http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31The Lifts Regulations 2016texttext/xmlenStatute Law DatabaseCONSUMER PROTECTIONHEALTH AND SAFETY2024-11-19Expert Participation2020-12-31 These Regulations transpose Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of member States relating to lifts and safety components for lifts (recast) (OJ L 96, 29.3.2014, p.251) (“the Directive”). SCHEDULE 11<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">TYPE EXAMINATION FOR LIFTS AND SAFETY COMPONENTS FOR LIFTS (Annex IV to the Directive)</Addition> Regulations 47 and 48MODULE B<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">A. Type examination of safety components for lifts</Addition>1Type examination is the part of a conformity assessment procedure in which an approved body examines the technical design of a safety component for lifts and verifies and attests that the technical design of the safety component for lifts satisfies the applicable essential health and safety requirements of Schedule 1 and will enable a lift in which it is correctly incorporated to satisfy those requirements.2The application for Type examination shall be lodged by the manufacturer, or his authorised representative, with a single approved body of his choice.The application shall include:athe name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well and the place of manufacture of the safety components for lifts;ba written declaration that the same application has not been lodged with any other approved body;cthe technical documentation;da representative specimen of the safety component for lifts or details of the place where it can be examined. The approved body may request further specimens if needed for carrying out the test programme;ethe supporting evidence for the adequacy of the technical design solution. This supporting evidence shall mention any documents, including other relevant technical specifications, that have been used, in particular where the relevant designated standards have not been applied in full. The supporting evidence shall include, where necessary, the results of tests carried out in accordance with other relevant technical specifications by the appropriate laboratory of the manufacturer, or by another testing laboratory on his behalf and under his responsibility.3The technical documentation shall make it possible to assess whether the safety component for lifts meets the conditions referred to in point 1 and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the safety component for lifts.The technical documentation shall contain, where applicable, the following:aa description of the safety component for lifts, including its area of use (in particular possible limits on speed, load and power) and conditions (in particular explosive environments and exposure to the elements);bdesign and manufacturing drawings and diagrams;cexplanations necessary for the understanding of those drawings and diagrams and the operation of the safety component for lifts;da list of the designated standards applied in full or in part and, where those designated standards have not been applied, descriptions of the solutions adopted to enable the safety component for lifts to meet the conditions referred to in point 1, including a list of other relevant technical specifications applied. In the event of partly applied designated standards, the technical documentation shall specify the parts which have been applied;eresults of design calculations performed by or for the manufacturer;ftest reports;ga copy of the instructions for the safety components for lifts;hsteps taken at the manufacturing stage to ensure that series-produced safety components for lifts conform to the safety component for lifts examined.4The approved body shall:aexamine the technical documentation and the supporting evidence to assess the adequacy of the technical design of the safety component for lifts;bagree with the applicant on a location where the examinations and tests will be carried out;cverify that the representative specimen(s) has(have) been manufactured in conformity with the technical documentation, and identify the elements which have been designed in accordance with the applicable provisions of the relevant designated standards, as well as the elements which have been designed in accordance with other relevant technical specifications;dcarry out appropriate examinations and tests, or have them carried out, to check whether, where the manufacturer has chosen to apply the specifications of the relevant designated standards, these have been applied correctly;ecarry out appropriate examinations and tests, or have them carried out, to check whether, where the specifications of the relevant designated standards have not been applied, the solutions adopted by the manufacturer applying other relevant technical specifications enable the safety component for lifts to meet the conditions referred to in point 1.The approved body shall draw up an evaluation report that records the examinations, verifications and tests carried out and their outcome. Without prejudice to its obligations vis-à-vis the Secretary of State, the approved body shall release the content of that report, in full or in part, only with the agreement of the manufacturer.5Where the type of the safety component for lifts meets the conditions referred to in point 1, the body shall issue a type examination certificate to the manufacturer. That certificate shall contain the name and address of the manufacturer the conclusions of the Type examination, any conditions of validity of the certificate and the particulars necessary to identify the approved type.The Type examination certificate may have one or more annexes attached.The Type examination certificate and its annexes shall contain all relevant information to allow the conformity of manufactured safety components for lifts with the examined type to be evaluated and to allow for in-service control.Where the type of the safety component for lifts does not satisfy the conditions referred to in point 1, the approved body shall refuse to issue a type examination certificate and shall inform the applicant accordingly, giving detailed reasons for its refusal.The approved body shall keep a copy of the Type examination certificate, its annexes and additions, as well as the technical documentation and the evaluation report, for 15 years from the date of issue of that certificate.6The approved body shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer meet the conditions referred to in point 1 and shall determine whether such changes require further investigation. If so, the approved body shall inform the manufacturer accordingly.7The manufacturer shall inform the approved body that holds the technical documentation relating to the Type examination certificate of any modification to the approved type that may affect the conformity of the safety component for lifts with the conditions referred to in point 1 or the conditions of validity of the Type examination certificate.The approved body shall examine the