The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016

Chapter 5E+W+SAll economic operators

Identification of economic operatorsE+W+S

35.—(1) An economic operator (“E”) who receives a request from the market surveillance authority before the end of the relevant period, must, within such period as the authority may specify, identify to the authority—

(a)any economic operator who has supplied E with a product, and

(b)any economic operator to whom E has supplied a product.

(2) The relevant period is—

(a)for information under paragraph (1)(a), a period of 10 years beginning on the day on which E was supplied with the product;

(b)for information under paragraph (1)(b), a period of 10 years beginning on the day on which E supplied the product.

Commencement Information

I1Reg. 35 in force at 8.12.2016, see reg. 1(1)

Prohibition on improper use of [F1UK] markingE+W+S

36.—(1) An economic operator must not affix the [F2UK] marking to a product unless—

(a)that economic operator is the manufacturer, and

(b)the conformity of the product with the essential health and safety requirements has been demonstrated by a relevant conformity assessment procedure.

(2) An economic operator must not affix to a product a marking (other than the [F2UK] marking) which purports to attest that the product is in conformity with the essential health and safety requirements.

(3) An economic operator must not affix to a product a marking, sign or inscription which is likely to mislead any other person as to the meaning or form of the [F2UK] marking.

(4) An economic operator must not affix to a product any other marking if the visibility, legibility and meaning of the [F2UK] marking would be impaired as a result.

Textual Amendments

Commencement Information

I2Reg. 36 in force at 8.12.2016, see reg. 1(1)

[F3Obligations which are met by complying with obligations in the ATEX DirectiveE+W+S

36A.—(1) In this regulation—

(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the ATEX Directive;

(b)“CE marking” has the meaning given to it in Article 2(26); and

(c)“harmonised standard” has the meaning given to in in Article 2(18).

(2) Subject to paragraphs (6) and (7) paragraph (3) applies where, before placing the product on the market, the manufacturer—

(a)ensures that the product has been designed and manufactured in accordance with the essential safety requirements set out in Annex II;

(b)ensures that the relevant conformity assessment procedures that apply to that product in accordance with Article 13(1) and (2) have been carried out;

(c)draws up the technical documentation referred to in Annexes III to IX;

(d)ensures that the records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;

(e)affixes a CE marking and the inscriptions in accordance with Articles 15 and 16(1) to (4);

(f)draws up an EU declaration of conformity, in accordance with Article 14; and

(g)ensures that the declaration of conformity is prepared in or translated into English.

(3) Where this paragraph applies—

(a)the requirements of regulations 5, 6, 7(1), (3) and 7(6) are to be treated as being satisfied;

(b)regulations 2(a), 7(6), 8, 9(2), 17(4), 36 and 59 apply subject to the modifications in paragraph (10);

(c)Part 3 does not apply; and

(d)regulation 57 does not apply.

(4) Subject to paragraphs (6) and (7) paragraph (5) applies where, before placing a product on the market, the importer ensures that—

(a)the relevant conformity assessment procedure referred to in Article 13 has been carried out;

(b)the manufacturer has drawn up the technical documents relevant to the conformity assessment procedure followed; and

(c)the product bears the CE marking and inscriptions referred to in point 1.0.5 of Annex II.

(5) Where this paragraph applies—

(a)the requirements of regulation 19(1)(a) to (c) are to be treated as being satisfied; and

(b)regulations 2(a),18, 23 and 27 apply subject to the modifications in paragraph (10).

(6) This paragraph applies where there is no designated standard or part of a designated standard which corresponds exactly to a harmonised standard or part of a harmonised standard referred to in Article 12.

(7) Where paragraph (6) applies, paragraphs (2)(b) and (4)(a) are to be treated as requiring the manufacturer to carry out—

(a)the conformity assessment procedure set out in Article 13(1)(b); and

(b)the relevant conformity assessment procedure that applies to that product in accordance with Article 13(2).

(8) Paragraph (9) applies where, before making a product available on the market, a distributor ensures that the product bears the CE marking and inscriptions referred to in point 1.0.5 of Annex II.

(9) Where this paragraph applies—

(a)regulation 29(1)(a)(i) is to be treated as being satisfied; and

(b)regulations 2(a), 30 and 31(1) apply subject to the modifications in paragraph (10).

