Search Legislation

The Toys (Safety) Regulations 2011

 Help about what version

What Version

 Help about advanced features

Advanced Features

 Help about opening options

Opening OptionsExpand opening options

Status:

Point in time view as at 31/12/2020.

Changes to legislation:

There are currently no known outstanding effects for the The Toys (Safety) Regulations 2011, PART 2. Help about Changes to Legislation

PART 2U.K.Prohibitions and Obligations on Economic Operators

Manufacturers and their authorised representativesU.K.

Prohibitions on placing toys on the marketE+W+S

10.—(1) A manufacturer must not place a toy on the market unless it will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) A manufacturer must not place a toy on the market without having complied with—

(a)regulation 11 (design and manufacture of toys in accordance with essential safety requirements);

(b)regulation 12 (safety assessment);

(c)regulation 13 (applicable conformity assessment procedures);

(d)regulations 15 (F1... declaration of conformity and [F2UK] marking);

(e)regulation 17(1) to (3) (drawing up of technical documentation);

(f)regulation 19 (information identifying toy and manufacturer);

(g)regulation 20 (instructions for use, safety information and warnings); and

(h)regulation 21 (compliance procedures for series production).

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Prohibitions on placing toys on the marketN.I.

10.—(1) A manufacturer must not place a toy on the market unless it will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) A manufacturer must not place a toy on the market without having complied with—

(a)regulation 11 (design and manufacture of toys in accordance with essential safety requirements);

(b)regulation 12 (safety assessment);

(c)regulation 13 (applicable conformity assessment procedures);

(d)regulations 15 ( EC declaration of conformity and CE marking);

(e)regulation 17(1) to (3) (drawing up of technical documentation);

(f)regulation 19 (information identifying toy and manufacturer);

(g)regulation 20 (instructions for use, safety information and warnings); and

(h)regulation 21 (compliance procedures for series production).

Design and manufacture of toys in accordance with essential safety requirementsU.K.

11.  The manufacturer must ensure that the toy has been designed and manufactured to comply with the essential safety requirements during its foreseeable and normal period of use.

Safety assessmentU.K.

12.  The manufacturer must carry out an analysis of the chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards that the toy may present, as well as an assessment of the potential exposure to such hazards.

Applicable conformity assessment proceduresE+W+S

13.—(1) The manufacturer must follow the applicable conformity assessment procedure to demonstrate that the toy will comply with the essential safety requirements during the toy's foreseeable and normal period of use.

(2) If the manufacturer has applied [F3designated] standards covering all the essential safety requirements, the manufacturer must use the internal production control procedure set out in Module A.

(3) In each of the following cases, the toy must be submitted to [F4Type] examination in accordance with the following provisions of these Regulations, together with the conformity to type procedure set out in Module C—

(a)where [F5designated] standards covering all the essential safety requirements for the toy do not exist;

(b)where the [F5designated] standards referred to in sub-paragraph (a) exist but the manufacturer has not applied them or has applied them only in part;

(c)where one or more of the [F5designated] standards referred to in sub-paragraph (a) has been published with a restriction;

(d)when the manufacturer considers that the nature, design, construction or purpose of the toy necessitates third party verification.

Extent Information

E2This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Applicable conformity assessment proceduresN.I.

13.—(1) The manufacturer must follow the applicable conformity assessment procedure to demonstrate that the toy will comply with the essential safety requirements during the toy's foreseeable and normal period of use.

(2) If the manufacturer has applied harmonised standards covering all the essential safety requirements, the manufacturer must use the internal production control procedure set out in Module A.

(3) In each of the following cases, the toy must be submitted to EC-type examination in accordance with the following provisions of these Regulations, together with the conformity to type procedure set out in Module C—

(a)where harmonised standards covering all the essential safety requirements for the toy do not exist;

(b)where the harmonised standards referred to in sub-paragraph (a) exist but the manufacturer has not applied them or has applied them only in part;

(c)where one or more of the harmonised standards referred to in sub-paragraph (a) has been published with a restriction;

(d)when the manufacturer considers that the nature, design, construction or purpose of the toy necessitates third party verification.

Application for [F6Type] examinationE+W+S

14.  An application for [F6Type] examination to be performed in relation to a toy must—

(a)be made to [F7an approved] body;

(b)be made in accordance with Module B;

(c)include a description of the toy;

(d)indicate the address at which the toy has been or will be manufactured; and

(e)F8... be accompanied by such fee as may be required by the body in accordance with regulation 50 (charging of fees [F9by approved] body).

Application for EC-type examinationN.I.

14.  An application for EC-type examination to be performed in relation to a toy must—

(a)be made to a notified body;

(b)be made in accordance with Module B;

(c)include a description of the toy;

(d)indicate the address at which the toy has been or will be manufactured; and

(e)if the application is made to a UK notified body, be accompanied by such fee as may be required by the body in accordance with regulation 50 (charging of fees by UK notified body).

[F10Declaration] of conformity and [F11UK] markingE+W+S

15.  Where it has been demonstrated by performance of the applicable conformity assessment procedure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use, the manufacturer must—

(a)draw up [F12a] declaration of conformity in accordance with regulation 16(1) to (4); and

(b)affix a [F13UK] marking in relation to the toy in accordance with regulation 18.

