Directive 98/8/EC of the European Parliament and of the Council (repealed)Dangos y teitl llawn

ANNEX I U.K. LIST OF ACTIVE SUBSTANCES WITH REQUIREMENTS AGREED AT COMMUNITY LEVEL FOR INCLUSION IN BIOCIDAL PRODUCTS

a [F2 For the implementation of the common principles of Annex VI, the content and conclusions of assessment reports are available on the Commission website: http://ec.europa.eu/comm/environment/biocides/index.htm
b [F3 OJ L 396, 30.12.2006, p. 1 .
c OJ L 158, 30.4.2004, p. 50 .] ] ]
[F1 No	Common Name	IUPAC Name Identification Numbers	Minimum purity of the active substance in the biocidal product as placed on the market	Date of inclusion	Deadline for compliance with Article 16(3) (except for products containing more than one active substance, for which the deadline to comply with Article 16(3) shall be the one set out in the last of the inclusion decisions relating to its active substances)	Expiry date of inclusion	Product type	Specific provisions a
1	sulfuryl fluoride	sulfuryl difluoride EC No: 220-281-5 CAS No: 2699-79-8	> 994 g/kg	1 January 2009	31 December 2010	31 December 2018	8	Member States shall ensure that authorisations are subject to the following conditions: (1) the product may only be sold to and used by professionals trained to use it; (2) appropriate risk mitigation measures are included for operators and bystanders; (3) concentrations of sulfuryl fluoride in remote tropospheric air are monitored. Member States shall also ensure that reports of the monitoring referred to in point (3) are transmitted by authorisation holders directly to the Commission every fifth year starting from 1 January 2009 .
[F4			994 g/kg	1 July 2011	30 June 2013	30 June 2021	18	Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall only be sold to and used by professionals trained to use them. (2) Appropriate measures to protect fumigators and bystanders during fumigation and venting of treated buildings or other enclosures must be taken. (3) Labels and/or safety-data sheets of products shall indicate that, prior to fumigation of any enclosure, all food items must be removed. (4) Concentrations of sulfuryl fluoride in remote tropospheric air are monitored. (5) Member States shall also ensure that reports of the monitoring referred to in point (4) are transmitted by authorisation holders directly to the Commission every fifth year, starting at the latest five years after the authorisation. The limit of detection for the analysis shall be at least 0,5 ppt (equivalent to 2,1 ng sulfuryl fluoride/m 3 of tropospheric air).]
[F5 2	dichlofluanid	N-(Dichlorofluoromethylthio)-N′,N′-dimethyl-N-phenylsulfamide EC No: 214-118-7 CAS No: 1085-98-9	> 96 % w/w	1 March 2009	28 February 2011	28 February 2019	8	Member States shall ensure that authorisations are subject to the following conditions: (1) Products authorised for industrial and/or professional use must be used with appropriate personal protective equipment. (2) In view of the risks identified for the soil compartment appropriate risk mitigation measures must be taken to protect that compartment. (3) Labels and/or safety-data sheets of products authorised for industrial use indicate that freshly treated timber must be stored after treatment on impermeable hard standing to prevent direct losses to soil and that any losses must be collected for re-use or disposal.]
[F6 3	clothianidin	(E)-1-(2-Chloro-1,3-thiazol-5-ylmethyl)-3-methyl-2-nitroguanidine EC No: 433-460-1 CAS No: 210880-92-5	950 g/kg	1 February 2010	31 January 2012	31 January 2020	8	When assessing, in accordance with Article 5 and Annex VI, the application for authorisation of a product, Member States shall assess those use/exposure scenarios and/or populations that have not been representatively addressed in the Community level risk assessment and that may be exposed to the product. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: In view of the risk identified for the soil, surface water and groundwater compartments, products cannot be authorised for the treatment of wood that will be used outdoors unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use indicate that freshly treated timber must be stored after treatment on impermeable hard standing to prevent direct losses to soil and that any losses must be collected for reuse or disposal.]
