Print Options
PrintThe Whole
Instrument
PrintThe Whole
Schedule
PrintThis
Part
only
Changes over time for: PART2
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Status:
Point in time view as at 29/03/2010.
Changes to legislation:
There are currently no known outstanding effects for the The Export Control Order 2008, PART2.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[PART 2U.K.EXPLOSIVE-RELATED GOODS AND TECHNOLOGY
PL8001 | Explosive-related “goods” and “technology”, as follows: |
| a. | Equipment and devices, other than those in Part I of this Schedule or in 1A004.d., 1A005, 1A006, 1A007, 1A008, 3A229, 3A232 or 5A001.h. in Annex I to “the dual-use Regulation”, for detection of or use with “explosives” or for dealing with or protecting against “improvised explosive devices”, as follows, and specially designed components therefor: |
| | 1. | Electronic equipment designed to detect “explosives” or “explosive signatures”; |
| | | N.B.: | See also 1A004.d. in Annex I to “the dual-use Regulation”. |
| | | Note: | PL8001.a.1. does not control equipment requiring operator judgment to establish the presence of “explosives” or “explosive signatures”. |
| | 2. | Electronic jamming equipment specially designed to prevent the detonation by radio remote control of “improvised explosive devices”; |
| | | N.B.: | See also 5A001.h. in Annex I to “the dual-use Regulation”. |
| | 3. | Equipment and devices specially designed to initiate explosions by electrical or non-electrical means, (eg, firing sets, detonators and igniters); |
| | | N.B.: | See also 1A007, 1A008, 3A229 and 3A232 in Annex I to “the dual-use Regulation”. |
| | | Note: | PL8001.a.3. does not control: |
| | | | a. | Equipment and devices specially designed for a specific commercial use consisting of the actuation or operation by explosive means of other equipment or devices the function of which is not the initiation or creation of explosions; |
| | | | b. | Pressure controlled equipment specially designed for down-hole oilfield equipment applications and which are incapable of use at atmospheric pressure; and |
| | | | c. | Detonating cord. |
| | 4. | Equipment and devices, including, but not limited to: shields and helmets, specially designed for the disposal of “improvised explosive devices”; |
| | | N.B.: | See also 1A005, 1A006 and 5A001.h. in Annex I to “the dual-use Regulation”. |
| | | Note: | PL8001.a.4. does not control bomb blankets, mechanical handling equipment for manoeuvring or exposing “improvised explosive devices”, containers designed for holding “improvised explosive devices” or objects suspected of being such devices or other equipment specially designed to temporarily protect against “improvised explosive devices” or objects suspected of being such devices. |
| b. | Linear cutting explosive charges other than those listed at entry 1A008 of Annex I to “the dual-use Regulation”; |
| c. | “Technology” “required” for the “use” of “goods” in this Part of this Schedule.” |
| | N.B. | See article 18 of this Order for exceptions from the controls on “technology”.”] |
Back to top