EC declaration of conformity and CE markingN.I.

15.  Where it has been demonstrated by performance of the applicable conformity assessment procedure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use, the manufacturer must—

(a)draw up an EC declaration of conformity in accordance with regulation 16(1) to (4); and

(b)affix a CE marking in relation to the toy in accordance with regulation 18.

[F14UK(NI) indicationN.I.

15A.(1) Where the CE marking is affixed on the basis of an assessment or a certificate issued by a UK notified body, a UK(NI) indication must be affixed in relation to the toy, in accordance with this regulation.

(2) The UK(NI) indication must be affixed—

(a)visibly, legibly and indelibly; and

(b)before a toy is placed on the market in Northern Ireland.

(3) The UK(NI) indication must be affixed wherever the CE marking is affixed, in accordance with regulation 18.

(4) The UK(NI) indication must be affixed by—

(a)the manufacturer; or

(b)the manufacturer's authorised representative who has been appointed by the manufacturer in accordance with regulation 25(1) to affix the UK(NI) indication on the manufacturer's behalf.

(5) When placing a toy on the market in Northern Ireland, an importer must ensure that the manufacturer has complied with their obligations under this regulation.

Register of UK notified bodiesN.I.

15B.(1) The Secretary of State must ensure that—

(a)each UK notified body is assigned an identification number; and

(b)there is a register of—

(i)UK notified bodies;

(ii)their notified body identification number;

(iii)the activities for which they have been notified;

(iv)any restrictions on those activities.

(2) The Secretary of State must ensure that the register referred to in paragraph (1) is maintained and made publicly available.

(3) The Secretary of State may authorise the United Kingdom Accreditation Service to compile and maintain the register in accordance with paragraph (1)(b).]

 E+W+S

16.—(1) The F15... declaration of conformity must state that it has been demonstrated that the essential safety requirements have been satisfied in relation to the toy.

(2) The F15... declaration of conformity must also—

(a)include the information, and follow the structure, set out in [F16Schedule 3]; and

(b)include any information required to be included by any Module which was followed in relation to the toy.

(3) The F15... declaration of conformity may contain further information.

(4) The manufacturer must keep up to date the F15... declaration of conformity drawn up in relation to a toy.

F17(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(6) By drawing up the F15... declaration of conformity, the manufacturer assumes responsibility for the compliance of the toy.

Extent Information

E5This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

 N.I.

16.—(1) The EC declaration of conformity must state that it has been demonstrated that the essential safety requirements have been satisfied in relation to the toy.

(2) The EC declaration of conformity must also—

(a)include the information, and follow the structure, set out in Annex III to the Directive; and

(b)include any information required to be included by any Module which was followed in relation to the toy.

(3) The EC declaration of conformity may contain further information.

(4) The manufacturer must keep up to date the EC declaration of conformity drawn up in relation to a toy.

(5) Where the EC declaration of conformity drawn up in relation to a toy which is made available on the market in the United Kingdom was drawn up in a language other than English, the manufacturer must translate the EC declaration of conformity into English.

(6) By drawing up the EC declaration of conformity, the manufacturer assumes responsibility for the compliance of the toy.

Technical documentation and correspondence relating to [F18Type] examinationE+W+S

17.—(1) The manufacturer must draw up technical documentation which contains all relevant information about the means used by the manufacturer to ensure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use.

[F19(2)  The technical documentation must be drawn up in English.]

(3) The technical documentation must include the information and documents listed in [F20Schedule 4] (technical documentation).

[F21(4)  Any correspondence relating to the Type examination of a toy must be drawn up in English.]

(5) The manufacturer must keep the technical documentation for a toy (including the F22... declaration of conformity) for a period of 10 years after the day on which the toy was placed on the market.

F23(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F23(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F23(8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F23(9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(10) If a manufacturer fails to comply with any of the manufacturer's obligations under paragraphs (1), (2) [F24or (3)], an enforcement authority may request the manufacturer to ensure that [F25an approved] body performs such tests as [F26the approved] body identifies, within such period as [F26the approved] body may specify, to verify that the toy will comply with the essential safety requirements during its foreseeable and normal period of use, and that the toy complies with any [F27designated] standard applicable to the toy.

(11) The manufacturer must comply with the request (at the manufacturer's own expense).

Extent Information

E6This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Technical documentation and correspondence relating to EC-type examinationN.I.

17.—(1) The manufacturer must draw up technical documentation which contains all relevant information about the means used by the manufacturer to ensure that a toy will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) The technical documentation must be drawn up—

(a)in so far as it relates to EC-type examination of the toy, in an official language of the [F48relevant] State in which the notified body which performed that examination is established or in a language acceptable to that body;

(b)in so far as it does not relate to such examination, in one of the official languages of the EU.

(3) The technical documentation must include the information and documents listed in Annex IV of the Directive (technical documentation).

(4) Any correspondence relating to the EC-type examination of a toy must be drawn up in the official language of the [F49relevant] State in which the notified body is established or in a language acceptable to that body.

