Print Options
PrintThe Whole
Instrument
PrintThe Whole
Part
PrintThis
Section
only
Status:
This is the original version (as it was originally made).
Noise emissions: personal watercraft
This section has no associated Explanatory Memorandum
47.—(1) The personal watercraft or engine manufacturer must apply the relevant procedure in paragraphs (2) or (3) as set out in Annex II to Decision 768/2008/EC, with regard to noise emissions for—
(a)personal watercraft and outboard propulsion engines; and
(b)stern drive propulsion engines with integral exhausts intended for installation on recreational craft.
(2) Where the tests are conducted using the harmonised standard for noise measurement, any of the following modules apply—
(a)Module A1 (internal production control plus supervised product testing);
(b)Module G (conformity based on unit verification);
(c)Module H (conformity based on full quality assurance).
(3) Where the tests are conducted without using the harmonised standard for noise measurement, Module G (conformity based on unit verification) applies.
Back to top