Print Options
PrintThe Whole
Instrument
PrintThe Whole
Part
PrintThe Whole
Chapter
PrintThis
Section
only
Changes over time for: Section 16
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Status:
There are multiple versions of this provision on screen. These apply to different geographical extents.
Status
The term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
Sometimes the text of a provision is changed, but the change(s) only apply to a particular geographical area. In some limited cases where this happens, the editorial team create a version for each different geographical area. Multiple versions are only created in this way where the change in question is a substitution so that there are different versions of the text for the different extents. Insertions and repeals of text do not give rise to such multiple versions.
Changes to legislation:
There are currently no known outstanding effects for the The Lifts Regulations 2016, Section 16.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Technical documentation and conformity assessmentE+W+S
16. Before placing a safety component for lifts on the market, a manufacturer must—
(a)have a relevant conformity assessment procedure carried out; and
(b)draw up the technical documentation referred to—
(i)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(a) or 48(b) is being carried out, in point 3 of Part A of Module B in [Schedule 11];
(ii)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(c) is being carried out, in point 3.1(d) of Module H in [Schedule 14].
Extent Information
Textual Amendments
Technical documentation and conformity assessmentN.I.
16. Before placing a safety component for lifts on the market, a manufacturer must—
(a)have a relevant conformity assessment procedure carried out; and
(b)draw up the technical documentation referred to—
(i)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(a) or 48(b) is being carried out, in point 3 of Part A of Module B in Annex IV to the Directive (as amended from time to time);
(ii)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(c) is being carried out, in point 3.1(d) of Module H in Annex VII to the Directive (as amended from time to time).
Back to top