(5) The manufacturer must keep the technical documentation for a toy (including the EC declaration of conformity) for a period of 10 years after the day on which the toy was placed on the market.

(6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(10) If a manufacturer fails to comply with any of the manufacturer's obligations under paragraphs (1), (2) [F50or (3)], an enforcement authority may request the manufacturer to ensure that a notified body performs such tests as the notified body identifies, within such period as the notified body may specify, to verify that the toy will comply with the essential safety requirements during its foreseeable and normal period of use, and that the toy complies with any harmonised standard applicable to the toy.

(11) The manufacturer must comply with the request (at the manufacturer's own expense).

Toys to bear [F28UK] markingE+W+S

18.—(1) The manufacturer must affix a [F28UK] marking in relation to a toy.

(2) The [F28UK] marking must be affixed visibly, legibly and indelibly.

(3) The [F28UK] marking must be affixed to—

(a)the toy;

(b)a label affixed to the toy; or

(c)the toy's packaging.

[F29(3A) For a period of 24 months beginning with IP completion day, the manufacturer may, in place of affixing the UK marking in accordance with paragraph (3) affix the UK marking to a document accompanying the toy.]

(4) Where the toy is small or consists of small parts, the manufacturer may, in place of affixing the [F28UK] marking in accordance with paragraph (3), affix the [F28UK] marking to—

(a)a label which is not affixed to the toy; or

(b)a leaflet which accompanies the toy.

(5) The manufacturer may (in place of affixing the [F28UK] marking in accordance with paragraphs (3) or (4)) affix the CE marking to a counter display where —

(a)the toy is sold in the counter display;

(b)it is not possible to affix the [F28UK] marking in accordance with paragraph (3) or (4); and

(c)the counter display was originally used as packaging for the toy.

(6) Where the toy is inside packaging the [F28UK] marking must—

(a)be affixed to the packaging (whether or not it is also affixed elsewhere); or

(b)be otherwise visible from outside the packaging.

(7) The [F28UK] marking may be followed by a pictogram or by any other mark indicating a special risk or use.

(8) Any toy which bears the [F28UK] marking shall be presumed to comply with all the provisions of these Regulations.

(9) The presumption set out in paragraph (8) is rebuttable.

Extent Information

E7This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F28Word in reg. 18 substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 15 para. 17(a) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 9(3))

Toys to bear CE markingN.I.

18.—(1) The manufacturer must affix a CE marking in relation to a toy.

(2) The CE marking must be affixed visibly, legibly and indelibly.

(3) The CE marking must be affixed to—

(a)the toy;

(b)a label affixed to the toy; or

(c)the toy's packaging.

(4) Where the toy is small or consists of small parts, the manufacturer may, in place of affixing the CE marking in accordance with paragraph (3), affix the CE marking to—

(a)a label which is not affixed to the toy; or

(b)a leaflet which accompanies the toy.

(5) The manufacturer may (in place of affixing the CE marking in accordance with paragraphs (3) or (4)) affix the CE marking to a counter display where —

(a)the toy is sold in the counter display;

(b)it is not possible to affix the CE marking in accordance with paragraph (3) or (4); and

(c)the counter display was originally used as packaging for the toy.

(6) Where the toy is inside packaging the CE marking must—

(a)be affixed to the packaging (whether or not it is also affixed elsewhere); or

(b)be otherwise visible from outside the packaging.

(7) The CE marking may be followed by a pictogram or by any other mark indicating a special risk or use.

(8) Any toy which bears the CE marking shall be presumed to comply with all the provisions of these Regulations.

(9) The presumption set out in paragraph (8) is rebuttable.

Information identifying toy and manufacturerU.K.

19.—(1) The manufacturer must ensure that the required information is marked—

(a)on the toy; or

(b)where the size or nature of the toy precludes the information from being marked on the toy—

(i)on the toy's packaging; or

(ii)in a document accompanying the toy.

(2) The required information is—

(a)a type, batch, serial or model number or other information enabling the toy to be identified;

(b)the manufacturer's name, registered trade name or registered trademark; and

(c)a single address at which the manufacturer can be contacted.

Instructions for use, safety information and warningsE+W+S

20.—(1) The manufacturer must ensure that a toy is accompanied by such instructions for use and safety information as is appropriate.

(2) In particular, the manufacturer must ensure that the following provisions of this regulation are complied with.

(3) Where it is appropriate in order to ensure the safe use of a toy, any information provided as to hazards and risks and avoiding them required by regulation 5(5) must include the specification of appropriate user limitations in accordance with Part A of [F30Schedule 5] (general warnings).

(4) Where a toy falls within a category listed in Part B of [F30Schedule 5], the toy must be accompanied by any warning and other information which is required to accompany that category of toy.

(5) But a toy must not be accompanied by a warning set out in Part B where that warning would conflict with the intended use of the toy, as determined by virtue of its function, dimension and characteristics.

(6) The wording of a warning which is required by any of points 2 to 10 of Part B to accompany a category of toy must be replicated without alteration.

