Search Legislation

The Measuring Instruments (Automatic Gravimetric Filling Instruments) Regulations 2006 (revoked)

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about opening options

Opening OptionsExpand opening options

Changes over time for: The Measuring Instruments (Automatic Gravimetric Filling Instruments) Regulations 2006 (revoked) (Schedules only)

 Help about opening options

Version Superseded: 28/12/2016

Status:

Point in time view as at 30/10/2006.

Changes to legislation:

The Measuring Instruments (Automatic Gravimetric Filling Instruments) Regulations 2006 (revoked) is up to date with all changes known to be in force on or before 03 November 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Regulations2(1), 14(1), and 17(2)

SCHEDULE 1U.K.ESSENTIAL REQUIREMENTS

1.  The essential requirements are the relevant requirements relating to automatic gravimetric filling instruments contained in Annex I and MI-006 set out in this Schedule.U.K.

DefinitionsU.K.

Allowable ErrorsU.K.

ReproducibilityU.K.

RepeatabilityU.K.

Discrimination and SensitivityU.K.

DurabilityU.K.

ReliabilityU.K.

SuitabilityU.K.

Protection against corruptionU.K.

Information to be borne by and to accompany the automatic gravimetric filling instrumentU.K.

Indication of resultU.K.

Further processing of data to conclude the trading transactionU.K.

Conformity evaluationU.K.

Rated Operating ConditionsU.K.

Accuracy classesU.K.

MPEU.K.

Performance Under Influence Factor and Electromagnetic DisturbanceU.K.

Regulations 2(1) and 8

SCHEDULE 2U.K.NOTIFIED BODIES

PART 1 U.K.NOTIFIED BODY CRITERIA

1.  The body, its director and staff involved in conformity assessment tasks shall not be the designer, manufacturer, supplier, installer or user of the automatic gravimetric filling instrument that they inspect, nor the authorised representative of any of them. In addition, they may not be directly involved in the design, manufacture, marketing or maintenance of the automatic gravimetric filling instrument, nor represent the parties engaged in these activities. The preceding criterion does not, however, preclude in any way the possibility of exchanges of technical information between the manufacturer and the body for the purposes of conformity assessment.U.K.

2.  The body, its director and staff involved in conformity assessment tasks shall be free from all pressures and inducements, in particular financial inducements, that might influence their judgement or the results of their conformity assessment, especially from persons or groups of persons with an interest in the results of the assessments.U.K.

3.  The conformity assessment shall be carried out with the highest degree of professional integrity and requisite competence in the field of metrology. Should the body sub-contract specific tasks, it shall first ensure that the sub-contractor meets the requirements of these Regulations, and in particular of this Schedule. The body shall keep the relevant documents assessing the sub-contractor's qualifications and the work carried out by him under these Regulations at the disposal of the Secretary of State.U.K.

4.  The body shall be capable of carrying out all the conformity assessment tasks for which it has been designated, whether those tasks are carried out by the body itself or on its behalf and under its responsibility. It shall have at its disposal the necessary staff and shall have access to the necessary facilities for carrying out in a proper manner the technical and administrative tasks entailed in conformity assessment.U.K.

5.  The body's staff shall have—U.K.

(a)sound technical and vocational training, covering all conformity assessment tasks for which the body was designated;

(b)satisfactory knowledge of the rules governing the tasks which it carries out, and adequate experience of such tasks; and

(c)the requisite ability to draw up the certificates, records and reports demonstrating that the tasks have been carried out.

6.  The impartiality of the body, its director and staff shall be guaranteed. The remuneration of the body shall not depend on the results of the tasks it carries out. The remuneration of the body's director and staff shall not depend on the number of tasks carried out or on the results of such tasks.U.K.

7.  The body shall satisfy the Secretary of State that it has adequate civil liability insurance.U.K.

8.  The body's director and staff shall be bound to observe professional secrecy with regard to all information obtained in the performance of their duties pursuant to these Regulations, except vis-à-vis the Secretary of State.U.K.

PART 2 U.K.FUNCTIONS

Assessment of applications for certificates or notificationsU.K.

Limitations on duties to exercise functionsU.K.

ContractorsU.K.

Form of certificates and notificationsU.K.

Conditions in certificates or notificationsU.K.

Withdrawal of certificates or notificationsU.K.

Procedure where a notified body is minded to refuse to give, or to vary or withdraw a certificate or notificationU.K.

Regulation 6(2)

SCHEDULE 3U.K.TECHNICAL DOCUMENTATION

1.  The technical documentation shall render the design, manufacture and operation of the automatic gravimetric filling instrument intelligible and shall permit an assessment of its conformity with the appropriate requirements of these Regulations.U.K.