[F7 4	Difethialone	3-[3-(4′-bromo[1,1′biphenyl]-4-yl)-1,2,3,4-tetrahydronaphth-1-yl]-4-hydroxy-2H-1-benzothiopyran-2-one EC No: n/a CAS No: 104653-34-1	976 g/kg	1 November 2009	31 October 2011	31 October 2014	14	In view of the fact that the active substance characteristics render it potentially persistent, liable to bioaccumulate and toxic, or very persistent and very liable to bioaccumulate, the active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in the products shall not exceed 0,0025 % w/w and only ready-for-use baits shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Products shall not be used as tracking powder. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F8 5	etofenprox	3-phenoxybenzyl-2-(4-ethoxyphenyl)-2-methylpropylether EC No: 407-980-2 CAS No: 80844-07-1	970 g/kg	1 February 2010	31 January 2012	31 January 2020	8	When assessing, in accordance with Article 5 and Annex VI, the application for authorisation of a product, Member States shall access those use and/or exposure scenarios and/or populations that have not been representatively addressed in the Community level risk assessment and that may be exposed to the product. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: In view of the risk identified for workers, products cannot be used year round unless dermal absorption data is provided to demonstrate that there are no unacceptable risks from chronic exposure. In addition, products intended for industrial use must be used with appropriate personal protective equipment.]
[F9 6	tebuconazole	1-(4-chlorophenyl)-4,4-dimethyl-3-(1,2,4-triazol-1-ylmethyl)pentan-3-ol EC No: 403-640-2 CAS No: 107534-96-3	950 g/kg	1 April 2010	31 March 2012	31 March 2020	8	Member States shall ensure that authorisations are subject to the following conditions: In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal. In addition, products cannot be authorised for the in situ treatment of wood outdoors or for wood that will be in continuous contact with water unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F10 7	carbon dioxide	carbon dioxide EC No: 204-696-9 CAS No: 124-38-9	990 ml/l	1 November 2009	31 October 2011	31 October 2019	14	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels.]
[F11			990 ml/l	1 November 2012	31 October 2014	31 October 2022	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the European level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Member States shall ensure that authorisations are subject to the following conditions: (1) Product shall only be sold to and used by professionals trained to use them. (2) Appropriate measures to protect operators shall be taken to ensure minimum risk, including the availability of personal protective equipment if necessary. (3) Appropriate measures shall be taken to protect bystanders, such as exclusion from the treatment area during fumigation.]
[F12 8	propiconazole	1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole EC No: 262-104-4 CAS No: 60207-90-1	930 g/kg	1 April 2010	31 March 2012	31 March 2020	8	Member States shall ensure that authorisations are subject to the following conditions: In view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use, must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal. In addition, products cannot be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F13 9	Difenacoum	3-(3-biphenyl-4-yl-1,2,3,4-tetrahydro-1-naphthyl)-4-hydroxycoumarin EC No: 259-978-4 CAS No: 56073-07-5	960 g/kg	1 April 2010	31 March 2012	31 March 2015	14	In view of the fact that the active substance characteristics render it potentially persistent, liable to bioaccumulate and toxic, or very persistent and very liable to bioaccumulate, the active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in the products shall not exceed 75 mg/kg and only ready-for-use products shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Products shall not be used as tracking powder. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F14 10	K-HDO	Cyclohexylhydroxydiazene 1-oxide, potassium salt EC No: n/a CAS No: 66603-10-9 (This entry also covers the hydrated forms of K-HDO)	977 g/kg	1 July 2010	30 June 2012	30 June 2020	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) in view of the possible risks for the environment and workers, products shall not be used in other systems than industrial, fully automated and closed ones unless the application for product authorisation demonstrates that risks can be reduced to acceptable levels in accordance with Article 5 and Annex VI; (2) in view of the assumptions made during the risk assessment, products must be used with appropriate personal protective equipment, unless the application for product authorisation demonstrates that risks to users can be reduced to acceptable levels by other means; (3) in view of the risk identified for infants, products shall not be used for the treatment of wood that may enter in direct contact with infants.]