(7) A warning, instructions or other information required to accompany a toy must be marked in English in a clearly visible, easily legible, understandable and accurate manner on—

(a)the toy;

(b)a label affixed to the toy; or

(c)the toy's packaging and, if appropriate, on any instructions for use which accompany the toy.

(8) Any warning or warnings accompanying a toy in accordance with this regulation must be preceded by the word “Warning” or “Warnings”.

(9) A warning which determines the decision to purchase a toy (such as a warning specifying the minimum or maximum age for users) must also be clearly visible to the consumer before the purchase (whether by appearing on the consumer packaging for the toy or elsewhere), including in cases where the purchase is made on-line.

F31(10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Extent Information

E8This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Instructions for use, safety information and warningsN.I.

20.—(1) The manufacturer must ensure that a toy is accompanied by such instructions for use and safety information as is appropriate.

(2) In particular, the manufacturer must ensure that the following provisions of this regulation are complied with.

(3) Where it is appropriate in order to ensure the safe use of a toy, any information provided as to hazards and risks and avoiding them required by regulation 5(5) must include the specification of appropriate user limitations in accordance with Part A of Annex V to the Directive (general warnings).

(4) Where a toy falls within a category listed in Part B of Annex V to the Directive, the toy must be accompanied by any warning and other information which is required to accompany that category of toy.

(5) But a toy must not be accompanied by a warning set out in Part B where that warning would conflict with the intended use of the toy, as determined by virtue of its function, dimension and characteristics.

(6) The wording of a warning which is required by any of points 2 to 10 of Part B to accompany a category of toy must be replicated without alteration.

(7) A warning, instructions or other information required to accompany a toy must be marked in English in a clearly visible, easily legible, understandable and accurate manner on—

(a)the toy;

(b)a label affixed to the toy; or

(c)the toy's packaging and, if appropriate, on any instructions for use which accompany the toy.

(8) Any warning or warnings accompanying a toy in accordance with this regulation must be preceded by the word “Warning” or “Warnings”.

(9) A warning which determines the decision to purchase a toy (such as a warning specifying the minimum or maximum age for users) must also be clearly visible to the consumer before the purchase (whether by appearing on the consumer packaging for the toy or elsewhere), including in cases where the purchase is made on-line.

(10) In this regulation a reference to Part A or Part B of Annex V to the Directive, or to any provision of either of those Parts, is a reference to that Part or to that provision as amended from time to time.

Compliance procedures for series productionE+W+S

21.—(1) A manufacturer of toys which are manufactured by means of series production must ensure that procedures are in place to ensure that any toy so manufactured will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) In doing so, the manufacturer must take into account—

(a)any change in the design or characteristics of the toy; and

(b)any change which has been made to any of the [F32designated] standards referred to in the F33... declaration of conformity drawn up in relation to the toy.

Extent Information

E9This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Compliance procedures for series productionN.I.

21.—(1) A manufacturer of toys which are manufactured by means of series production must ensure that procedures are in place to ensure that any toy so manufactured will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) In doing so, the manufacturer must take into account—

(a)any change in the design or characteristics of the toy; and

(b)any change which has been made to any of the harmonised standards referred to in the EC declaration of conformity drawn up in relation to the toy.

Submission of [F34Type] examination certificate for reviewE+W+S

22.  [F35A Type] examination certificate issued in relation to a toy must be submitted by the manufacturer to [F36an approved] body for review if—

(a)any change is made to—

(i)the manufacturing process for the toy;

(ii)any raw material used in the toy; or

(iii)any component of the toy;

(b)5 years have elapsed since the certificate was issued without it having being reviewed by [F36an approved] body;

(c)5 years have elapsed since the certificate was last reviewed by [F36an approved] body without it having being reviewed again by [F36an approved] body; or

(d)the manufacturer is of the view that a review of the certificate is necessary for any other reason.

Extent Information

E10This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Submission of EC-type examination certificate for reviewN.I.

22.  An EC-type examination certificate issued in relation to a toy must be submitted by the manufacturer to a notified body for review if—

(a)any change is made to—

(i)the manufacturing process for the toy;

(ii)any raw material used in the toy; or

(iii)any component of the toy;

(b)5 years have elapsed since the certificate was issued without it having being reviewed by a notified body;

(c)5 years have elapsed since the certificate was last reviewed by a notified body without it having being reviewed again by a notified body; or

(d)the manufacturer is of the view that a review of the certificate is necessary for any other reason.

Monitoring of toysU.K.

23.—(1) The manufacturer must take such of the following actions in relation to a toy as the manufacturer considers appropriate for the purpose of protecting the health and safety of consumers, taking into account any risk presented by the toy.

(2) The actions are—

(a)carrying out sample testing of marketed toys;

(b)investigating any complaint made in relation to the toy;

(c)keeping a register of—

(i)any such complaints;

(ii)any toy in relation to which any provision of these Regulations has not been complied with; and

(iii)any toy which has been recalled; and

(d)keeping distributors informed of any action taken by the manufacturer in accordance with sub-paragraph (a), (b) or (c).

Non-compliant toys and toys presenting a riskU.K.