modification and inform the applicant whether the Type examination certificate remains valid or whether further examinations, verifications or tests are needed. As appropriate, the approved body shall issue an addition to the original Type examination certificate or ask for a new application for a type examination to be submitted.8Each approved body shall inform the Secretary of State concerning the Type examination certificates and any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to the Secretary of State the list of such certificates and any additions thereto refused, suspended or otherwise restricted.Each approved body shall inform the other approved bodies concerning the Type examination certificates and any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued.9The other approved bodies may, on request, obtain a copy of the Type examination certificates and additions thereto.10The manufacturer shall keep with the technical documentation a copy of the Type examination certificates, its annexes and additions at the disposal of the enforcing authorities for 10 years after the safety component for lifts has been placed on the market.11Authorised representativeThe manufacturer's authorised representative may lodge the application referred to in point 2 and fulfil the obligations set out in points 7 and 10, provided that they are specified in the mandate.<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">B. Type examination of lifts</Addition>1Type examination of lifts is the part of a conformity assessment procedure in which an approved body examines the technical design of a model lift, or a lift for which there is no provision for an extension or variant, and verifies and attests that the technical design of the model lift or the lift meets the applicable essential health and safety requirements set out in Schedule 1.Type examination of a lift includes an examination of a representative specimen of a complete lift.2The application for Type examination shall be lodged by the installer or his authorised representative with a single approved body of his choice.The application shall include:athe name and address of the installer; and, if the application is lodged by the authorised representative, his name and address as well;ba written declaration that the same application has not been lodged with any other approved body;cthe technical documentation;ddetails of the place where the specimen lift can be examined. The specimen lift submitted for examination shall include the terminal parts and be capable of serving at least three levels (top, middle and bottom);ethe supporting evidence for the adequacy of the technical design solution. This supporting evidence shall mention any documents, including other relevant technical specifications that have been used, in particular where the relevant designated standards have not been applied in full. The supporting evidence shall include, where necessary, the results of tests carried out in accordance with other relevant technical specifications by the appropriate laboratory of the installer, or by another testing laboratory on his behalf and under his responsibility.3The technical documentation shall make it possible to assess the conformity of the lift with the applicable essential health and safety requirements set out in Schedule 1.The technical documentation shall contain, where applicable, the following:aa description of the model lift indicating clearly all the permitted variations of the model lift;bdesign and manufacturing drawings and diagrams;cexplanations necessary for the understanding of those drawings and diagrams and of the operation of the lift;da list of the essential health and safety requirements taken into consideration;ea list of the designated standards applied in full or in part and, where those designated standards have not been applied, descriptions of the solutions adopted to meet the essential health and safety requirements of these Regulations, including a list of other relevant technical specifications applied. In the event of partly applied designated standards, the technical documentation shall specify the parts which have been applied;fa copy of the declarations of conformity of the safety components for lifts incorporated in the lift;gresults of design calculations performed by or for the installer;htest reports;ia copy of the instructions referred to in point 7.2 of Schedule 1;jsteps taken at the installation stage to ensure that the series-produced lift conforms to the essential health and safety requirements set out in Schedule 1.4The approved body shall:aexamine the technical documentation and supporting evidence to assess the adequacy of the technical design of the model lift or of the lift for which there is no provision for an extension or variant;bagree with the installer on a location where the examinations and tests will be carried out;cexamine the specimen lift to check that it has been manufactured in accordance with the technical documentation, and identify the elements which have been designed in accordance with the applicable provisions of the relevant designated standards, as well as the elements which have been designed in accordance with other relevant technical specifications;dcarry out appropriate examinations and tests, or have them carried out, to check whether, where the installer has chosen to apply the specifications of the relevant designated standards, these have been applied correctly;ecarry out appropriate examinations and tests, or have them carried out, to check whether, where the specifications of the relevant designated standards have not been applied, the solutions adopted by the installer applying other relevant technical specifications meet the corresponding essential health and safety requirements of these Regulations.5The approved body shall draw up an evaluation report that records the examinations, verifications and tests carried out and their outcome. Without prejudice to its obligations vis-à-vis the Secretary of State, the approved body shall release the content of that report, in full or in part, only with the agreement of the installer.6Where the type meets the essential health and safety requirements set out in Schedule 1 applicable to the lift concerned, the approved body shall issue a Type examination certificate to the installer. That certificate shall contain the name and address of the installer, the conclusions of the Type examination, any conditions of validity of the certificate and the particulars necessary to identify the approved type.The Type examination certificate may have one or more annexes attached.The Type examination certificate and its annexes shall contain all the information necessary to enable the conformity of lifts with the approved type to be assessed during the final inspection.Where the type does not comply with the essential health and safety requirements set out in Schedule 1, the approved body shall refuse to issue a Type examination certificate and shall inform the installer accordingly, giving detailed reasons for its