TECHNICAL DOCUMENTATION (Annex IV to the Directive)

      1. The technical documentation referred to in regulation 17(3) must contain...

    5. Expand +/Collapse -

      SCHEDULE 5

      WARNINGS (Annex V to the Directive)

      1. Expand +/Collapse -

        PART A GENERAL WARNINGS

        1. The user limitations referred to in regulation 20(3) must include...

      2. Expand +/Collapse -

        PART B SPECIFIC WARNINGS AND INDICATIONS OF PRECAUTIONS TO BE TAKEN WHEN USING CERTAIN CATEGORIES OF TOYS

        1. 1.Toys not intended for use by children under 36 months...

        2. 2.Activity toys Activity toys must bear the following warning:‘Only for...

        3. 3.Functional toys Functional toys must bear the following warning:‘To be...

        4. 4.Chemical toys Without prejudice to the application of the provisions...

        5. 5.Skates, roller skates, online skates, skateboards, scooters and toy bicycles...

        6. 6.Aquatic toys Aquatic toys must bear the following warning:‘Only to...

        7. 7.Toys in food Toys contained in food or co-mingled with...

        8. 8.Imitations of protective masks and helmets Imitations of protective masks...

        9. 9.Toys intended to be strung across a cradle, cot or...

        10. 10.Packaging for fragrances in olfactory board games, cosmetic kits and...

    6. Expand +/Collapse -

      SCHEDULE 6

      CONFORMITY ASSESSMENT PROCEDURES (Annex II to Decision No 768/2008/EC)

      1. Expand +/Collapse -

        MODULE A Internal production control

        1. 1.Internal production control is the conformity assessment procedure whereby the...

        2. 2.Technical documentation

        3. 3.Manufacturing

        4. 4.1.UK marking and declaration of conformity

        5. 4.2.The manufacturer must draw up a written declaration of conformity...

        6. 5.Authorised representative

      2. Expand +/Collapse -

        MODULE B Type examination

        1. 1.Type examination is the part of a conformity assessment procedure...

        2. 2.Type examination may be carried out in either of the...

        3. 3.The manufacturer must lodge an application for Type examination with...

        4. 4.The approved body must: For the product:

        5. 4.1.examine the technical documentation and supporting evidence to assess the...

        6. 4.2.verify that the specimen(s) have been manufactured in conformity with...

        7. 4.3.carry out appropriate examinations and tests, or have them carried...

        8. 4.4.carry out appropriate examinations and tests, or have them carried...

        9. 4.5.agree with the manufacturer on a location where the examinations...

        10. 5.The approved body must draw up an evaluation report that...

        11. 6.Where the type meets the requirements of the specific legislative...

        12. 7.The approved body must keep itself apprised of any changes...

        13. 8.Each approved body must inform the Secretary of State concerning...

        14. 9.The manufacturer must keep a copy of the Type examination...

        15. 10.The manufacturer's authorised representative may lodge the application referred to...

      3. Expand +/Collapse -

        MODULE C Conformity to type based on internal production control

        1. 1.Conformity to type based on internal production control is the...

        2. 2.Manufacturing

        3. 3.1.Conformity marking and declaration of conformity

        4. 3.2.The manufacturer must draw up a written declaration of conformity...

        5. 4.Authorised representative

    7. Expand +/Collapse -

      SCHEDULE 7

      Approved body requirements

      1. 1.(1) A conformity assessment body must have legal personality and...

      2. 2.(1) A conformity assessment body must be a third-party body...

      3. 3.(1) A conformity assessment body, its top level management and...

      4. 4.A conformity assessment body, its top level management and the...

      5. 5.A conformity assessment body must not engage in any activity,...

      6. 6.Conformity assessment bodies must ensure that the activities of their...

      7. 7.Conformity assessment bodies and their personnel must carry out the...

      8. 8.Conformity assessment bodies must be capable of carrying out the...

      9. 9.At all times and for each conformity assessment procedure and...

      10. 10.A conformity assessment body must have the means necessary to...

      11. 11.The personnel responsible for carrying out the conformity assessment activities...

      12. 12.A conformity assessment body must be able to demonstrate the...

      13. 13.The renumeration of the top level management and personnel responsible...

      14. 14.A conformity assessment body must have, and must satisfy the...

      15. 15.A conformity assessment body must ensure that its personnel observe...

      16. 16.Paragraph 15 does not prevent the personnel from providing information...

      17. 17.A conformity assessment body must participate in, or ensure that...

  10. Explanatory Note

Back to top

Options/Help

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?