[UK] markingE+W+S
50.—[(1) The UK marking must be affixed visibly, legibly, and indelibly—
(a)to the lift carrier;
(b)to the safety component for lifts; or
(c)where paragraph (1A) applies, to—
(i)a label affixed to the lift carrier or the safety component; or
(ii)to a document accompanying the lift or the safety component.]
[(1A) For a period of 24 months beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the lift carrier or the safety component; or
(b)to a document accompanying the lift or the safety component.]
(2) Where [ paragraph (1A) does not apply and] it is not possible, on account of the nature of a safety component for lifts, to affix the [UK] marking in accordance with paragraph (1), the [UK] marking must be affixed to a label inseparably attached to the safety component for lifts.
(3) The [UK] marking [ in respect of a ] lift must be followed by the identification number of the [approved] body involved in any of the following conformity assessment procedures—
(a)the final inspection referred to in [Schedule 12];
(b)unit verification referred to in [ Schedule 15];
(c)quality assurance referred to in [Schedules 17, 18 or 19].
(4) The [UK] marking [in respect of a safety] component for lifts must be followed by the identification number of the [approved] body involved in any of the following conformity assessment procedures—
(a)product quality assurance referred to in [Schedule 13];
(b)full quality assurance referred to in [Schedule 14];
(c)conformity to type with random checking for safety components for lifts referred to in [Schedule 16 ].
(5) The identification number of the [approved] body must be affixed—
(a)by the [approved] body itself; or
(b)under the instructions of the [approved] body, by the installer or the installer's authorised representative or by the manufacturer or the manufacturer's authorised representative.
Extent Information
Textual Amendments
CE markingN.I.
50.—(1) The CE marking must be affixed visibly, legibly and indelibly to the lift carrier or the safety component for lifts.
(2) Where it is not possible, on account of the nature of a safety component for lifts, to affix the CE marking in accordance with paragraph (1), the CE marking must be affixed to a label inseparably attached to the safety component for lifts.
(3) The CE marking on a lift must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)the final inspection referred to in Annex V to the Directive (as amended from time to time);
(b)unit verification referred to in Annex VIII to the Directive (as amended from time to time);
(c)quality assurance referred to in Annexes X, XI or XII to the Directive (as amended from time to time).
(4) The CE marking on a safety component for lifts must be followed by the identification number of the notified body involved in any of the following conformity assessment procedures—
(a)product quality assurance referred to in Annex VI to the Directive (as amended from time to time);
(b)full quality assurance referred to in Annex VII to the Directive (as amended from time to time);
(c)conformity to type with random checking for safety components for lifts referred to in Annex IX to the Directive (as amended from time to time).
(5) The identification number of the notified body must be affixed—
(a)by the notified body itself; or
(b)under the instructions of the notified body, by the installer or the installer's authorised representative or by the manufacturer or the manufacturer's authorised representative.