refusal.The approved body shall keep a copy of the Type examination certificate, its annexes and additions, as well as the technical documentation and the evaluation report for 15 years from the date of issue of that certificate.7The approved body shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer comply with the essential health and safety requirements set out in Schedule 1, and shall determine whether such changes require further investigation. If so, the approved body shall inform the installer accordingly.8The installer shall inform the approved body of any modifications to the approved type, including variations not specified in the original technical documentation, that may affect the conformity of the lift with the essential health and safety requirements set out in Schedule 1 or the conditions of validity of the Type examination certificate.The approved body shall examine the modification and inform the installer whether the Type examination certificate remains valid or whether further examinations, verifications or tests are needed. As appropriate the approved body shall issue an addition to the original Type examination certificate or ask for a new application for a Type examination to be submitted.9Each approved body shall inform the Secretary of State concerning the Type examination certificates and any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to the Secretary of State the list of such certificates and any additions thereto refused, suspended or otherwise restricted.Each approved body shall inform the other approved bodies concerning the Type examination certificates and any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and additions thereto which it has issued.10The other approved bodies may, on request, obtain a copy of the Type examination certificates and additions thereto.11The installer shall keep with the technical documentation a copy of the Type examination certificate, including its annexes and additions, at the disposal of the enforcing authorities for 10 years after the lift has been placed on the market.12Authorised representativeThe installer's authorised representative may lodge the application referred to in point 2 and fulfil the obligations set out in points 8 and 11, provided that they are specified in the mandate.Schs. 11-19 inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 44 (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<Legislation xmlns="http://www.legislation.gov.uk/namespaces/legislation" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093" NumberOfProvisions="372" RestrictEndDate="2021-12-09" xsi:schemaLocation="http://www.legislation.gov.uk/namespaces/legislation http://www.legislation.gov.uk/schema/legislation.xsd" SchemaVersion="1.0" RestrictStartDate="2020-12-31" RestrictExtent="E+W+S+N.I.">
<ukm:Metadata xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:dct="http://purl.org/dc/terms/" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:ukm="http://www.legislation.gov.uk/namespaces/metadata">
<dc:identifier>http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31</dc:identifier>
<dc:title>The Lifts Regulations 2016</dc:title>
<dc:type>text</dc:type>
<dc:format>text/xml</dc:format>
<dc:language>en</dc:language>
<dc:publisher>Statute Law Database</dc:publisher>
<dc:subject scheme="SIheading">CONSUMER PROTECTION</dc:subject>
<dc:subject scheme="SIheading">HEALTH AND SAFETY</dc:subject>
<dc:modified>2024-11-19</dc:modified>
<dc:contributor>Expert Participation</dc:contributor>
<dct:valid>2020-12-31</dct:valid>
<dc:description>These Regulations transpose Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of member States relating to lifts and safety components for lifts (recast) (OJ L 96, 29.3.2014, p.251) (“the Directive”).</dc:description>
<atom:link rel="self" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.xml" type="application/xml"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/resources" href="http://www.legislation.gov.uk/uksi/2016/1093/resources" title="More Resources"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/impacts" href="http://www.legislation.gov.uk/uksi/2016/1093/impacts" title="Impact Assessments"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/act" href="http://www.legislation.gov.uk/uksi/2016/1093/2020-12-31" title="whole act"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/introduction" href="http://www.legislation.gov.uk/uksi/2016/1093/introduction/2020-12-31" title="introduction"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/signature" href="http://www.legislation.gov.uk/uksi/2016/1093/signature/2020-12-31" title="signature"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/note" href="http://www.legislation.gov.uk/uksi/2016/1093/note/2020-12-31" title="note"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/body" href="http://www.legislation.gov.uk/uksi/2016/1093/body/2020-12-31" title="body"/>
<atom:link rel="http://www.legislation.gov.uk/def/navigation/schedules" href="http://www.legislation.gov.uk/uksi/2016/1093/schedules/2020-12-31" title="schedules"/>
<atom:link rel="alternate" type="application/rdf+xml" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.rdf" title="RDF/XML"/>
<atom:link rel="alternate" type="application/akn+xml" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.akn" title="AKN"/>
<atom:link rel="alternate" type="application/xhtml+xml" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.xht" title="HTML snippet"/>
<atom:link rel="alternate" type="text/html" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.htm" title="Website (XHTML) Default View"/>
<atom:link rel="alternate" type="text/csv" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.csv" title="CSV"/>
<atom:link rel="alternate" type="application/pdf" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.pdf" title="PDF"/>
<atom:link rel="alternate" type="application/akn+xhtml" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31/data.html" title="HTML5 snippet"/>
<atom:link rel="http://purl.org/dc/terms/tableOfContents" hreflang="en" href="http://www.legislation.gov.uk/uksi/2016/1093/contents/2020-12-31" title="Table of Contents"/>
<atom:link rel="http://purl.org/dc/terms/hasVersion" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11" title="current"/>
<atom:link rel="up" href="http://www.legislation.gov.uk/uksi/2016/1093/2020-12-31" title="Entire legislation"/>
<atom:link rel="prev" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/10/2020-12-31" title="Schedule; Schedule 10"/>
<atom:link rel="prevInForce" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/10/2020-12-31" title="Schedule; Schedule 10"/>
<atom:link rel="next" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/12/2020-12-31" title="Schedule; Schedule 12"/>
<atom:link rel="nextInForce" href="http://www.legislation.gov.uk/uksi/2016/1093/schedule/12/2020-12-31" title="Schedule; Schedule 12"/>
<ukm:SecondaryMetadata>
<ukm:DocumentClassification>
<ukm:DocumentCategory Value="secondary"/>
<ukm:DocumentMainType Value="UnitedKingdomStatutoryInstrument"/>
<ukm:DocumentStatus Value="revised"/>
