2009 No. 214
The Smoke Control Areas (Exempt Fireplaces) (Scotland) Order 2009
Made
Laid before the Scottish Parliament
Coming into force
The Scottish Ministers make the following Order in exercise of the powers conferred by section 21 of the Clean Air Act 19931 and all other powers enabling them to do so.
In accordance with that section, they are satisfied that the classes of fireplace exempted by this Order can be used for burning fuel other than authorised fuels2 without producing any smoke or a substantial quantity of smoke.
Citation, commencement and extent1
1
This Order may be cited as the Smoke Control Areas (Exempt Fireplaces) (Scotland) Order 2009 and comes into force on 29th June 2009.
2
This Order extends to Scotland only.
Fireplaces exempted from section 20 of the Clean Air Act 19932
The fireplaces described in Schedule 1 which comply with the conditions specified in relation to each of them in that Schedule are exempt from the provisions of section 20 (prohibition on emission of smoke in smoke control area) of the Clean Air Act 1993.
Revocations3
The Orders specified in Schedule 2 are revoked.
SCHEDULE 1Exempted fireplaces
Fireplace | Conditions | |||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
The fireplace must be installed, maintained and operated in accordance with the following specifications | Fuels that must be used (other than authorised fuels) | |||||||||||||||||||||||||||||||||
| The fuel for which the mechanical stoker was designed. | |||||||||||||||||||||||||||||||||
| The fuel for which the mechanical stoker was designed. | |||||||||||||||||||||||||||||||||
| The fuel for which the mechanical stoker was designed. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 27th August 1982 and bearing the reference “SAF 250-3000/HW & /S.”. | Sawdust, or shavings, or mixtures of sawdust, shavings and off-cuts, being fuel containing (by weight) not more than 1 per cent of plastic material. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 2nd November 1992 and bearing the reference “Apollo 10-25-50”. | Wood, wood shavings, cardboard and polythene. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 30th April 1986 and which bear the reference “No. C06/0016”. The fireplace shall be operated as a single unit with–
| The waste derived fuel recommended in the manufacturer’s instructions. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 2002 and bearing the reference “001/B9ENERGYBIOMASS”. | Untreated wood chips; shredded wood; or small untreated pieces of wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 3rd March 2000 and bearing the reference “BBP236UK”. | Untreated dry hardwood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s and Wood Energy Limited’s instructions “Binder Equipment Installation, Commissioning and Maintenance” dated 17th May 2005, reference WELBinderManualrev0.doc, revision 0. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s and Wood Energy Limited’s instructions “Binder Equipment Installation, Commissioning and Maintenance” dated 17th May 2005, reference WELBinderManualrev0.doc, revision 0. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s and Wood Energy Limited’s instructions “Binder Equipment Installation, Commissioning and Maintenance” dated 17th May 2005, reference WELBinderManualrev0.doc, revision 0. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s and Wood Energy Limited’s instructions “Binder Equipment Installation, Commissioning and Maintenance” dated 17th May 2005, reference WELBinderManualrev0.doc, revision 0. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated April 2005, reference Bedienungsanleitung Englisch v2.0 doc. | Chipped wood, wood pellets or planed wood shavings. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated April 2005, reference Bedienungsanleitung Englisch v2.0 doc. | Chipped wood, wood pellets or planed wood shavings. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated January 2007, reference Broag-Gilles/0-145/1. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated January 2007, reference Broag-Gilles/150-300/1. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions, which bear the reference “FF/CBR FLEXIFUEL 150/200 1989”. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions, which bear the reference “FF/CBR FLEXIFUEL 1987”. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions, which bear the reference “CBR Turbo Heat 88”. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1st January 1993 and, in the case of the Clearview models 650 and 750, bearing the reference “1/42” and, in the case of the Vision 500 model, bearing the reference “V1/42”. | Firewood which has been split, stacked and air dried. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions “Operating Instructions Clearview Vision/Vision Inset/Pioneer & Solution” dated 1st July 2006, reference V1/42, stamped and signed “Smoke Control”. | Air-dried wood logs. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions: reference “001 August 1985”. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “January 1992. Serial No: UM 351B”. | Firewood that has been split, stacked and air-dried. | ||||||||||||||||||||||||||||||||