[F15 11	IPBC	3-iodo-2-propynyl butylcarbamate EC No: 259-627-5 CAS No: 55406-53-6	980 g/kg	1 July 2010	30 June 2012	30 June 2020	8	Member States shall ensure that authorisations are subject to the following conditions: In view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use, must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hardstanding to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F16 12	Chlorophacinone	Chlorophacinone EC No: 223-003-0 CAS No: 3691-35-8	978 g/kg	1 July 2011	30 June 2013	30 June 2016	14	In view of the identified risks for non-target animals, the active substance shall be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in products other than tracking powder shall not exceed 50 mg/kg and only ready-for use products shall be authorised. (2) Products to be used as tracking powder shall only be placed on the market for use by trained professionals. (3) Products shall contain an aversive agent and, where appropriate, a dye. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F17 13	Thiabendazole	2-thiazol-4-yl-1H-benzoimidazole EC No: 205-725-8 CAS No: 148-79-8	985 g/kg	1 July 2010	30 June 2012	30 June 2020	8	Member States shall ensure that authorisations are subject to the following conditions: in view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use, with respect to the double-vacuum and dipping application tasks, must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by others means. In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal. Products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F18 14	thiamethoxam	thiamethoxam EC No: 428-650-4 CAS No: 153719-23-4	980 g/kg	1 July 2010	30 June 2012	30 June 2020	8	Member States shall ensure that authorisations are subject to the following conditions: In view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal. Products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data have been submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F19 15	alphachloralose	(R)-1,2-O-(2.2,2-Trichloroethylidene)-α-D-glucofuranose EC No: 240-016-7 CAS No: 15879-93-3	825 g/kg	1 July 2011	30 June 2013	30 June 2021	14	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. In particular, products cannot be authorised for outdoor use unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in the products shall not exceed 40 g/kg. (2) Products shall contain an aversive agent and a dye. (3) Only products for use in tamper resistant and securely closed bait boxes shall be authorised.]
[F20 16	brodifacoum	3-[3-(4'-bromobiphenyl-4-yl)-1,2,3,4-tetrahydro-1-napthyl]-4-hydroxycoumarin EC No: 259-980-5 CAS No: 56073-10-0	950 g/kg	1 February 2012	31 January 2014	31 January 2017	14	In view of the fact that the active substance characteristics render it potentially persistent, liable to bioaccumulate and toxic, or very persistent and very liable to bioaccumulate, the active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in the products shall not exceed 50 mg/kg and only ready-for-use products shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Products shall not be used as tracking powder. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F21 17	bromadiolone	3-[3-(4’-Bromo[1,1’-biphenyl]-4-yl)-3-hydroxy-1-phenylpropyl]-4-hydroxy-2H-1-benzopyran-2-one EC No: 249-205-9 CAS No: 28772-56-7	969 g/kg	1 July 2011	30 June 2013	30 June 2016	14	In view of the fact that the active substance characteristics render it potentially persistent, liable to bioaccumulate and toxic, or very persistent and very liable to bioaccumulate, the active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in the products shall not exceed 50 mg/kg and only ready-for-use products shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Products shall not be used as tracking powder. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F22 18	Thiacloprid	(Z)-3-(6-chloro-3-pyridylmethyl)-1,3-thiazolidin-2-ylidenecyanamide EC No: n/a CAS No: 111988-49-9	975 g/kg	1 January 2010	n/a	31 December 2019	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) In view of the assumptions made during the risk assessment, products authorised for industrial and/or professional use, must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal. (3) Products shall not be authorised for the in situ treatment of wooden structures near water, where direct losses to the aquatic compartment cannot be prevented, or for wood that will be in contact with surface water, unless data have been submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F23 19	Indoxacarb (enantiomeric reaction mass S:R 75:25)	Reaction mass of methyl (S)- and methyl(R)-7-chloro-2.3,4a,5-tetrahydro-2-[methoxycarbonyl-(4-trifluoromethoxyphenyl) carbamoyl]indeno[1,2-e][1.3,4]oxadiazine-4a-carboxylate (This entry covers the 75:25 reaction mass of the S and R enantiomers) EC No: n/a CAS No: S-enantiomer: 173584-44-6 and R-enantiomer: 185608-75-7)	796 g/kg	1 January 2010	n/a	31 December 2019	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: Appropriate risk mitigation measures must be taken to minimise the potential exposure of humans, of non-target species and of the aquatic environment. In particular, labels and/or safety-data sheets of products authorised shall indicate that: (1) Products shall not be placed in areas accessible to infants, children and companion animals. (2) Products shall be positioned away from external drains. (3) Unused products shall be disposed of properly and not washed down the drain. For amateur uses, only ready-to-use products shall be authorised.]