<ukm:DocumentMinorType Value="regulation"/>
</ukm:DocumentClassification>
<ukm:Year Value="2016"/>
<ukm:Number Value="1093"/>
<ukm:Made Date="2016-11-15"/>
<ukm:Laid Date="2016-11-16" Class="UnitedKingdomParliament"/>
<ukm:ComingIntoForce>
<ukm:DateTime Date="2016-12-08"/>
</ukm:ComingIntoForce>
<ukm:ISBN Value="9780111151396"/>
</ukm:SecondaryMetadata>
<ukm:TranspositionNotes>
<ukm:TranspositionNote URI="http://www.legislation.gov.uk/uksi/2016/1093/pdfs/uksitn_20161093_en.pdf" Date="2016-11-16" Title="Transposition Note" Size="117240"/>
</ukm:TranspositionNotes>
<ukm:OtherDocuments>
<ukm:OtherDocument URI="http://www.legislation.gov.uk/uksi/2016/1093/pdfs/uksiod_20161093_en.pdf" Date="2016-11-16" Title="Document provides supplementary evidence to accompany the Impact Assessment." Size="221601"/>
</ukm:OtherDocuments>
<ukm:Alternatives>
<ukm:Alternative URI="http://www.legislation.gov.uk/uksi/2016/1093/pdfs/uksi_20161093_en.pdf" Date="2016-11-16" Size="291836"/>
</ukm:Alternatives>
<ukm:ImpactAssessments>
<ukm:ImpactAssessment URI="http://www.legislation.gov.uk/ukia/2016/219/pdfs/ukia_20160219_en.pdf" Date="2016-11-16" Title="The Lifts Regulations 2016" Stage="Final" Department="Department for Business, Innovation and Skills" Year="2016" Number="219" Size="38229"/>
</ukm:ImpactAssessments>
<ukm:Statistics>
<ukm:TotalParagraphs Value="311"/>
<ukm:BodyParagraphs Value="90"/>
<ukm:ScheduleParagraphs Value="221"/>
<ukm:AttachmentParagraphs Value="0"/>
<ukm:TotalImages Value="0"/>
</ukm:Statistics>
</ukm:Metadata>
<Secondary>
<Schedules RestrictEndDate="2024-04-07" RestrictStartDate="2020-12-31" RestrictExtent="E+W+S+N.I.">
<Schedule DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11" NumberOfProvisions="23" RestrictStartDate="2020-12-31" RestrictExtent="E+W+S" id="schedule-11">
<Number>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">SCHEDULE 11</Addition>
</Number>
<TitleBlock>
<Title>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">TYPE EXAMINATION FOR LIFTS AND SAFETY COMPONENTS FOR LIFTS (Annex IV to the Directive)</Addition>
</Title>
</TitleBlock>
<Reference>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S"> Regulations 47 and 48</Addition>
</Reference>
<ScheduleBody>
<Part DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/part/1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/part/1" NumberOfProvisions="23" RestrictStartDate="2020-12-31" id="schedule-11-part-1">
<Number>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">MODULE B</Addition>
</Number>
<P1group RestrictStartDate="2020-12-31">
<Title>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">A. Type examination of safety components for lifts</Addition>
</Title>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/1n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/1n1" id="schedule-11-paragraph-1n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">1</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Type examination is the part of a conformity assessment procedure in which an approved body examines the technical design of a safety component for lifts and verifies and attests that the technical design of the safety component for lifts satisfies the applicable essential health and safety requirements of Schedule 1 and will enable a lift in which it is correctly incorporated to satisfy those requirements.</Addition>
</Text>
</P1para>
</P1>
</P1group>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-2n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">2</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The application for Type examination shall be lodged by the manufacturer, or his authorised representative, with a single approved body of his choice.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The application shall include:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1/a" id="schedule-11-paragraph-2n1-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the name and address of the manufacturer and, if the application is lodged by the authorised representative, his name and address as well and the place of manufacture of the safety components for lifts;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1/b" id="schedule-11-paragraph-2n1-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a written declaration that the same application has not been lodged with any other approved body;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1/c" id="schedule-11-paragraph-2n1-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the technical documentation;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1/d" id="schedule-11-paragraph-2n1-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a representative specimen of the safety component for lifts or details of the place where it can be examined. The approved body may request further specimens if needed for carrying out the test programme;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n1/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n1/e" id="schedule-11-paragraph-2n1-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the supporting evidence for the adequacy of the technical design solution. This supporting evidence shall mention any documents, including other relevant technical specifications, that have been used, in particular where the relevant designated standards have not been applied in full. The supporting evidence shall include, where necessary, the results of tests carried out in accordance with other relevant technical specifications by the appropriate laboratory of the manufacturer, or by another testing laboratory on his behalf and under his responsibility.</Addition>
</Text>
</P3para>
</P3>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-3n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">3</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The technical documentation shall make it possible to assess whether the safety component for lifts meets the conditions referred to in point 1 and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the safety component for lifts.