| Instruction Manual referenced “161 505 27 06/1” and dated 20/02/2007. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated November 1991 bearing the reference “200-8632”. | Firewood that has been split, stacked and air-dried. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 250 Issue 1”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated October 1995 bearing the following references:–
| Wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 5th August 1998, reference A/22160 as amended by those dated 4th December 2004, reference D13. | Untreated dry wood. Peat or peat briquettes with, in either case, less than 25 per cent moisture. Union Coal Briquettes, manufactured by Rheinbraun AG of Germany comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent of the total weight. CPL Wildfire, manufactured by Coal Products Limited, Immingham, which comprise bituminous coal with a volatile content of 32–36 per cent (as to approximately 96 per cent of the total weight) and a cold cure resin binder (as to the remaining weight); are manufactured from those constituents by a process involving roll-pressing; have an average weight of either 80–90 grammes or 160–170 grammes; and have a sulphur content not exceeding 1.8 per cent of the total weight. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 5th August 1998, reference A/22160 as amended by those dated 4th December 2004, reference D13. | Untreated dry wood. Peat or peat briquettes with, in either case, less than 25 per cent moisture. Union Coal Briquettes, manufactured by Rheinbraun AG of Germany comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent of the total weight. CPL Wildfire, manufactured by Coal Products Limited, Immingham, which comprise bituminous coal with a volatile content of 32–36 per cent (as to approximately 96 per cent of the total weight) and a cold cure resin binder (as to the remaining weight); are manufactured from those constituents by a process involving roll-pressing; have an average weight of either 80–90 grammes or 160–170 grammes; and have a sulphur content not exceeding 1.8 per cent of the total weight. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 4th October 2004, reference GHD/DUN4B/1. | Untreated dry wood. Peat or peat briquettes with, in either case, less than 25 per cent moisture. Union Coal Briquettes, manufactured by Rheinbraun AG of Germany and comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent of the total weight. CPL Wildfire, manufactured by Coal Products Limited, Immingham, which comprise bituminous coal with a volatile content of 32–36 per cent (as to approximately 96 per cent of the total weight) and a cold cure resin binder (as to the remaining weight); are manufactured from those constituents by a process involving roll-pressing; have an average weight of between 80–90 grammes or between 160–170 grammes; and have a sulphur content not exceeding 1.8 per cent of the total weight. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 4th December 2004, reference D13W. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 4th December 2004, reference D13W together with the manufacturer’s instructions dated 4th October 2004 reference GHD/DUN4B/1. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 21st June 1988 and which bear the reference “NORCIN/TECH/88”. | Fuel consisting of paper, cardboard cartons, scrap wood, foliage, combustible floor sweepings and other waste from domestic, commercial and industrial activities containing no more than 20 per cent of restaurant and cafeteria waste, and containing less than 5 per cent by weight of coated papers, plastic or rubber waste. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated 5th March 2007, reference 004275101 011. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated 2nd October 2006, reference 004275115 REV 005. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated 28th August 2006, reference 004275128 REV 002. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated 12th July 2006, reference 004275110 REV 011. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructionswhich–
| Cereal straw. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| Cereal straw. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which, in the case of models HT60, HT70 and HT80, are dated 1st July 1993 and bear the reference “HT60/70/80”, and, in the case of model BB154/2V, are dated 1st September 1993 and bear the reference “9/93”. | Cereal straw. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated June 2005, reference Bedienungsanleitung Firematic V 1.1 ENG doc. | Chipped wood, wood pellets or planed wood shavings. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated November 2004, reference B0340004. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s operating instructions dated November 2004, reference B0340004. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Wood waste in clean condition. | |||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles/0-145/1 and dated January 2007. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles/150-300/1 and dated January 2007. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles 360/1 and dated January 2008. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles/360/1 and dated January 2008. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles/360/1 and dated January 2008. | Wood pellets. | ||||||||||||||||||||||||||||||||