[F24 20	aluminium phosphide releasing phosphine	aluminium phosphide EC No: 244-088-0 CAS No: 20859-73-8	830 g/kg	1 September 2011	31 August 2013	31 August 2021	14	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. In particular, products cannot be authorised for indoor use unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall only be sold to and used by specifically trained professionals. (2) In view of the risks identified for operators, appropriate risk mitigation measures must be applied. These include, amongst others, the use of appropriate personal protective equipment, the use of applicators and the presentation of the product in a form designed to reduce operator exposure to an acceptable level. (3) In view of the risks identified for terrestrial non-target species, appropriate risk reduction measures must be applied. These include, amongst others, the non-treatment of areas where other burrowing mammals than the target species are present.]
[F25			830 g/kg	1 February 2012	31 January 2014	31 January 2022	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the Union level risk assessment. In particular, where relevant, Member States shall assess outdoor use. When granting product authorisation, Member States shall ensure that adequate residue trials are provided to allow consumer risk assessment and that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall only be supplied to and used by specifically trained professionals in the form of ready-for-use products. (2) In view of the risks identified for operators, appropriate risk mitigation measures must be applied. Those include, amongst others, the use of appropriate personal and respiratory protective equipment, the use of applicators and the presentation of the product in a form designed to reduce the exposure of operators to an acceptable level. For indoor use, those include also the protection of operators and workers during fumigation, the protection of workers at re-entry (after fumigation period) and the protection of bystanders against leaking of gas. (3) For products containing aluminium phosphide that may lead to residues in food or feed, labels and/or safety data sheets for authorised products must contain instructions for use, such as the adherence to waiting periods, which ensure compliance with the provisions laid down in Article 18 of Regulation (EC) No 396/2005 of the European Parliament and of the Council ( OJ L 70, 16.3.2005, p. 1 ).]
[F26 21	fenpropimorph	(+/-)-cis-4-[3-(p-tert-butylphenyl)-2-methylpropyl]-2,6-dimethylmorpholine EC No: 266-719-9 CAS No: 67564-91-4	930 g/kg	1 July 2011	30 June 2013	30 June 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) In view of the assumptions made during the risk assessment, products authorised for industrial use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F27 22	boric acid	boric acid EC No: 233-139-2 CAS No: 10043-35-3	990 g/kg	1 September 2011	31 August 2013	31 August 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F28 23	boric oxide	Diboron trioxide EC No: 215-125-8 CAS No: 1303-86-2	975 g/kg	1 September 2011	31 August 2013	31 August 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F29 24	disodium tetraborate	disodium tetraborate EC No: 215-540-4 CAS No (anhydrous): 1330-43-4 CAS No (pentahydrate): 12267-73-1 CAS No (decahydrate): 1303-96-4	990 g/kg	1 September 2011	31 August 2013	31 August 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F30 25	disodium octaborate tetrahydrate	disodium octaborate tetrahydrate EC No: 234-541-0 CAS No: 12280-03-4	975 g/kg	1 September 2011	31 August 2013	31 August 2021	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) Products authorised for industrial and professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. In particular, labels and/or safety-data sheets of products authorised for industrial use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F31 26	Magnesium phosphide releasing phosphine	Trimagnesium diphosphide EC No: 235-023-7 CAS No: 12057-74-8	880 g/kg	1 February 2012	31 January 2014	31 January 2022	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the Union level risk assessment. In particular, where relevant, Member States shall assess outdoor use. When granting product authorisation, Member States shall ensure that adequate residue trials are provided to allow consumer risk assessment and that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall only be supplied to and used by specifically trained professionals in the form of ready-for-use products. (2) In view of the risks identified for operators, appropriate risk mitigation measures must be applied. Those include, amongst others, the use of appropriate personal and respiratory protective equipment, the use of applicators and the presentation of the product in a form designed to reduce the exposure of operators to an acceptable level. For indoor use, those include also the protection of operators and workers during fumigation, the protection of workers at re-entry (after fumigation period) and the protection of bystanders against leaking of gas. (3) For products containing magnesium phosphide that may lead to residues in food or feed, labels and/or safety data sheets for authorised products must contain instructions for use, such as the adherence to waiting periods, which ensure compliance with the provisions laid down in Article 18 of Regulation (EC) No 396/2005 of the European Parliament and of the Council ( OJ L 70, 16.3.2005, p. 1 ).]
