- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
3.—(1) The requirements with which a silencer must comply for the purposes of section 1(1) of the Act are that the silencer must be—
(a)clearly and indelibly marked in accordance with paragraphs 3.1 to 3.1.3 of Annex II to the Directive, or
(b)clearly and indelibly marked “BS AU 193/T2”, “BS AU 193a: 1990/T2” or “BS AU 193a: 1990/T3” (being marks referred to in the British Standard Specifications indicating that certain requirements specified in those instruments are met).
(2) As respects a silencer, the requirements as to packaging, labelling and the provision of accompanying instructions which must be complied with for the purposes of section 1(1) of the Act are the requirements of Schedule 1 to these Regulations.
(3) For the purposes of this regulation Annex II to the Directive has effect as if at the beginning of paragraph 3.1.1 there were inserted the words “the name,”.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: