xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
Article 1.(1) This Directive applies to: (a) the dimensions of motor...
Article 2.For the purposes of this Directive: ‘motor vehicle’ shall mean...
Article 3.(1) A Member State may not reject or prohibit the...
Article 4.(1) Member States shall not authorise the normal circulation within...
Article 5.Articulated vehicles put into circulation before 1 January 1991 which...
Article 6.(1) Member States shall take the necessary measures to ensure...
Article 7.This Directive shall not preclude the application of road traffic...
Article 8b.(1) With the aim of improving their energy efficiency, vehicles...
Article 9a.(1) With the aim of improving energy efficiency, in particular...
Article 10.The Directive listed in Annex IV, Part A, shall be...
Article 10b.The maximum authorised weights of alternatively fuelled or zero-emission vehicles...
Article 10c.The maximum lengths laid down in point 1.1 of Annex...
Article 10d.(1) By 27 May 2021 , Member States shall take...
Article 10e.Member States shall lay down rules on penalties applicable to...
Article 10f.(1) For the transport of containers and swap bodies, Member...
Article 10g.Every 2 years, and at the latest by 30 September...
Article 10h.(1) The power to adopt delegated acts is conferred on...
Article 10i.(1) The Commission shall be assisted by the Road Transport...
Article 10j.By 8 May 2020 , the Commission shall submit, as...
Article 11.(1) Member States shall bring into force the laws, regulations...
Article 12.This Directive shall enter into force on the day of...
Article 13.This Directive is addressed to the Member States.
MAXIMUM WEIGHTS AND DIMENSIONS AND RELATED CHARACTERISTICS OF VEHICLES
2.1. during free transient low frequency vertical oscillation of the sprung...
2.2. each axle must be fitted with hydraulic dampers. On tandem...
2.4. the damping ratio D of the suspension with all hydraulic...
2.5. the frequency of the sprung mass above the driving axle...
2.6. the frequency and damping of the suspension are given in...
PLATE RELATING TO DIMENSIONS REFERRED TO IN ARTICLE 6 (1) (a)