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The technical documentation shall contain, where applicable, the following:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/a" id="schedule-11-paragraph-3n1-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a description of the safety component for lifts, including its area of use (in particular possible limits on speed, load and power) and conditions (in particular explosive environments and exposure to the elements);</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/b" id="schedule-11-paragraph-3n1-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">design and manufacturing drawings and diagrams;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/c" id="schedule-11-paragraph-3n1-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">explanations necessary for the understanding of those drawings and diagrams and the operation of the safety component for lifts;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/d" id="schedule-11-paragraph-3n1-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a list of the designated standards applied in full or in part and, where those designated standards have not been applied, descriptions of the solutions adopted to enable the safety component for lifts to meet the conditions referred to in point 1, including a list of other relevant technical specifications applied. In the event of partly applied designated standards, the technical documentation shall specify the parts which have been applied;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/e" id="schedule-11-paragraph-3n1-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">results of design calculations performed by or for the manufacturer;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/f/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/f" id="schedule-11-paragraph-3n1-f">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">f</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">test reports;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/g/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/g" id="schedule-11-paragraph-3n1-g">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">g</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a copy of the instructions for the safety components for lifts;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n1/h/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n1/h" id="schedule-11-paragraph-3n1-h">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">h</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">steps taken at the manufacturing stage to ensure that series-produced safety components for lifts conform to the safety component for lifts examined.</Addition>
</Text>
</P3para>
</P3>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-4n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">4</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1/a" id="schedule-11-paragraph-4n1-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">examine the technical documentation and the supporting evidence to assess the adequacy of the technical design of the safety component for lifts;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1/b" id="schedule-11-paragraph-4n1-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">agree with the applicant on a location where the examinations and tests will be carried out;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1/c" id="schedule-11-paragraph-4n1-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">verify that the representative specimen(s) has(have) been manufactured in conformity with the technical documentation, and identify the elements which have been designed in accordance with the applicable provisions of the relevant designated standards, as well as the elements which have been designed in accordance with other relevant technical specifications;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1/d" id="schedule-11-paragraph-4n1-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">carry out appropriate examinations and tests, or have them carried out, to check whether, where the manufacturer has chosen to apply the specifications of the relevant designated standards, these have been applied correctly;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n1/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n1/e" id="schedule-11-paragraph-4n1-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">carry out appropriate examinations and tests, or have them carried out, to check whether, where the specifications of the relevant designated standards have not been applied, the solutions adopted by the manufacturer applying other relevant technical specifications enable the safety component for lifts to meet the conditions referred to in point 1.</Addition>
</Text>
</P3para>
</P3>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall draw up an evaluation report that records the examinations, verifications and tests carried out and their outcome. Without prejudice to its obligations vis-à-vis the Secretary of State, the approved body shall release the content of that report, in full or in part, only with the agreement of the manufacturer.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/5n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/5n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-5n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">5</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Where the type of the safety component for lifts meets the conditions referred to in point 1, the body shall issue a type examination certificate to the manufacturer. That certificate shall contain the name and address of the manufacturer the conclusions of the Type examination, any conditions of validity of the certificate and the particulars necessary to identify the approved type.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The Type examination certificate may have one or more annexes attached.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The Type examination certificate and its annexes shall contain all relevant information to allow the conformity of manufactured safety components for lifts with the examined type to be evaluated and to allow for in-service control.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Where the type of the safety component for lifts does not satisfy the conditions referred to in point 1, the approved body shall refuse to issue a type examination certificate and shall inform the applicant accordingly, giving detailed reasons for its refusal.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall keep a copy of the Type examination certificate, its annexes and additions, as well as the technical documentation and the evaluation report, for 15 years from the date of issue of that certificate.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/6n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/6n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-6n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">6</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer meet the conditions referred to in point 1 and shall determine whether such changes require further investigation. If so, the approved body shall inform the manufacturer accordingly.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/7n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/7n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-7n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">7</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The manufacturer shall inform the approved body that holds the technical documentation relating to the Type examination certificate of any modification to the approved type that may affect the conformity of the safety component for lifts with the conditions referred to in point 1 or the conditions of validity of the Type examination certificate.