| Operating instructions referenced Gilles/360/1 and dated January 2008. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated March 1988 and which bear the reference “HAAT/I/CAA/3/88”. | Fuel consisting of paper, cardboard cartons, scrap wood, foliage, combustible floor sweepings and other waste from domestic, commercial and industrial activities containing no more than 20 per cent of restaurant and cafeteria waste, and containing less than 5 per cent by weight of coated papers, plastic or rubber waste. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “HAAT/2/CAA/10/89”. | The following fuels used in the mixtures by volume recommended in Appendix A of the manufacturer’s instructions:– paper, cardboard, corrugated paper, office or domestic waste, wood, polythene sheet or foam, polypropylene, nylon, polyethylene, rubber foam backed carpet, polystyrene, polyurethane and glass fibre reinforced plastics. | ||||||||||||||||||||||||||||||||
| Operating instruction reference “Operating Manual for Boilers CATfire 150-500 kW” effective from 1/1/2008. | Wood pellets of diameter 6 mm and, a maximum length of 30 mm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| The washed coals recommended in the manufacturer’s user instructions. | ||||||||||||||||||||||||||||||||
| Wood waste in clean condition. | |||||||||||||||||||||||||||||||||
| Washed coal singles of nominal size 12.5 mm to 28 mm as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| Installation and operation manualsreferenced 4 205/194/00 dated 01/06 and 4 205 193/00 dated 06/06. | Wood logs with less than 20 per cent moisture. | ||||||||||||||||||||||||||||||||
| The manufacturer’s technical information and installation instructions dated 10/05 reference 4 204 794/00 and operating instructions dated 01/06 reference 4 204 793/01. | Wood pellets. | ||||||||||||||||||||||||||||||||
| Installation and operation manuals referenced 4 204 794/01 and 4 204 793/02 dated 06/07. | 6 mm diameter wood pellets. | ||||||||||||||||||||||||||||||||
| Installation and operation manual referenced STUman/01 dated 11/07 or the installation and operation manual referenced STU/man/01/1 dated 06/08. | 6 mm diameter wood pellets. | ||||||||||||||||||||||||||||||||
| Installation and operation manual referenced STU/man/01/1 dated 06/08. | 6 mm diameter wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| The washed coals recommended in the manufacturer’s instructions bearing the reference II/02D/07-89 shall be used. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “II/02D/11-90 and UI/02D/11-90”. | Bituminous Coalflow pearls distributed by UK Coal plc. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 249 Issue 1”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 249 Issue 1”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 75 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operation instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operation instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operation instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operation instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operation instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated February 1999 and bearing the reference “I.D.E.I.”. | Paper, cardboard, untreated dry wood, foliage, floor sweepings and other waste containing no more than 20 per cent by weight of restaurant and cafeteria waste and less than 5 per cent by weight of coated paper, plastic or rubber waste. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “AMENDED No. 20917C U.K. MAY 1990”. | 40 cm firewood that has been split, stacked and air-dried. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “CSC-JDS-OI dated 21/10/91”. | Wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated November 1995 bearing the following references:–
| Wood. | ||||||||||||||||||||||||||||||||
| KWB Instruction Manual referenced BA TDS- 05.2008 and dated 14th May 2008 including specification of recommended fuels. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated August 2005, reference BA TDS-0805. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 30th June 2007, issue No 3. | Seasoned logs of less than 20 per cent moisture and of a maximum length of 350 mm. | ||||||||||||||||||||||||||||||||
| Operating instructions dated 19th December 2008 reference N00471AXX Rev 001 DP081219 | Dry and split wood logs of a maximum length of 25 cm and a maximum diameter of 10 cm. | ||||||||||||||||||||||||||||||||
| Løvenholm Multifuel stove Installation and Operation manual version 07/08. | Untreated wood with a moisture content below 20 per cent. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 31st October 2002 and bearing the reference “098234-01”. | Wood; wood products; forest residues; forest thinnings; melamine coated or uncoated MDF chipboard; plywood; or compound wood product. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1st January 2000, reference 72345600. | Untreated dry wood which has been split, stacked and air dried; or air dried wood briquettes. | ||||||||||||||||||||||||||||||||
