Commission Decision of 25 January 1999 on the procedure for attesting the conformity of construction products pursuant to Article 20(2) of Council Directive 89/106/EEC as regards precast normal/light-weight/autoclaved aerated concrete products (notified under document number C(1999) 118) (Text with EEA relevance) (1999/94/EC)

ANNEX IIIPRODUCT FAMILY

PRECAST NORMAL/LIGHTWEIGHT/AUTOCLAVED AERATED CONCRETE PRODUCTS (1/1)

1. Systems of attestation of conformity

For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

^a Light structural use refers to applications that in case of failure are not supposed to cause the collapse of the works or part of them, inadmissible deformations or injury to people (to be defined by Member States).
System 2 +: See Directive 89/106/EEC, Annex III(2)(ii), First possibility, including certification of the factory production control by an approved body on the basis of initial inspection of factory and of factory production control as well as of continuous surveillance assessment and approval of factory production control. System 4: See Directive 89/106/EEC, Annex III(2)(ii), Third possibility.
Product(s)	Intended use(s)	Level(s) or class(es)	Attestation of conformity system(s)
Precast normal/lightweight/autoclaved aerated concrete products	for structural use — for non-structural or light structural use^a	— — —	2 + — 4

Light structural use refers to applications that in case of failure are not supposed to cause the collapse of the works or part of them, inadmissible deformations or injury to people (to be defined by Member States).

System 2 +: See Directive 89/106/EEC, Annex III(2)(ii), First possibility, including certification of the factory production control by an approved body on the basis of initial inspection of factory and of factory production control as well as of continuous surveillance assessment and approval of factory production control.

System 4: See Directive 89/106/EEC, Annex III(2)(ii), Third possibility.

Product(s)

Intended use(s)

Level(s) or class(es)

Attestation of conformity system(s)

Precast normal/lightweight/autoclaved aerated concrete products

for structural use

—

for non-structural or light structural use^a

—

2 +

—

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3. of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.