SCHEDULE 13E+W+SAmendment of the Aerosol Dispensers Regulations 2009

Amendment to regulation 3E+W+S

3.  In regulation 3 (requirements for the marking of aerosol dispensers)—

[F1(a)in paragraph (1)—

(i)after “dispenser” insert “ or where paragraph (1A) applies, on a label affixed to, or a document accompanying, the aerosol dispenser ”;

(ii)for “a compliance mark” substitute “ the UK marking ”;]

[F2(aa)after paragraph (1) insert—

(1A) For a period of 24 months beginning with IP completion day, the UK marking may be affixed to—

(a)a label affixed to the aerosol dispenser; or

(b)a document accompanying the aerosol dispenser.;]

(b)in each place in which it occurs, for “the Annex to the Directive” substitute “ Schedule 1A ”;

(c)in paragraph (7)(b) after “6.1.3” insert “ of Schedule 1A ”;

(d)in paragraph (7)(c)—

(i)after “6.1.4.1(a)”, “6.1.4.1(b)” and “6.1.4.1(c)” (in paragraphs (i), (ii) and (iii) respectively), insert “ of Schedule 1A ”;

(ii)after “6.1.4.2” in both places in which it occurs insert “ of that Schedule ”;

(e)for paragraph (8)(a) substitute—

(a)the following information—

(i)the name and address or trade mark of the person responsible for marketing the aerosol dispenser;

(ii)code markings enabling the filling batch to be identified;

(iii)the details referred to in point 2.2 of Schedule 1A; and

(iv)where an aerosol dispenser—

(aa)contains flammable components as defined in point 1.8 of Schedule 1A; and

(bb)is not classified as extremely flammable or flammable in accordance with the classifications set out in point 1.9 of Schedule 1A;

the quantity of flammable material contained in the aerosol dispenser must be clearly stated on the label in legible and indelible wording in the following form—“X % by mass of the contents are flammable”;.

Textual Amendments

Commencement Information

I1Sch. 13 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1