1982 No. 444
The Filament Lamps for Vehicles (Safety) Regulations 1982
Made
Laid before Parliament in draft
Coming into Operation
Whereas the Secretary of State has, in accordance with the provisions of section 1(4) of the Consumer Safety Act 1978, consulted with such organisations as appear to him to be representative of interests substantially affected by these Regulations, the Health and Safety Commission and such other persons as he considers appropriate:
And whereas a draft of these Regulations has been approved by a resolution of each House of Parliament:
Now, therefore, the Secretary of State, in exercise of the powers conferred by section 1 of the said Act and now vested in him1, hereby makes the following Regulations:
1
1
These Regulations may be cited as the Filament Lamps for Vehicles (Safety) Regulations 1982.
2
These Regulations shall come into operation on the expiry of a period of six months beginning on the day on which these Regulations are made.
2
1
No person shall supply, offer to supply, agree to supply, expose for supply or possess for supply any filament lamp of a type to which an ECE Regulation or Community Instrument mentioned in an item in column 2 of the Table below applies unless it is marked with the marking designated as an 0approval mark by the provisions in the Motor Vehicles (Designation of Approval Marks) Regulations 19792 mentioned in relation to that item in column 3 of that Table.
1 | 2 | 3 |
---|---|---|
Item No. | ECE Regulation or Community Instrument | Provisions in the Motor Vehicles (Designation of Approval Marks) Regulations 1979 |
1 | ECE Regulation No. 2 | Regulation 4 and item 2 or 2A in Schedule 2. |
2 | ECE Regulation No. 8 | Regulation 4 and item 8 in Schedule 2. |
3 | ECE Regulation No. 20 | Regulation 4 and item 20 in Schedule 2. |
4 | ECE Regulation No. 37 | Regulation 4 and item 37 or 37A in Schedule 2. |
5 | Council Directive 76/761/EEC of 27th July 1976 | Regulation 5 and item 18 in Schedule 4. |
2
In this Regulation “ECE Regulation” has the meaning given in Regulation 3(1) of the Motor Vehicles (Designation of Approval Marks) Regulations 1979.
3
The prohibition specified in Regulation 2(1) above relates only to a filament lamp as an entity separate from, and not as part of, a lamp unit or a vehicle.