(10) The modifications referred to in subparagraphs (3)(b), (5)(b) and (9)(b) are that—

(a)any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity;

(b)any reference to “UK marking” is to be read as reference to the CE marking;

(c)any reference to “essential safety requirements” is to be read as a reference to the essential safety requirements referred to in Annex II;

(d)any reference to “designated standard” is to be read as a reference to a harmonised standard;

(e)any reference to “relevant conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedures referred to in Article 13;

(f)any reference to “technical documentation” is a reference to the technical documentation referred to in Annexes III to IX.

Textual Amendments

F3Regs. 36A-36D inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 21 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2) (as amended by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 17(3)); 2020 c. 1, Sch. 5 para. 1(1)

Conformity assessment procedure obligation which is met by complying with the ATEX DirectiveE+W+S

36B.—(1) In this regulation any reference to an Article or Annex is a reference to an Article or an Annex of the ATEX Directive;

(2) Paragraph (3) applies where, prior to the manufacture of a product, the manufacturer ensures that the conformity assessment procedure that applies to that product in accordance with Annex III as referred to in Article 13(1)(a) and (b) has been carried out.

(3) Where this paragraph applies—

(a)any requirement to follow the Type-examination set out in Part 1 of Schedule 3A in regulation 39 is to be treated as being satisfied;

(b)any reference to “relevant conformity assessment procedure” in regulations 6(a), 7(1), 19(a), 36(1)(b), 40(c) and 41(3) is to be read as including the conformity assessment procedure set out in Annex III as referred to in Article 13(1)(a) and (b); and

(c)any reference to “technical documentation” in regulations 6(b), 8, 19(b) and 27(b) is to be read as including the technical documentation relating to the design of the product referred to in Annex III.

Textual Amendments

F3Regs. 36A-36D inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 21 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2) (as amended by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 17(3)); 2020 c. 1, Sch. 5 para. 1(1)

Expiry of regulations 36A and 36BE+W+S

36C.—(1) Subject to paragraph (2), regulation 36A ceases to have effect at the end of the period of [F4four years] beginning with IP completion day.

(2) Notwithstanding the expiry of regulation 36A—

(a)any product which was placed on the market pursuant to regulation 36A may continue to be made available on the market on or after the expiry of regulation 36A;

(b)any obligation to which a person was subject under regulation 36A in respect of any product placed on the market pursuant to regulation 36A continues to have effect after the expiry of regulation 36A, in respect of that product.

(3) Subject to paragraph (4), regulation 36B ceases to have effect at the end of the period of [F5four years] beginning with IP completion day.

(4) Where a conformity assessment procedure has been completed pursuant to regulation 36B in relation to a product prior to the expiry of regulation 36B, regulation 36B continues to apply in respect of that pressure equipment or assembly where—

(a)the manufacturer arranges for the EU-Type examination certificate and any annexes to be transferred to an approved body;

(b)the approved body referred to in sub-paragraph (a) accepts responsibility for the EU-Type examination certificate; and

(c)the approved body issues a Type-examination certificate relying, or relying in part, on any examinations or tests undertaken prior to the issue of the EU-Type examination certificate.

(5) In paragraph (4) “EU-Type examination certificate” means a certificate issued after the conformity assessment referred to in regulation 36B(2) has been carried out.

Textual Amendments

F3Regs. 36A-36D inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 21 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2) (as amended by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 17(3)); 2020 c. 1, Sch. 5 para. 1(1)

Qualifying Northern Ireland GoodsE+W+S

36D.—(1) In this regulation—

“the 2017 Regulations” means the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (Northern Ireland) 2017;

“CE marking” has the meaning given to it in regulation 2(1) of the 2017 Regulations;

“qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018;

“relevant conformity assessment procedure” has the meaning given to it in regulation 2(1) of the 2017 Regulations;

“technical documentation” has the meaning given to it in regulation 2(1) of the 2017 Regulations.

(2) Where paragraph (3) applies, a product is to be treated as being in conformity with Part 2.

(3) This paragraph applies where—

(a)a product—

(i)is in conformity with Part 2, within the meaning of regulation 2(2) of the 2017 Regulations; and

(ii)is qualifying Northern Ireland goods; and

(b)an importer has complied with the obligations set out in paragraph (4).

(4) The obligations referred to in paragraph (3)(b) are that, before placing the product on the market, the importer—

(a)complies with regulation 21;

(b)ensures that—

(i)the relevant conformity assessment procedure has been carried out in relation to the product;

(ii)the manufacturer has drawn up the technical documentation; and

(iii)the product bears the CE marking.]

Textual Amendments

F3Regs. 36A-36D inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 21 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2) (as amended by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 17(3)); 2020 c. 1, Sch. 5 para. 1(1)

Translation of declaration of conformityE+W+S

F637.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments