[UK marking]E+W+S
This section has no associated Explanatory Memorandum
54.—[(1) The UK marking must be affixed visibly, legibly and indelibly—
(a)to the product; or
(b)where paragraph (1A) applies, to—
(i)a label affixed to the product; or
(ii)a document accompanying the product.]
[(1A) For a period of [seven years] beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the product; or
(b)a document accompanying the product.]
(2) Where [paragraph (1A) does not apply and] it is not possible or warranted, on account of the nature of a component to affix the [UK] marking in accordance with [paragraph (1)(a)], the [UK] marking must be affixed to—
(a)the packaging; and
(b)the accompanying documents.
(3) [Except where paragraph (3A) applies] where the product referred to in paragraph (1)—
(a)is a watercraft, the [UK] marking must be affixed to the watercraft builder’s plate and mounted separately from the watercraft identification number; or
(b)is a propulsion engine, the [UK] marking must be affixed on the engine.
[(3A) For a period of 24 months beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the watercraft or propulsion engine; or
(b)a document accompanying the watercraft or propulsion engine.]
(4) The [UK] marking must be followed by the identification number of the [approved] body where—
(a)that body is involved in the production control phase of the conformity assessment under Modules A (internal production control), A1 (internal production control plus supervised product testing) or C (conformity to type based on internal production control) set out in [Schedule 15]; or
(b)where a post construction assessment set out in Schedule 5 of these Regulations is being used.
(5) The identification number of the [approved] body must be affixed—
(a)by the [approved] body itself; or
(b)under the instructions of the [approved] body by the manufacturer.
Extent Information
Textual Amendments
Commencement Information
CE markingN.I.
54.—(1) The CE marking must be affixed visibly, legibly and indelibly to the product.
(2) Where it is not possible or warranted, on account of the nature of a component to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to—
(a)the packaging; and
(b)the accompanying documents.
(3) Where the product referred to in paragraph (1)—
(a)is a watercraft, the CE marking must be affixed to the watercraft builder’s plate and mounted separately from the watercraft identification number; or
(b)is a propulsion engine, the CE marking must be affixed on the engine.
(4) The CE marking must be followed by the identification number of the notified body where—
(a)that body is involved in the production control phase of the conformity assessment under Modules A (internal production control), A1 (internal production control plus supervised product testing) or C (conformity to type based on internal production control) set out in Annex II of Decision 768/2008; or
(b)where a post construction assessment set out in Schedule 5 of these Regulations is being used.
(5) The identification number of the notified body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the notified body by the manufacturer.
Extent Information
Commencement Information