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall examine the modification and inform the applicant whether the Type examination certificate remains valid or whether further examinations, verifications or tests are needed. As appropriate, the approved body shall issue an addition to the original Type examination certificate or ask for a new application for a type examination to be submitted.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/8n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/8n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-8n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">8</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Each approved body shall inform the Secretary of State concerning the Type examination certificates and any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to the Secretary of State the list of such certificates and any additions thereto refused, suspended or otherwise restricted.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Each approved body shall inform the other approved bodies concerning the Type examination certificates and any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and/or additions thereto which it has issued.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/9n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/9n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-9n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">9</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The other approved bodies may, on request, obtain a copy of the Type examination certificates and additions thereto.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/10n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/10n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-10n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">10</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The manufacturer shall keep with the technical documentation a copy of the Type examination certificates, its annexes and additions at the disposal of the enforcing authorities for 10 years after the safety component for lifts has been placed on the market.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/11n1/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/11n1" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-11n1">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">11</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Authorised representative</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The manufacturer's authorised representative may lodge the application referred to in point 2 and fulfil the obligations set out in points 7 and 10, provided that they are specified in the mandate.</Addition>
</Text>
</P1para>
</P1>
<P1group RestrictStartDate="2020-12-31">
<Title>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">B. Type examination of lifts</Addition>
</Title>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/1n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/1n2" id="schedule-11-paragraph-1n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">1</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Type examination of lifts is the part of a conformity assessment procedure in which an approved body examines the technical design of a model lift, or a lift for which there is no provision for an extension or variant, and verifies and attests that the technical design of the model lift or the lift meets the applicable essential health and safety requirements set out in Schedule 1.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Type examination of a lift includes an examination of a representative specimen of a complete lift.</Addition>
</Text>
</P1para>
</P1>
</P1group>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-2n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">2</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The application for Type examination shall be lodged by the installer or his authorised representative with a single approved body of his choice.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The application shall include:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2/a" id="schedule-11-paragraph-2n2-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the name and address of the installer; and, if the application is lodged by the authorised representative, his name and address as well;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2/b" id="schedule-11-paragraph-2n2-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a written declaration that the same application has not been lodged with any other approved body;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2/c" id="schedule-11-paragraph-2n2-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the technical documentation;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2/d" id="schedule-11-paragraph-2n2-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">details of the place where the specimen lift can be examined. The specimen lift submitted for examination shall include the terminal parts and be capable of serving at least three levels (top, middle and bottom);</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/2n2/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/2n2/e" id="schedule-11-paragraph-2n2-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">the supporting evidence for the adequacy of the technical design solution. This supporting evidence shall mention any documents, including other relevant technical specifications that have been used, in particular where the relevant designated standards have not been applied in full. The supporting evidence shall include, where necessary, the results of tests carried out in accordance with other relevant technical specifications by the appropriate laboratory of the installer, or by another testing laboratory on his behalf and under his responsibility.</Addition>
</Text>
</P3para>
</P3>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-3n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">3</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The technical documentation shall make it possible to assess the conformity of the lift with the applicable essential health and safety requirements set out in Schedule 1.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The technical documentation shall contain, where applicable, the following:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/a" id="schedule-11-paragraph-3n2-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a description of the model lift indicating clearly all the permitted variations of the model lift;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/b" id="schedule-11-paragraph-3n2-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">design and manufacturing drawings and diagrams;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/c" id="schedule-11-paragraph-3n2-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">explanations necessary for the understanding of those drawings and diagrams and of the operation of the lift;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/d" id="schedule-11-paragraph-3n2-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a list of the essential health and safety requirements taken into consideration;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/e" id="schedule-11-paragraph-3n2-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a list of the designated standards applied in full or in part and, where those designated standards have not been applied, descriptions of the solutions adopted to meet the essential health and safety requirements of these Regulations, including a list of other relevant technical specifications applied. In the event of partly applied designated standards, the technical documentation shall specify the parts which have been applied;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/f/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/f" id="schedule-11-paragraph-3n2-f">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">f</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a copy of the declarations of conformity of the safety components for lifts incorporated in the lift;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/g/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/g" id="schedule-11-paragraph-3n2-g">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">g</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">results of design calculations performed by or for the installer;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/h/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/h" id="schedule-11-paragraph-3n2-h">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">h</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">test reports;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/i/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/i" id="schedule-11-paragraph-3n2-i">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">i</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a copy of the instructions referred to in point 7.2 of Schedule 1;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/3n2/j/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/3n2/j" id="schedule-11-paragraph-3n2-j">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">j</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">steps taken at the installation stage to ensure that the series-produced lift conforms to the essential health and safety requirements set out in Schedule 1.</Addition>
</Text>
</P3para>
</P3>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-4n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">4</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall:</Addition>
</Text>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/a/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2/a" id="schedule-11-paragraph-4n2-a">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">a</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">examine the technical documentation and supporting evidence to assess the adequacy of the technical design of the model lift or of the lift for which there is no provision for an extension or variant;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/b/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2/b" id="schedule-11-paragraph-4n2-b">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">b</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">agree with the installer on a location where the examinations and tests will be carried out;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/c/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2/c" id="schedule-11-paragraph-4n2-c">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">c</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">examine the specimen lift to check that it has been manufactured in accordance with the technical documentation, and identify the elements which have been designed in accordance with the applicable provisions of the relevant designated standards, as well as the elements which have been designed in accordance with other relevant technical specifications;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/d/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2/d" id="schedule-11-paragraph-4n2-d">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">d</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">carry out appropriate examinations and tests, or have them carried out, to check whether, where the installer has chosen to apply the specifications of the relevant designated standards, these have been applied correctly;</Addition>
</Text>
</P3para>
</P3>
<P3 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/4n2/e/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/4n2/e" id="schedule-11-paragraph-4n2-e">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">e</Addition>
</Pnumber>
<P3para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">carry out appropriate examinations and tests, or have them carried out, to check whether, where the specifications of the relevant designated standards have not been applied, the solutions adopted by the installer applying other relevant technical specifications meet the corresponding essential health and safety requirements of these Regulations.</Addition>
</Text>
</P3para>
</P3>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/5n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/5n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-5n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">5</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall draw up an evaluation report that records the examinations, verifications and tests carried out and their outcome. Without prejudice to its obligations vis-à-vis the Secretary of State, the approved body shall release the content of that report, in full or in part, only with the agreement of the installer.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/6n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/6n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-6n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">6</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Where the type meets the essential health and safety requirements set out in Schedule 1 applicable to the lift concerned, the approved body shall issue a Type examination certificate to the installer. That certificate shall contain the name and address of the installer, the conclusions of the Type examination, any conditions of validity of the certificate and the particulars necessary to identify the approved type.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The Type examination certificate may have one or more annexes attached.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The Type examination certificate and its annexes shall contain all the information necessary to enable the conformity of lifts with the approved type to be assessed during the final inspection.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Where the type does not comply with the essential health and safety requirements set out in Schedule 1, the approved body shall refuse to issue a Type examination certificate and shall inform the installer accordingly, giving detailed reasons for its refusal.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall keep a copy of the Type examination certificate, its annexes and additions, as well as the technical documentation and the evaluation report for 15 years from the date of issue of that certificate.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/7n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/7n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-7n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">7</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall keep itself apprised of any changes in the generally acknowledged state of the art which indicate that the approved type may no longer comply with the essential health and safety requirements set out in Schedule 1, and shall determine whether such changes require further investigation. If so, the approved body shall inform the installer accordingly.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/8n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/8n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-8n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">8</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The installer shall inform the approved body of any modifications to the approved type, including variations not specified in the original technical documentation, that may affect the conformity of the lift with the essential health and safety requirements set out in Schedule 1 or the conditions of validity of the Type examination certificate.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The approved body shall examine the modification and inform the installer whether the Type examination certificate remains valid or whether further examinations, verifications or tests are needed. As appropriate the approved body shall issue an addition to the original Type examination certificate or ask for a new application for a Type examination to be submitted.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/9n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/9n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-9n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">9</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Each approved body shall inform the Secretary of State concerning the Type examination certificates and any additions thereto which it has issued or withdrawn, and shall, periodically or upon request, make available to the Secretary of State the list of such certificates and any additions thereto refused, suspended or otherwise restricted.</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Each approved body shall inform the other approved bodies concerning the Type examination certificates and any additions thereto which it has refused, withdrawn, suspended or otherwise restricted, and, upon request, concerning such certificates and additions thereto which it has issued.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/10n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/10n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-10n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">10</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The other approved bodies may, on request, obtain a copy of the Type examination certificates and additions thereto.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/11n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/11n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-11n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">11</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The installer shall keep with the technical documentation a copy of the Type examination certificate, including its annexes and additions, at the disposal of the enforcing authorities for 10 years after the lift has been placed on the market.</Addition>
</Text>
</P1para>
</P1>
<P1 DocumentURI="http://www.legislation.gov.uk/uksi/2016/1093/schedule/11/paragraph/12n2/2020-12-31" IdURI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11/paragraph/12n2" RestrictStartDate="2020-12-31" id="schedule-11-paragraph-12n2">
<Pnumber>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">12</Addition>
</Pnumber>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">Authorised representative</Addition>
</Text>
</P1para>
<P1para>
<Text>
<Addition ChangeId="key-bab6ba6bb63318b273db6356bd96a3eb-1664447250212" CommentaryRef="key-bab6ba6bb63318b273db6356bd96a3eb" Extent="E+W+S">The installer's authorised representative may lodge the application referred to in point 2 and fulfil the obligations set out in points 8 and 11, provided that they are specified in the mandate.</Addition>
</Text>
</P1para>
</P1>
</Part>
</ScheduleBody>
</Schedule>
</Schedules>
</Secondary>
<Commentaries>
<Commentary id="key-bab6ba6bb63318b273db6356bd96a3eb" Type="F">
<Para>
<Text>
<CitationSubRef id="cq981lah4-00006" StartSectionRef="schedule-11" EndSectionRef="schedule-19" URI="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/11" UpTo="http://www.legislation.gov.uk/id/uksi/2016/1093/schedule/19">Schs. 11-19</CitationSubRef>
inserted (E.W.S.) (31.12.2020) by
<Citation URI="http://www.legislation.gov.uk/id/uksi/2019/696" id="cq981lah4-00007" Class="UnitedKingdomStatutoryInstrument" Year="2019" Number="696" Title="The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019">The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696)</Citation>
,
<CitationSubRef CitationRef="cq981lah4-00007" id="cq981lah4-00008" SectionRef="regulation-1" URI="http://www.legislation.gov.uk/id/uksi/2019/696/regulation/1">reg. 1</CitationSubRef>
,
<CitationSubRef CitationRef="cq981lah4-00007" id="cq981lah4-00009" SectionRef="schedule-22-paragraph-44" URI="http://www.legislation.gov.uk/id/uksi/2019/696/schedule/22/paragraph/44" Operative="true">Sch. 22 para. 44</CitationSubRef>
(with
<CitationSubRef CitationRef="cq981lah4-00007" id="cq981lah4-00010" SectionRef="schedule-22-paragraph-37" URI="http://www.legislation.gov.uk/id/uksi/2019/696/schedule/22/paragraph/37">Sch. 22 para. 37</CitationSubRef>
) (as amended by
<Citation URI="http://www.legislation.gov.uk/id/uksi/2020/676" id="cq981lah4-00011" Class="UnitedKingdomStatutoryInstrument" Year="2020" Number="676">S.I. 2020/676</Citation>
,
<CitationSubRef CitationRef="cq981lah4-00011" id="cq981lah4-00012" SectionRef="regulation-1-1" URI="http://www.legislation.gov.uk/id/uksi/2020/676/regulation/1/1">regs. 1(1)</CitationSubRef>
,
<CitationSubRef CitationRef="cq981lah4-00011" id="cq981lah4-00013" SectionRef="regulation-2" URI="http://www.legislation.gov.uk/id/uksi/2020/676/regulation/2">2</CitationSubRef>
);
<Citation URI="http://www.legislation.gov.uk/id/ukpga/2020/1" id="cq981lah4-00014" Year="2020" Class="UnitedKingdomPublicGeneralAct" Number="1">2020 c. 1</Citation>
,
<CitationSubRef CitationRef="cq981lah4-00014" id="cq981lah4-00015" SectionRef="schedule-5-paragraph-1-1" URI="http://www.legislation.gov.uk/id/ukpga/2020/1/schedule/5/paragraph/1/1">Sch. 5 para. 1(1)</CitationSubRef>
</Text>
</Para>
</Commentary>
</Commentaries>
</Legislation>