[F32 27	Nitrogen	Nitrogen EC No: 231-783-9 CAS No: 7727-37-9	999 g/kg	1 September 2011	31 August 2013	31 August 2021	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Community level risk assessment. When granting product authorisation, Member States shall assess the risks and subsequently ensure that appropriate measures are taken or specific conditions imposed in order to mitigate the identified risks. Product authorisation can only be granted where the application demonstrates that risks can be reduced to acceptable levels. Member States shall ensure that authorisations are subject to the following conditions: (1) Products may only be sold to and used by professionals trained to use them. (2) Safe working practices and safe systems of work must be in place to ensure minimum risk, including the availability of personal protective equipment if necessary.]
[F33 28	Coumatetralyl	Coumatetralyl EC No: 227-424-0 CAS No: 5836-29-3	980 g/kg	1 July 2011	30 June 2013	30 June 2016	14	In view of the identified risks for non-target animals, the active substance shall be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in products other than tracking powder shall not exceed 375 mg/kg and only ready-for use products shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F34 29	tolylfluanid	Dichloro-N-[(dimethylamino)sulphonyl]fluoro-N-(p-tolyl)methanesulphenamide EC No: 211-986-9 CAS No: 731-27-1	960 g/kg	1 October 2011	30 September 2013	30 September 2021	8	Products shall not be authorised for the in situ treatment of wood outdoors or for wood that will be exposed to weathering. Member States shall ensure that authorisations are subject to the following conditions: (1) In view of the assumptions made during the risk assessment, products authorised for industrial or professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial or professional users can be reduced to an acceptable level by other means. (2) In view of the risks identified for the soil and aquatic compartments, appropriate risk mitigation measures must be taken to protect those compartments. In particular, labels and/or safety-data sheets of products authorised for industrial or professional use shall indicate that freshly treated timber must be stored after treatment under shelter and/or on impermeable hard standing to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F35 30	Acrolein	Acrylaldehyde EC No: 203-453-4 CAS No: 107-02-8	913 g/kg	1 September 2010	Not applicable	31 August 2020	12	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, the populations that may be exposed to the product and the use or exposure scenarios that have not been representatively addressed at the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) Waste waters containing acrolein shall be monitored prior to discharge, unless it can be demonstrated that risks for the environment can be reduced by other means. Where necessary in view of the risks to marine environment, waste waters shall be held in suitable tanks or reservoirs or appropriately treated before discharge. (2) Products authorised for industrial and/or professional use shall be used with appropriate personal protective equipment, and safe operational procedures shall be established, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by others means.]
