Design and constructionE+W+S
This section has no associated Explanatory Memorandum
44.—(1) With regard to the design and construction of recreational craft, the following conformity assessment procedures set out in [Schedule 15] apply—
(a)for design categories A and B referred to in paragraph 1 of Part A of Schedule 1—
(i)for recreational craft of hull length from 2.5 metres to less than 12 metres, any of the following modules—
(aa)Module A1 (internal production control plus supervised product testing);
(bb)Module B [(type examination)] together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);
(cc)Module G (conformity based on unit verification);
(dd)Module H (conformity based on full quality assurance);
(ii)for recreational craft of hull length from 12 metres to less than 24 metres, any of the following modules—
(aa)Module B [(type examination)] together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(bb)Module G (conformity based on unit verification);
(cc)Module H (conformity based on full quality assurance);
(b)for design category C referred to in paragraph 1 of Part A of Schedule 1—
(i)for recreational craft of hull length from 2.5 metres to less than 12 metres where the [designated] standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are complied with, any of the following modules—
(aa)Module A (internal production control);
(bb)Module A1 (internal production control plus supervised product testing);
(cc)Module B ([type examination] together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(dd)Module G (conformity based on unit verification);
(ee)Module H (conformity based on full quality assurance);
(ii)for recreational craft of hull length from 2.5 metres to less than 12 metres where the [designated] standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are not complied with, any of the following modules—
(aa)Module A1 (internal production control plus supervised testing);
(bb)Module B ([type examination]) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;
(cc)Module G (conformity based on unit verification);
(dd)Module H (conformity based on full quality assurance);
(iii)for recreational craft of hull length from 12 metres to 24 metres, any of the following modules—
(aa)Module B ([type examination]) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;
(bb)Module G (conformity based on unit verification);
(cc)Module H (conformity based on full quality assurance);
(c)for design category D referred to in paragraph 1 of Part A of Schedule 1 for recreational craft of hull length of 2.5 metres to 24 metres, any of the following modules—
(i)Module A (internal production control);
(ii)Module A1 (internal production control plus supervised testing);
(iii)Module B ([type examination] together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);
(iv)Module G (conformity based on unit verification);
(v)Module H (conformity based on full quality assurance).
(2) With regard to the design and construction of personal watercraft, any of the following procedures set out in [Schedule 15] apply—
(a)Module A (internal production control);
(b)Module A1 (internal production control plus supervised testing);
(c)Module B ([type examination] together with Module C conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(d)Module G (conformity based on unit verification);
(e)Module H (conformity based on full quality assurance).
(3) With regard to the design and construction of components any of the following procedures set out in [Schedule 15] apply—
(a)Module B [(type examination)] together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(b)Module G (conformity based on unit verification);
(c)Module H (conformity based on full quality assurance).
Extent Information
Textual Amendments
Commencement Information
Design and constructionN.I.
44.—(1) With regard to the design and construction of recreational craft, the following conformity assessment procedures set out in Annex II to Decision 768/2008/EC apply—
(a)for design categories A and B referred to in paragraph 1 of Part A of Schedule 1—
(i)for recreational craft of hull length from 2.5 metres to less than 12 metres, any of the following modules—
(aa)Module A1 (internal production control plus supervised product testing);
(bb)Module B (EU-type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);
(cc)Module G (conformity based on unit verification);
(dd)Module H (conformity based on full quality assurance);
(ii)for recreational craft of hull length from 12 metres to less than 24 metres, any of the following modules—
(aa)Module B (EU-type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(bb)Module G (conformity based on unit verification);
(cc)Module H (conformity based on full quality assurance);
(b)for design category C referred to in paragraph 1 of Part A of Schedule 1—
(i)for recreational craft of hull length from 2.5 metres to less than 12 metres where the harmonised standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are complied with, any of the following modules—
(aa)Module A (internal production control);
(bb)Module A1 (internal production control plus supervised product testing);
(cc)Module B (EU type-examination together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(dd)Module G (conformity based on unit verification);
(ee)Module H (conformity based on full quality assurance);
(ii)for recreational craft of hull length from 2.5 metres to less than 12 metres where the harmonised standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are not complied with, any of the following modules—
(aa)Module A1 (internal production control plus supervised testing);
(bb)Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;
(cc)Module G (conformity based on unit verification);
(dd)Module H (conformity based on full quality assurance);
(iii)for recreational craft of hull length from 12 metres to 24 metres, any of the following modules—
(aa)Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;
(bb)Module G (conformity based on unit verification);
(cc)Module H (conformity based on full quality assurance);
(c)for design category D referred to in paragraph 1 of Part A of Schedule 1 for recreational craft of hull length of 2.5 metres to 24 metres, any of the following modules—
(i)Module A (internal production control);
(ii)Module A1 (internal production control plus supervised testing);
(iii)Module B (EU- type examination together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);
(iv)Module G (conformity based on unit verification);
(v)Module H (conformity based on full quality assurance).
(2) With regard to the design and construction of personal watercraft, any of the following procedures set out in Annex II to Decision 768/2008/EC apply—
(a)Module A (internal production control);
(b)Module A1 (internal production control plus supervised testing);
(c)Module B (EU type-examination together with Module C conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(d)Module G (conformity based on unit verification);
(e)Module H (conformity based on full quality assurance).
(3) With regard to the design and construction of components any of the following procedures set out in Annex II to Decision 768/2008/EC apply—
(a)Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);
(b)Module G (conformity based on unit verification);
(c)Module H (conformity based on full quality assurance).
Extent Information
Commencement Information