24.—(1) Where a manufacturer has placed a toy on the market and has reason to believe that any provision of these Regulations has not in fact been complied with by the manufacturer in relation to the toy, the manufacturer must immediately—

(a)take the corrective measures which are necessary to ensure that the provision is complied with in relation to the toy, or withdraw or recall the toy, if appropriate; and

(b)where the toy presents a risk, provide the relevant enforcement authority with information about the following matters.

(2) The matters are—

(a)the risk presented by the toy;

(b)the non-compliance in question; and

(c)any corrective measures taken in accordance with paragraph (1)(a).

(3) An enforcement authority may request a manufacturer who has placed a toy on the market to cooperate with it in relation to any action taken or to be taken to eliminate any risk posed by the toy.

(4) The request must be accompanied by the reasons for making the request

(5) The manufacturer must comply with the request.

Manufacturer's authorised representativeE+W+S

25.—(1) A manufacturer may, by a written mandate, appoint a person established [F37in the United Kingdom] as the manufacturer's authorised representative to act on the manufacturer's behalf in relation to specified tasks in relation to a toy.

(2) The mandate must allow the authorised representative to do at least the following—

(a)perform the manufacturer's obligations under regulations 17(5) and (9) (duties to keep technical documentation and comply with a request by an enforcement authority for a copy F38... of technical documentation); and

(b)perform the manufacturer's obligations under regulation 24(5) (duty to comply with a request in relation to action taken to eliminate risks posed by a toy).

(3) An authorised representative may not be appointed to perform the manufacturer's obligations under regulation 11 (duty to design and manufacture toy in accordance with essential safety requirements) or regulation 17(1) (duty to draw up technical documentation).

(4) An authorised representative must perform each obligation under these Regulations that the representative is appointed by the mandate to perform.

(5) A manufacturer who has appointed an authorised representative to perform on the manufacturer's behalf an obligation under these Regulations remains responsible for the proper performance of that obligation.

Extent Information

E11This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Manufacturer's authorised representativeN.I.

25.—(1) A manufacturer may, by a written mandate, appoint a person established within the [F51relevant market] as the manufacturer's authorised representative to act on the manufacturer's behalf in relation to specified tasks in relation to a toy.

(2) The mandate must allow the authorised representative to do at least the following—

(a)perform the manufacturer's obligations under regulations 17(5) and (9) (duties to keep technical documentation and comply with a request by an enforcement authority for a copy or translation of technical documentation); and

(b)perform the manufacturer's obligations under regulation 24(5) (duty to comply with a request in relation to action taken to eliminate risks posed by a toy).

(3) An authorised representative may not be appointed to perform the manufacturer's obligations under regulation 11 (duty to design and manufacture toy in accordance with essential safety requirements) or regulation 17(1) (duty to draw up technical documentation).

(4) An authorised representative must perform each obligation under these Regulations that the representative is appointed by the mandate to perform.

(5) A manufacturer who has appointed an authorised representative to perform on the manufacturer's behalf an obligation under these Regulations remains responsible for the proper performance of that obligation.

ImportersU.K.

Prohibitions on placing toys on the marketE+W+S

26.—(1) An importer must not place a toy on the market unless it will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) An importer must not place a toy on the market unless—

(a)the importer has ensured that the manufacturer has done all of the following in relation to the toy—

(i)followed the applicable conformity assessment procedure in accordance with regulation 13;

(ii)drawn up the technical documentation in accordance with regulation 17;

(iii)affixed the [F39UK] marking in accordance with regulation 18;

(iv)complied with regulation 19 (information identifying toy and manufacturer);

(v)complied with regulation 20 (instructions for use, safety information and warnings); and

(b)the importer has complied with both of the following—

(i)regulation 27 (information identifying importer);

(ii)regulation 28 (storage or transport of toys).

Extent Information

E12This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Prohibitions on placing toys on the marketN.I.

26.—(1) An importer must not place a toy on the market unless it will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) An importer must not place a toy on the market unless—

(a)the importer has ensured that the manufacturer has done all of the following in relation to the toy—

(i)followed the applicable conformity assessment procedure in accordance with regulation 13;

(ii)drawn up the technical documentation in accordance with regulation 17;

(iii)affixed the CE marking in accordance with regulation 18;

(iv)complied with regulation 19 (information identifying toy and manufacturer);

(v)complied with regulation 20 (instructions for use, safety information and warnings); and

(b)the importer has complied with both of the following—

(i)regulation 27 (information identifying importer);

(ii)regulation 28 (storage or transport of toys).

Information identifying importerE+W+S

27.—(1) An importer must ensure that the following information is marked on the toy—

(a)the importer's name, registered trade name or registered trade mark; and

(b)the address at which the importer can be contacted.

[F40(2) Paragraph (1) does not apply where—

(a)either—

(i)the size or nature of the toy precludes the information from being marked on the toy;

(ii)the importer would have to open the toy's packaging in order to mark the information on the toy; or

(iii)the importer imported the toy from an EEA state or Switzerland and places it on the market within the period of 24 months beginning with IP completion day; and

(b)the importer ensures that the information referred to in paragraph (1) is set out on the toy's packaging or in a document accompanying the toy.]

Extent Information

E13This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Modifications etc. (not altering text)

Information identifying importerN.I.

27.—(1) An importer must ensure that the following information is marked on the toy—

(a)the importer's name, registered trade name or registered trade mark; and

(b)the address at which the importer can be contacted.

(2) The information may instead be marked on the toy's packaging or on a document accompanying the toy where—

(a)the size or nature of the toy precludes the information from being marked on the toy; or

(b)the importer would have to open the toy's packaging in order to mark the information on the toy.

Storage or transport of toysU.K.

28.  An importer must ensure that, while a toy is under the importer's responsibility, the conditions in which it is stored or transported will not jeopardise the toy's compliance with the essential safety requirements during its foreseeable and normal period of use.

Monitoring of toysU.K.

29.—(1) An importer must take such of the following actions in relation to a toy as the importer considers appropriate for the purpose of protecting the health and safety of consumers, taking into account any risk presented by the toy.

(2) The actions are—

(a)carrying out sample testing of marketed toys;

(b)investigating any complaint made in relation to the toy;

(c)keeping a register of—

(i)any such complaints;

(ii)any toy in relation to which any provision of these Regulations has not been complied with; and

(iii)any toy which has been recalled; and

(d)keeping distributors informed of any action taken by the importer in accordance with sub-paragraph (a), (b) or (c).

Non-compliant toys and toys presenting a riskU.K.

30.—(1) Paragraph (2) applies if an importer has reason to believe that a toy which the importer was intending to place on the market—

(a)will not comply with the essential safety requirements during its foreseeable and normal period of use; and

(b)presents a risk.

(2) The importer must inform the manufacturer and the relevant enforcement authority of the risk presented by the toy.

(3) An importer who has placed a toy on the market and has reason to believe that any provision of these Regulations has not been complied with in relation to the toy must immediately—

(a)take the corrective measures which are necessary to ensure that the provision is complied with in relation to the toy, or withdraw or recall the toy, if appropriate; and

(b)where the toy presents a risk, provide the relevant enforcement authority with information about the following matters.

(4) The matters are—

(a)the risk presented by the toy;

(b)the non-compliance in question; and

(c)any corrective measures taken in accordance with paragraph (1)(a).

(5) An enforcement authority may request an importer who has placed a toy on the market to cooperate with it in relation to any action taken or to be taken to eliminate any risk posed by the toy.

(6) The importer must comply with the request.

Duties to retain and provide informationU.K.

31.—(1) An importer must, for a period of 10 years after the day on which the toy is placed on the market—

(a)keep a copy of the [F41EC] declaration of conformity; and

(b)ensure that the technical documentation can be made available to an enforcement authority on request by the authority.

F42(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F42(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F42(4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duty in certain circumstances to comply with manufacturers' duties in place of importers' dutiesU.K.

32.—(1) This regulation applies where an importer—

(a)places a toy on the market under the importer's name or trademark; or

(b)modifies a toy already placed on the market in such a way that compliance with the essential safety requirements may be affected.

(2) The importer must comply with all of the duties imposed by these Regulations on a manufacturer and in such a case, a reference to the manufacturer in these Regulations is to be taken as being a reference to the importer.

(3) Such an importer is not required to comply with the duties imposed by these Regulations on importers.

DistributorsU.K.

Duty to act with due care and prohibitions on making toys available on the marketE+W+S

33.—(1) A distributor must act with due care in relation to the compliance of a toy which the distributor intends to make available on the market with the provisions of these Regulations.

(2) A distributor must not make a toy available on the market if the distributor has reason to believe that the toy will not comply with the essential safety requirements during its foreseeable and normal period of use.

(3) A distributor must not make a toy available on the market unless the distributor has—

(a)verified that the manufacturer has done all of the following things in relation to the toy—

(i)affixed the [F43UK] marking in accordance with regulation 18;

(ii)complied with regulation 19 (information identifying toy and manufacturer); and

(iii)complied with regulation 20 (instructions for use, safety information and warnings);

(b)verified that any importer has complied with regulation 27 (information identifying importer) in relation to the toy; and

(c)complied with regulation 34 (storage or transport of toys) in relation to the toy.

Extent Information

E14This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Duty to act with due care and prohibitions on making toys available on the marketN.I.

33.—(1) A distributor must act with due care in relation to the compliance of a toy which the distributor intends to make available on the market with the provisions of these Regulations.

(2) A distributor must not make a toy available on the market if the distributor has reason to believe that the toy will not comply with the essential safety requirements during its foreseeable and normal period of use.

(3) A distributor must not make a toy available on the market unless the distributor has—

(a)verified that the manufacturer has done all of the following things in relation to the toy—

(i)affixed the CE marking in accordance with regulation 18;

(ii)complied with regulation 19 (information identifying toy and manufacturer); and

(iii)complied with regulation 20 (instructions for use, safety information and warnings);

(b)verified that any importer has complied with regulation 27 (information identifying importer) in relation to the toy; and

(c)complied with regulation 34 (storage or transport of toys) in relation to the toy.

