Chwilio Deddfwriaeth

Directive 94/25/EC of the European Parliament and of the Council (repealed)Dangos y teitl llawn

Directive 94/25/EC of the European Parliament and of the Council of 16 June 1994 on the approximation of the laws, regulations and administrative provisions of the Member States relating to recreational craft (repealed)

 Help about what version

Pa Fersiwn

 Help about advanced features

Nodweddion Uwch

 Help about opening options

Dewisiadau AgorExpand opening options

 Help about UK-EU Regulation

Deddfwriaeth yn deillio o’r UE

Pan adawodd y DU yr UE, cyhoeddodd legislation.gov.uk ddeddfwriaeth yr UE a gyhoeddwyd gan yr UE hyd at ddiwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.). Ar legislation.gov.uk, mae'r eitemau hyn o ddeddfwriaeth yn cael eu diweddaru'n gyson ag unrhyw ddiwygiadau a wnaed gan y DU ers hynny.

Changes over time for: ANNEX XVI

 Help about opening options

Version Superseded: 01/01/2013

Status:

Cyhoeddir Cyfarwyddebau’r UE ar y wefan hon i gynorthwyo croesgyfeirio o ddeddfwriaeth y DU. Ers diwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.) nid oes unrhyw ddiwygiadau wedi'u cymhwyso i'r fersiwn hon.

[F1ANNEX XVI U.K. PRODUCT QUALITY ASSURANCE (MODULE E)

1. This module describes the procedure whereby the manufacturer who satisfies the obligations of point 2 ensures and declares that the products concerned are in conformity with the type as described in the EC type-examination certificate and satisfy the requirements of the directive that apply to them. The manufacturer or his authorised representative established within the Community must affix the CE mark to each product and draw up a written declaration of conformity. The CE mark must be accompanied by the identification symbol of the notified body responsible for surveillance as specified in point 4. U.K.

2. The manufacturer must operate an approved quality system for final product inspection and testing as specified in point 3 and must be subject to surveillance as specified in point 4. U.K.

3. Quality system U.K.

3.1. The manufacturer must lodge an application for assessment of his quality system for the products concerned, with a notified body of his choice. U.K.

The application must include:

  • all relevant information for the product category envisaged,

  • the quality system's documentation,

  • if applicable, the technical documentation of the approved type and a copy of the EC type-examination certificate.

3.2. Under the quality system, each product must be examined and appropriate tests as set out in the relevant standard(s) referred to in Article 5 or equivalent tests shall be carried out in order to ensure its conformity with the relevant requirements of the directive. All the elements, requirements and provisions adopted by the manufacturer must be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. This quality system documentation must ensure a common understanding of the quality programmes, plans, manuals and records. U.K.

It must contain in particular an adequate description of:

  • the quality objectives and the organisational structure, responsibilities and powers of the management with regard to product quality,

  • the examinations and tests that will be carried out after manufacture,

  • the means to monitor the effective operation of the quality system,

  • quality records, such as inspection reports and test data, calibration data, qualification reports of the personnel concerned, etc.

3.3. The notified body must assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. U.K.

It presumes conformity with these requirements in respect of quality systems that implement the relevant harmonised standard.

The auditing team must have at least one member experienced as an assessor in the product technology concerned. The assessment procedure must include an assessment visit to the manufacturer's premises.

The decision must be notified to the manufacturer. The notification must contain the conclusions of the examination and the reasoned assessment decision.

3.4. The manufacturer must undertake to fulfil the obligations arising from the quality system as approved and to maintain it in an appropriate and efficient manner. U.K.

The manufacturer or his authorised representative must keep the notified body which has approved the quality system informed of any intended updating of the quality system.

The notified body must evaluate the modifications proposed and decide whether the modified quality system will still satisfy the requirements referred to in point 3.2 or whether a reassessment is required.

It must notify its decision to the manufacturer. The notification must contain the conclusions of the examination and the reasoned assessment decision.

4. Surveillance under the responsibility of the notified body U.K.

4.1. The purpose of surveillance is to make sure that the manufacturer duly fulfils the obligations arising out of the approved quality system. U.K.

4.2. The manufacturer must allow the notified body entrance for inspection purposes to the locations of inspection, testing and storage and shall provide it with all necessary information, in particular: U.K.

  • the quality system documentation,

  • the technical documentation,

  • the quality records, such as inspection reports and test data, calibration data, qualification reports of the personnel concerned, etc.

4.3. The notified body must periodically carry out audits to ensure that the manufacturer maintains and applies the quality system and must provide an audit report to the manufacturer. U.K.

4.4. Additionally, the notified body may pay unexpected visits to the manufacturer. At the time of such visits, the notified body may carry out tests or have them carried out in order to check the proper functioning of the quality system where necessary; it must provide the manufacturer with a visit report and, if a test has been carried out, with a test report. U.K.

5. The manufacturer must, for a period ending at least 10 years after the last product has been manufactured, keep at the disposal of the national authorities: U.K.

  • the documentation referred to in the third indent of the second subparagraph of point 3.1,

  • the updating referred to in the second subparagraph of point 3.4,

  • the decisions and reports from the notified body which are referred to in the final subparagraph of point 3.4, points 4.3 and 4.4.

6. Each notified body must forward to the other notified bodies the relevant information concerning the quality system approvals issued and withdrawn.] U.K.

Yn ôl i’r brig

Options/Help

You have chosen to open the Whole Directive

The Whole Directive you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

Y Rhestrau you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?