| Installation and operation manual referenced 72146800 and dated 10.01.2008. | Wood logs with less than 20 per cent moisture. | ||||||||||||||||||||||||||||||||
| Installation and operation manual referenced 72311200 and dated 04.02.2008. | Wood logs with less than 20 per cent moisture. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1st January 2000 and bearing the reference “72345600”. |
| ||||||||||||||||||||||||||||||||
| Installation and operation manual referenced 72610400 and dated 04.09.2007. | Wood logs with less than 20 per cent moisture. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1116 Edition D. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions dated April 2007, reference IN1180 Edition C. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1116 Edition D. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions dated January 2007, reference IN1116 Edition D. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Euroheat Distributors (HBS) Limited’s operational instructions referenced IN1141 Ed B and dated November 2006. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference P.S.501 9.12.88. | Softwood shavings, hardwood shavings or sawdust shall be used. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PE/HB/001.E and with revision date 02/2007. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PBV 2000 CMP 1.4 (V2.31) and with revision date 03/2007. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PE/HB/001.E and with revision date 02/2007. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PBV 2000 CMP 1.4 (V2.31) and with revision date 03/2008. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PE/HB/001.E and with revision date 02/2007. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PBV 2000 CMP 1.4 (V2.31) and with revision date 03/2008. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PE/HB/001.E and with revision date 02/2007. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| Ökofen operation instructions referenced PBV 2000 CMP 1.4 (V2.31) and with revision date 03/2008. | Wood pellets of maximum diameter 6 mm and maximum length of 4 cm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 25th October 2004, references:
| Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The fireplaces shall be installed, maintained and operated in accordance with the manufacturer’s instructions dated 30th September 1997 and bearing the reference “CSC/OS/001”. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Washed coal singles of nominal size 12.5 mm to 28 mm as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| Selected washed coal doubles and trebles or Union Coal Briquettes, manufactured by Rheinbraun AG of Germany and comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent. | ||||||||||||||||||||||||||||||||
| Operating instructions dated November 2007 reference V2.2. | Wood pellets corresponding to ÖNORM M7135 of diameter 6 mm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 8th July 2003, reference 7006-186. | Dry cured untreated wood of maximum size 43.18 cm × 10.16 cm × 10.16 cm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 9th October 2003, reference 250-6931B. | Dry cured untreated wood of maximum size 38.1 cm × 10.16 cm × 5.08 cm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 4th June 2003, reference 7004-187. | Dry cured untreated wood of maximum size 38.1 cm × 10.16 cm × 5.08 cm. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated July 1994 bearing the following reference:–
| Chipboard, fibre board, melamine coated chipboard, wood offcuts, softwood or hardwood shavings or dust. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 30th March 1988 and which bear the reference “RHGBEA 30388”. | Hard and soft wood shavings. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 30th March 1988 bearing the reference “RHGBEA 30388”. | Hard and soft wood shavings. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| Selected washed coal doubles and trebles. | ||||||||||||||||||||||||||||||||
| Washed coal singles of nominal size 12.5 mm to 28 mm as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| Selected washed coal doubles and trebles. | |||||||||||||||||||||||||||||||||
| Washed coal singles of nominal size 12.5 mm to 28 mm as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| Washed coal singles of nominal size 12.5 mm to 28 mm as marked by UK Coal plc. | |||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 247 Issue 1” dated July 2008 and instruction manual “PM280 Issue 1” dated January 2009. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “AMENDED No. 200 – 0908 U.K. OCTOBER 1991”. | 40 cm firewood that has been split, stacked and air-dried. | ||||||||||||||||||||||||||||||||
| Clean wood waste of a size within the limits of the manufacturer’s specifications and containing not more than 5 per cent sander dust. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| Union Coal Briketts, manufactured by Rheinbraun AG of Germany and comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent. | ||||||||||||||||||||||||||||||||
| Instruction manual with title “Scan Andersen 4 5” and dated “15/11/07” and instructions for installation referenced “Edition 09/05 GB”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond 20 mm. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated May 1989. | Solid waste of the types specified in the manufacturer’s instructions dated May 1989 shall be used. | ||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “B200/DEC 83”. The fireplace shall not be used to burn chipboard or plastic coated chipboard unless an afterburner, supplied by the manufacturer of the fireplace and capable of producing 50 megajoules of heat per hour, has been fitted to the fireplace. | Hardwood or softwood offcuts; a mixture of offcuts (hardwood or softwood) and sawdust with no more than 50 per cent of the mixture being sawdust; chipboard offcuts; or plastic coated chipboard offcuts. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “B500/DEC 83”. | Hardwood or softwood offcuts. | ||||||||||||||||||||||||||||||||
| Clean wood waste containing not more than 5 per cent sander dust and not more than 1 per cent plastic contamination. | |||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 176- Issue 4”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 176- Issue 4”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM 176- Issue 4”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual references “PM227 ENG Issue 2” dated July 2008 and instruction manual “PM271 Issue 2” dated January 2009. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual reference “PM230 Issue 1” dated May 2008 and instruction manual “PM281 Issue 1” dated January 2009. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated January 1st 1983, and bearing the reference A10000. The afterburn cycle shall last not less than 25 minutes and shall come into operation each time the loading door is opened. | Wood off-cuts, woodwaste, pallets, chipboard, plastic covered chipboard (the plastic content of the covering being not more than 1 per cent by weight), cardboard or paper. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated August 1995 bearing the reference “Issue C1000/C/Range”. | Chipboard or wood shavings, forestry chips or paper briquettes. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated August 1997 and bearing the reference “Issue: CM897”. | Woodwaste, pallets, medium density fibreboard, melamine faced chipboard, cardboard, paper or untreated and airdried wood offcuts. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “T/A JANUARY 1990”. | Hardwood or softwood shavings or sawdust. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated October 1993 and bearing the reference “Issue: A1001”. | Hardwood or softwood shavings or sawdust. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1st January 1995 bearing the following references:–
|
| ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated February 1987 and which bear the reference “No P150-2-87”. When the fireplace is used to burn chipboard and plastic coated chipboard, an afterburner which is supplied with the fireplace and which must be capable of continuously producing 20 megajoules of heat per hour shall be used. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated February 1987 and which bear the reference “No P300-2-87”. When the fireplace is used to burn chipboard and plastic coated chipboard, an afterburner which is supplied with the fireplace and which must be capable of continuously producing 40 megajoules of heat per hour shall be used. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated December 1986 and which bear the reference “P600-12-86”. When the fireplace is used to burn chipboard and plastic coated chipboard, an afterburner which is supplied with the fireplace and which must be capable of continuously producing 75 megajoules of heat per hour shall be used. The fireplace shall not be used to burn sawdust in bulk. | Hard or soft wood offcuts, or chipboard or plastic coated chipboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference Jan. 89 T5-A-1-89. | Softwood shavings, hardwood shavings or chipboard dust shall be used. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “MAY 1991 Ref No: D257”. | Hardwood or softwood offcuts, chipboard, plastic coated chipboard or cardboard. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1998 and bearing the reference “TX/1998”. | Paper, card, untreated dry wood and cotton waste. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated May 1983 and which–
| Selected washed coal doubles or Union Coal Briquettes, manufactured by Rheinbraun of Germany and comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated September 1989 and which–
| The washed coals recommended in the manufacturer’s user instructions. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 24th July 1985 and which–
| The washed coals recommended in the manufacturer’s user instructions: reference “No. 45574”. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated July 1987 and which–
| The washed coals recommended in the manufacturer’s user instructions. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated November 1986 and which–
| The washed coals recommended in the manufacturer’s user instructions. | ||||||||||||||||||||||||||||||||
| Either washed coal pearls of nominal size 6 mm to 16 mm, or washed coal singles of nominal size 12.5 mm to 28 mm, as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| Either washed coal pearls of nominal size 6 mm to 16 mm, or washed coal singles of nominal size 12.5 mm to 28 mm, as marketed by UK Coal plc. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions bearing the reference “CBR “TURBO” HEAT 1000 TO 1200 1990”. | Hardwood or softwood offcuts, chipboard offcuts or plastic coated chipboard offcuts. | ||||||||||||||||||||||||||||||||
| Installation manual reference M 060 01 03 dated 11/2003. Operating manual 99229a dated August 2002. | Wood pellets of 6 mm diameter and a moisture content below 10%. | ||||||||||||||||||||||||||||||||
| Installation manual reference M 060 01 03 dated 11/2003. Operating manual 99229a dated August 2002. | Wood pellets of 6 mm diameter and a moisture content below 10%. | ||||||||||||||||||||||||||||||||
| Operating instructions dated 17th December 2008 reference Version 6.0.03. | Wood pellets of a maximum length of 30 mm and diameter of 6 mm and conforming to CEN/TS 14961:2005. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 28th July 2003, reference BA-USP 0703. | Wood pellets. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated August 2003, reference BA-USV 0803. | Wood pellets or wood chips. | ||||||||||||||||||||||||||||||||
| Installation and operating instructions referenced: WF15 – WF16 – WF20 dated 2007 along with supplementary instructions reference 01wfuk.2007 and dated 2007. A permanent stop must be in place on the secondary air inlet to prevent closure beyond 50 mm. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| Instruction manual referenced “0916197/00” and dated “05/2005”. | Wood pellets. | ||||||||||||||||||||||||||||||||
| Instruction manual referenced “092125/00” and dated “08/2007”. | Wood pellets. | ||||||||||||||||||||||||||||||||
| Clean wood waste of a size within the limits referred to in the manufacturer’s instructions. | |||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 8th September 1998 and bearing the reference “BPWS version 1”. | Untreated dry wood. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 16th February 2009, reference WT5_v2. | Medium density fibreboard, melamine faced chipboard, untreated wood offcuts, air-dried medium density fibreboards, air-dried melamine faced chipboard, untreated and air-dried wood offcuts. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 19th January 2005, reference WT10 and WT15. | Medium density fibreboard, melamine faced chipboard, untreated wood offcuts, air-dried medium density fibreboards, air-dried melamine faced chipboard, untreated and air-dried wood offcuts. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions which–
| Union Coal Briquettes, manufactured by Rheinbraun AG of Germany and comprising lignite compressed into briquettes of approximately 15 cm in length with square ends and with a sulphur content not exceeding 1 per cent. | ||||||||||||||||||||||||||||||||
| The manufacturer’s instructions dated 1st August 1985 and which–
| The washed coals recommended in the manufacturer’s user instructions: reference “No. ZKLIT 139”. | ||||||||||||||||||||||||||||||||
| Instruction manual referenced “100SE Issue 1” dated “03/09”. A permanent stop must be in place on the secondary air inlet to prevent closure beyond the 50 per cent open position. | Untreated dry wood with a maximum moisture content of 20 per cent maximum length of 200 mm and maximum width or diameter of 120 mm. |
SCHEDULE 2Revocations
Orders revoked | References |
---|---|
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1982 | S.I.1982/448 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1983 | S.I.1983/1573 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1984 | S.I.1984/1805 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1985 | S.I.1985/315 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1987 | S.I.1987/383 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1989 | S.I.1989/888 |
The Smoke Control Areas (Exempted Fireplaces) (No. 2) Order 1990 | S.I.1990/2457 |
The Smoke Control Areas (Exempted Fireplaces) Order 1991 | S.I.1991/2892 |
The Smoke Control Areas (Exempted Fireplaces) Order 1992 | S.I.1992/2811 |
The Smoke Control Areas (Exempted Fireplaces) Order 1993 | S.I.1993/2277 |
The Smoke Control Areas (Exempted Fireplaces) Order 1996 | S.I.1996/1108 |
The Smoke Control Areas (Exempted Fireplaces) Order 1997 | S.I.1997/3009 |
The Smoke Control Areas (Exempted Fireplaces) (Scotland) Order 1999 | |
The Smoke Control Areas (Exempt Fireplaces) (Scotland) Order 2001 | |
The Smoke Control Areas (Exempt Fireplaces) (Scotland) Order 2003 | |
The Smoke Control Areas (Exempt Fireplaces) (Scotland) (No. 2) Order 2008 |
(This note is not part of the Order)