PART IIITESTING AND STAMPING

Passing as fit for use for trade10

1

An inspector shall not pass as fit for use for trade an automatic catchweighing instrument unless—

a

it complies with all the appropriate requirements of these Regulations; and

b

on testing, it falls within the prescribed limits of error in relation to passing as fit for use for trade.

2

An inspector shall not pass as fit for use for trade an automatic catchweighing instrument imported from F1an EEA State unless—

a

where the requisite documentation is presented in accordance with regulation 9, the test report recites and the test data confirm to the satisfaction of the inspector that, on testing in accordance with the provisions of clause 5.3 (initial verification) of Part 1 of OIML R51 or on an equivalent basis, that automatic catchweighing instrument fell within limits of error which afford in use an equivalent standard to the prescribed limits of error; and

b

it otherwise complies with all the relevant requirements of these Regulations.

3

For the purposes of these Regulations, the prescribed limits of error relating to an automatic catchweighing instrument shall be determined in accordance with the provisions of Schedule 5.