Storage or transport of toys under distributor's responsibilityU.K.

34.  A distributor must ensure that, while a toy is under the distributor's responsibility, the conditions in which it is stored or transported will not jeopardise the toy's compliance with the essential safety requirements during its foreseeable and normal period of use.

Non-compliant toys and toys presenting a riskU.K.

35.—(1) Paragraph (2) applies if a distributor has reason to believe that a toy which the distributor was intending to make available on the market—

(a)will not comply with the essential safety requirements during its foreseeable and normal period of use; and

(b)presents a risk.

(2) The distributor must inform the following of the risk presented by the toy—

(a)the importer (if there is one);

(b)the manufacturer (if there is no importer); and

(c)the relevant enforcement authority.

(3) A distributor who has made a toy available on the market and has reason to believe that any provision of these Regulations has not been complied with in relation to the toy must immediately—

(a)take the corrective measures which are necessary to ensure that the provision is complied with in relation to the toy, or withdraw or recall the toy, if appropriate; and

(b)where the toy presents a risk, provide the relevant enforcement authority with information about the following matters.

(4) The matters are—

(a)the risk presented by the toy;

(b)the non-compliance in question; and

(c)any corrective measures taken in relation to the toy in accordance with paragraph (3)(a).

(5) An enforcement authority may request a distributor who has made a toy available on the market to cooperate with it in relation to any action taken or to be taken to eliminate any risk posed by the toy.

(6) The request must be accompanied by the reasons for making the request.

(7) The distributor must comply with the request.

Duty to provide informationU.K.

F4436.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Duty in certain circumstances to comply with manufacturers' duties in place of distributors' dutiesU.K.

37.—(1) This regulation applies where a distributor—

(a)places a toy on the market under the distributor's name or trademark; or

(b)modifies a toy already placed on the market in such a way that compliance with the essential safety requirements may be affected.

(2) The distributor must comply with all of the duties imposed by these Regulations on a manufacturer, and in such a case, a reference to the manufacturer in these Regulations is to be taken as being a reference to the distributor.

(3) Such a distributor is not required to comply with the duties imposed by these Regulations on distributors.

All economic operatorsU.K.

Identification of economic operators to enforcement authoritiesU.K.

38.—(1) An enforcement authority may, before the end of the period specified in paragraph (3), request an economic operator to identify to the authority, within such period as the authority may specify—

(a)any other economic operator who has supplied it with a toy; and

(b)any other economic operator to whom it has supplied a toy.

(2) The economic operator must comply with the request.

(3) The period is—

(a)where the request is made to a manufacturer, 10 years after the day on which the toy was placed on the market;

(b)where the request is made to any other economic operator, 10 years after the day on which the economic operator was supplied with the toy.

Protection of [F45UK] markingE+W+S

39.—(1) A person must not affix a [F45UK] marking in relation to a toy unless—

(a)the person is—

(i)the manufacturer; or

(ii)an authorised representative of the manufacturer who has been appointed by the manufacturer F46... to affix the [F45UK] marking on the manufacturer's behalf; and

(b)it has been demonstrated by performance of the applicable conformity assessment procedure that the toy will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) A person must not affix any marking in relation to a toy which—

(a)is not a [F45UK] marking; but

(b)purports to attest that the toy satisfies the essential safety requirements.

(3) A person must not affix in relation to a toy any marking, sign or inscription which is likely to mislead any other person as to the meaning or form of the [F45UK] marking affixed in relation to the toy.

(4) Any other marking may be affixed in relation to a toy provided that the visibility, legibility and meaning of the [F45UK] marking is not thereby impaired.

Extent Information

E15This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Protection of CE markingN.I.

39.—(1) A person must not affix a CE marking in relation to a toy unless—

(a)the person is—

(i)the manufacturer; or

(ii)an authorised representative of the manufacturer who has been appointed by the manufacturer in accordance with regulation 25(1) to affix the CE marking on the manufacturer's behalf; and

(b)it has been demonstrated by performance of the applicable conformity assessment procedure that the toy will comply with the essential safety requirements during its foreseeable and normal period of use.

(2) A person must not affix any marking in relation to a toy which—

(a)is not a CE marking; but

(b)purports to attest that the toy satisfies the essential safety requirements.

[F52(2A) Paragraph (2) does not apply to the UK(NI) indication.]

(3) A person must not affix in relation to a toy any marking, sign or inscription which is likely to mislead any other person as to the meaning or form of the CE marking affixed in relation to the toy.

(4) Any other marking may be affixed in relation to a toy provided that the visibility, legibility and meaning of the CE marking is not thereby impaired.

[F47Obligations which are met by complying with obligations in the DirectiveE+W+S

39A.(1) In this regulation—

(a)any reference to an Article or an Annex is a reference to an Article of or an Annex to the Directive;

(b)CE marking” has the meaning given to it in Article 3(16);

(c)harmonised standard” has the meaning given to it in Article 3(8);

(2) Subject to paragraphs (6) and (7) paragraph (3) applies where, before placing a toy on the UK market, a manufacturer—

(a)ensures that the toy has been designed and manufactured in accordance with the requirements set out in—

(i)in Article 10 (essential safety requirements); and

(ii)Annex II (particular safety requirements);

(b)carries out the safety assessment in accordance with Article 18;

(c)ensures that the relevant conformity assessment procedure has been carried out in accordance with Article 19;

(d)in cases where the manufacturer considers that Article 19(3) applies, ensures that the provisions of Article 20 are complied with;

(e)draws up the technical documentation in accordance with Article 21(1);

(f)ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;

(g)affixes the CE marking in accordance with Articles 16 and 17;

(h)draws up an EC declaration of conformity, in accordance with Article 15; and

(i)ensures that the EC declaration of conformity is prepared in or translated into English.

(3) Where this paragraph applies—

(a)the requirements of regulations 10 to 15, 16(1) to (2), 17(1) to (4) and 18, are to be treated as being satisfied;

(b)regulations 16(4) to (5), 17(5) and (10), 21, 22, 39 and 44 are to be read subject to the modifications in paragraph (10);

(c)regulations 42 to 44 do not apply; and

(d)regulation 52 does not apply.

(4) Subject to paragraphs (6) and (7), paragraph (5) applies, where before placing a toy on the market, the importer ensures that—

(a)the relevant conformity assessment procedure that applies to that toy has been carried out in accordance with Article 19;

(b)the manufacturer has drawn up the technical documentation in accordance with Article 21(1); and

(c)the toy bears the CE marking affixed in accordance with Articles 16 and 17.

(5) Where this paragraph applies—

(a)the requirements in regulation 26(a)(i) to (iii) are to be treated as being satisfied; and

(b)regulations 26(1), 28 and 30 to 32 are to be read subject to the modifications in paragraph (10).

(6) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard.

(7) Where paragraph (6) applies paragraphs (2)(c) and (4)(a) are to be treated as requiring the manufacturer to carry out the conformity assessment procedure referred to in Article 19(3).

(8) Paragraph (9) applies where before making a toy available on the market, a distributor ensures that the manufacturer has affixed the CE marking in accordance with Articles 16 and 17.

(9) Where this paragraph applies—

(a)regulation 33(3)(a)(i) is to be treated as being satisfied;

(b)regulation 33(2), 34, 35 and 37 are to be read subject to the modifications in paragraph (10).

(10) The modifications referred to in paragraphs (3)(b), (5)(b) and (9)(b) are that—

(a)any reference to “declaration of conformity” is to be read as a reference to the EC declaration of conformity;

(b)any reference to “UK marking” is to be read as a reference to the CE marking;

(c)any reference to “essential safety requirements” is to be read as a reference to the requirements set out in—

(i)in Article 10 (essential safety requirements); and

(ii)Annex II (particular safety requirements);

(d)any reference to “designated standard” is to be read as a reference to a harmonised standard;

(e)any reference to “applicable conformity assessment procedure” is to be read as a reference to the applicable conformity assessment procedures referred to in Article 19;

(f)any reference to “technical documentation” is a reference to the technical documentation referred to in Article 21(1);

(g)any reference to “authorised representative” is a reference to a person appointed in accordance with Article 5; and

(h)any reference to “Type examination” is a reference to “EC-type examination”.

Expiry of regulation 39AE+W+S

39AA.(1) Subject to paragraph (2), regulation 39A ceases to have effect at the end of the period of 12 months beginning with IP completion day.

(2) Notwithstanding the expiry of regulation 39A—

(a)any toy which was placed on the market pursuant to regulation 39A may continue to be made available on the market on or after the expiry of regulation 39A;

(b)any obligation to which a person was subject under regulation 39A in respect of a toy placed on the market pursuant to regulation 39A continues to have effect after the expiry of regulation 39A, in respect of that toy.

Qualifying Northern Ireland GoodsE+W+S

39AB.(1) Where paragraph (2) applies—

(a)a toy is to be treated as being in conformity with the essential safety requirements; and

(b)each relevant economic operator is to be treated as having complied or as complying with the obligations imposed on them under Part 2.

(2) This paragraph applies where—

(a)a toy is—

(i)in conformity with the essential safety requirements, within the meaning of regulation 3 as it applies in Northern Ireland; and

(ii)qualifying Northern Ireland goods;

(b)each relevant economic operator has complied or is complying with the obligations imposed on them under Part 2, as that Part applies in Northern Ireland; and

(c)an importer has complied with the obligations set out in paragraph (3).

(3) The obligations referred to in paragraph (2)(c) are that, before placing the toy on the market, the importer—

(a)complies with regulation 27;

(b)ensures that—

(i)the applicable conformity assessment procedure has been carried out;

(ii)the manufacturer has drawn up the technical documentation; and

(iii)the toy bears the CE marking.

(4) In this regulation—

applicable conformity assessment procedure” means the conformity assessment procedure applicable to the toy under regulation 15, as it applies in Northern Ireland;

CE marking” has the meaning given to it in regulation 3, as it applies in Northern Ireland;

qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018;

technical documentation” means the technical documentation that a manufacturer has to draw up in accordance with regulation 17, as it applies in Northern Ireland.]

Back to top

Options/Help

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?