The Capacity Serving Measures (Intoxicating Liquor) Regulations 1988

1. Introductory Text

2. PART I GENERAL

   1. 1. Citation, commencement and revocation

   2. 2. Interpretation

   3. 3. Application

3. PART II MATERIALS AND PRINCIPLES OF CONSTRUCTION AND MARKING OF CAPACITY SERVING MEASURES

   1. 4. Every capacity serving measure shall be sufficiently strong, rigid and...

   2. 5. Every capacity serving measure shall — (a) neither affect, nor...

   3. 6. Every capacity serving measure shall be constructed so that no...

   4. 7. (1) Capacity serving measures may be either —

   5. 8. A capacity serving measure shall not rock, and its brim...

   6. 9. Every capacity serving measure shall remain reasonably perpendicular when rotated...

   7. 10. (1) Every capacity serving measure shall have its nominal capacity...

4. PART III TESTING

   1. 11. Every capacity serving measure submitted for testing shall be in...

   2. 12. A capacity serving measure shall be tested by delivering water...

   3. 13. The nominal capacity and every subdivision shall be tested.

   4. 14. The capacity to the line of a line measure shall...

   5. 15. The capacity to the brim of a brim measure shall...

   6. 16. Subject to Regulation 17 below, every capacity serving measure submitted...

   7. 17. (1) Where a group of capacity serving measures of the...

   8. 18. For the purposes of the performance by an inspector of...

5. PART IV SUPPLEMENTARY PROVISIONS

   1. 19. Prescribed limits of error

   2. 20. Passing as fit for use for trade

   3. 21. Stamping

   4. 22. Obliteration of stamps

6. Signature

7. 1. SCHEDULE

      1. Table 1 BRIM MEASURES

      2. Table 2 LINE MEASURES

8. Explanatory Note