2.  The technical documentation shall be sufficiently detailed to ensure—U.K.

(a)the definition of the metrological characteristics;

(b)the reproducibility of the metrological performances of produced automatic gravimetric filling instruments when properly adjusted using appropriate intended means; and

(c)the integrity of the automatic gravimetric filling instrument.

3.  The technical documentation shall include insofar as relevant for assessment and identification of the type and/or automatic gravimetric filling instrument—U.K.

(a)a general description of the instrument;

(b)conceptual design and manufacturing drawings and plans of components and circuits;

(c)manufacturing procedures to ensure consistent production;

(d)if applicable, a description of the electronic devices with drawings, diagrams, flow diagrams of the logic and general software information explaining their characteristics and operation;

(e)descriptions and explanations necessary for the understanding of sub-paragraphs (b), (c) and (d), including the operation of the instrument;

(f)a list of the relevant national standards and/or relevant normative documents, applied in full or in part;

(g)descriptions of the solutions adopted to meet the essential requirements where the relevant national standards and/or relevant normative documents have not been applied;

(h)results of design calculations and examinations;

(i)the appropriate test results, where necessary, to demonstrate that the type and/or instrument is compliant with the requirements of these Regulations under declared rated operating conditions and under specified environmental disturbances; and

(j)the EC-type examination certificates or EC design examination certificates in respect of instruments containing parts identical to those in the design.

4.  The manufacturer shall specify where seals and markings have been applied.U.K.

5.  The manufacturer shall indicate the conditions for compatibility with interfaces, where relevant.U.K.

Regulation 12(3)

SCHEDULE 4U.K.MARKING AND INSCRIPTIONS

1.  The CE marking consists of the symbol “CE” according to the design laid down in paragraph I.B(d) of the Annex to Decision 93/465/EEC . The CE marking shall be at least 5 mm high.U.K.

2.  The M marking consists of the capital letter “M” and the last two digits of the year of its affixing, surrounded by a rectangle. The height of the rectangle shall be equal to the height of the CE marking. The M marking shall immediately follow the CE marking.U.K.

3.  The identification number of the notified body concerned shall follow the CE marking and the M marking.U.K.

4.  When an automatic gravimetric filling instrument consists of a set of devices operating together, the markings shall be affixed on the instrument's main device.U.K.

5.  The CE marking and the M marking shall be indelible. The identification number of the notified body concerned shall be indelible or self-destructive upon removal. All markings shall be clearly visible or easily accessible.U.K.

Regulations 2(1) and 14(1)

SCHEDULE 5U.K.REQUIREMENTS FOR USE FOR TRADE

PART 1 U.K.ACCURACY CLASSES

Table 1

Accuracy classes for automatic gravimetric filling instruments for use for trade

Description of use of filling instrumentMaximum capacity of filling instrumentAccuracy class
(1)(2)(3)
For use for weighing potato crisps and similar products commonly known as “snack foods”Any capacityX2
For use for weighing solid fuel110 kg or lessX(1)
For use for weighing vegetable produce55 kg or lessX(1)
For weighing wasteAny capacityX(1)
For use for weighing materials not described in any of the above

Marginal Citations

PART 2 U.K.MAXIMUM PERMISSIBLE ERRORS

Maximum permissible error value for instruments in use for tradeU.K.

Regulation 34

SCHEDULE 6U.K.ADAPTATIONS FOR NORTHERN IRELAND

1.  In regulation 2(2), the reference to the Weights and Measures Act 1985 shall be construed as a reference to the Weights and Measures (Northern Ireland) Order 1981 .U.K.

2.  Part III does not apply to Northern Ireland.U.K.

3.  In regulation 18—U.K.

(a)for paragraph (1), substitute the following paragraph—

(1) The Department of Enterprise, Trade and Investment shall enforce these Regulations in Northern Ireland.; and

(b)for paragraph (3), substitute the following paragraph—

(3) No proceedings for an offence under these Regulations shall be instituted in Northern Ireland except by or on behalf of the Department of Enterprise, Trade and Investment or the Director of Public Prosecutions for Northern Ireland..

4.  In regulation 26—U.K.

(a)the reference in paragraph (3) to written information on oath shall be construed as a reference to a complaint on oath; and

(b)for paragraph (9), substitute the following paragraph—

(9) In this regulation, “credentials” in relation to an enforcement officer, means an authenticated document showing that he is authorised to act to exercise the powers conferred on him by this regulation..

5.  In regulation 32(3) the reference to sub-section (1) of section 14 of the Civil Evidence Act 1968 shall be construed as a reference to sub-section (1) of section 10 of the Civil Evidence Act (Northern Ireland) 1971 .U.K.

Back to top

Options/Help