[F36 31	Flocoumafen	4-hydroxy-3-[(1 RS ,3 RS ;1 RS ,3 RS )-1,2,3,4-tetrahydro-3-[4-(4-trifluoromethylbenzyloxy)phenyl]-1-naphthyl]coumarin EC No 421-960-0 CAS No 90035-08-8	955 g/kg	1 October 2011	30 September 2013	30 September 2016	14	In view of the fact that the active substance characteristics render it potentially persistent, liable to bioaccumulate and toxic, or very persistent and very liable to bioaccumulate, the active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) The nominal concentration of the active substance in products shall not exceed 50 mg/kg and only ready-for-use products shall be authorised. (2) Products shall contain an aversive agent and, where appropriate, a dye. (3) Products shall not be used as tracking powder. (4) Primary as well as secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. Those include, amongst others, the restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F37 32	Warfarin	(RS)-4-hydroxy-3-(3-oxo-1-phenylbutyl)coumarin EC No: 201-377-6 CAS No: 81-81-2	990 g/kg	1 February 2012	31 January 2014	31 January 2017	14	The active substance shall be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) the nominal concentration of the active substance shall not exceed 790 mg/kg and only ready-for-use products shall be authorised; (2) products shall contain an aversive agent and, where appropriate, a dye; (3) primary and secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the possibility of restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F38 33	Warfarin sodium	Sodium 2-oxo-3-(3-oxo-1-phenylbutyl)chromen-4-olate EC No: 204-929-4 CAS No: 129-06-6	910 g/kg	1 February 2012	31 January 2014	31 January 2017	14	The active substance shall be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) of Directive 98/8/EC before its inclusion in this Annex is renewed. Member States shall ensure that authorisations are subject to the following conditions: (1) the nominal concentration of the active substance shall not exceed 790 mg/kg and only ready-for-use products shall be authorised; (2) products shall contain an aversive agent and, where appropriate, a dye; (3) primary and secondary exposure of humans, non-target animals and the environment are minimised, by considering and applying all appropriate and available risk mitigation measures. These include, amongst others, the possibility of restriction to professional use only, setting an upper limit to the package size and laying down obligations to use tamper resistant and secured bait boxes.]
[F39 34	Dazomet	Tetrahydro-3,5-dimethyl-1,3,5-thiadiazine-2-thione EC No: 208-576-7 CAS No: 533-74-4	960 g/kg	1 August 2012	31 July 2014	31 July 2022	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the EU level risk assessment. In particular, where relevant, Member States shall assess any other use than professional use outdoors for the remedial treatment of wooden poles by insertion of granules. Member States shall ensure that authorisations are subject to the following condition: Products authorised for industrial and/or professional use shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial and/or professional users can be reduced to an acceptable level by others means.]
[F40 35	N,N-diethyl-meta-toluamide	N,N-diethyl-m-toluamide EC No: 205-149-7 CAS No: 134-62-3	970 g/kg	1 August 2012	31 July 2014	31 July 2022	19	Member States shall ensure that authorisations are subject to the following conditions: (1) primary exposure of humans shall be minimized by considering and applying appropriate risk mitigation measures, including, where applicable, instructions for the amount and frequency of application of the product on human skin; (2) labels on products intended for application on human skin, hair or clothing shall indicate that the product is intended only for restricted use on children between two and twelve years old, and that it is not intended for use on children less than two years old, unless it can be demonstrated in the application for product authorisation that the product will meet the requirements of Article 5 and Annex VI without such measures; (3) products must contain deterrents for ingestion.]
[F41 36	Metofluthrin	RTZ isomer: 2,3,5,6-tetrafluoro-4-(methoxymethyl)benzyl-(1R,3R)-2,2-dimethyl-3-(Z)-(prop-1-enyl)cyclopropanecarboxylate EC No: n.a. CAS No: 240494-71-7 Sum of all isomers: 2,3,5,6-tetrafluoro-4-(methoxymethyl)benzyl (EZ)-(1RS,3RS;1SR,3SR)-2,2-dimethyl-3-prop-1-enylcyclopropanecarboxylate EC No: n.a. CAS No: 240494-70-6	The active substance shall comply with both the following minimum purities: RTZ isomer: 754 g/kg Sum of all isomers: 930 g/kg	1 May 2011	Not applicable	30 April 2021	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the European level risk assessment.]
[F42 37	Spinosad	EC No: 434-300-1 CAS No: 168316-95-8 Spinosad is a mixture of 50-95 % spinosyn A and 5-50 % spinosyn D. Spinosyn A (2R,3aS,5aR,5bS,9S,13S,14R,16aS,16bR)-2-[(6-deoxy-2,3,4-tri-O-methyl-α-L-mannopyranosyl)oxy]-13-[[(2R,5S,6R)-5-(dimethylamino)tetrahydro-6-methyl-2H-pyran-2-yl]oxy]-9-ethyl-2,3,3a,5a,5b,6,9,10,11,12,13,14,16a,16b-tetradecahydro-14-methyl-1H-as-indaceno[3,2-d]oxacyclododecin-7,15-dione CAS No: 131929-60-7 Spinosyn D (2S,3aR,5aS,5bS,9S,13S,14R,16aS,16bS)-2-[(6-deoxy-2,3,4-tri-O-methyl-α-L-mannopyranosyl)oxy]-13-[[(2R,5S,6R)-5-(dimethylamino)tetrahydro-6-methyl-2H-pyran-2-yl]oxy]-9-ethyl-2,3,3a,5a,5b,6,9,10,11,12,13,14,16a,16b-tetradecahydro-4,14-dimethyl-1H-as-indaceno[3,2-d]oxacyclododecin-7,15-dione CAS No: 131929-63-0	850 g/kg	1 November 2012	31 October 2014	31 October 2022	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to compartments and populations that have not been representatively addressed in the EU level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: Authorisations shall be subject to appropriate risk mitigation measures. In particular, products authorised for professional use by spraying shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to professional users can be reduced to an acceptable level by others means. For products containing spinosad that may lead to residues in food or feed, Member States shall verify the need to set new and/or amended existing maximum residue levels (MRLs) according to Regulation (EC) No 470/2009 and/or Regulation (EC) No 396/2005, and take any appropriate risk mitigation measures ensuring that the applicable MRLs are not exceeded.]
[F43 38	Bifenthrin	IUPAC name: 2-methylbiphenyl-3-ylmethyl (1RS)-cis-3-[(Z)-2-chloro-3,3,3-trifluoroprop-1-enyl]-2,2-dimethylcyclopropanecarboxylate EC No: n.a. CAS No: 82657-04-3	911 g/kg	1 February 2013	31 January 2015	31 January 2023	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to environmental compartments and populations that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: Products shall be authorised only for industrial or professional use, unless it is demonstrated in the application for product authorisation that risks to non-professional users can be reduced to acceptable levels in accordance with Article 5 and Annex VI. Products authorised for industrial or professional use must be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial or professional users can be reduced to an acceptable level by other means. Appropriate risk mitigation measures shall be taken to protect the soil and aquatic compartments. In particular, labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hardstanding, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. Products shall not be authorised for the in situ treatment of wood outdoors, or for treatment of wood that will be either continually exposed to the weather or protected from the weather but subject to frequent wetting, unless data have been submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F44 39	(Z,E)-tetradeca-9,12-dienyl acetate	(9Z,12E)-Tetradeca-9,12-dien-1-yl acetate EC No: n.a. CAS No: 30507-70-1	977 g/kg	1 February 2013	31 January 2015	31 January 2023	19	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to environmental compartments and populations that have not been representatively addressed in Union level risk assessment. Member States shall ensure that authorisations are subject to the following condition: Labels for biocidal products containing (Z,E)-tetradeca-9,12-dienyl acetate shall indicate that those products shall not be used in spaces where un-packaged food or feed is kept.]
[F45 40	Fenoxycarb	IUPAC name: Ethyl [2-(4-phenoxyphenoxy)ethyl]carbamate EC No: 276-696-7 CAS No: 72490-01-8	960 g/kg	1 February 2013	31 January 2015	31 January 2023	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to environmental compartments and populations that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: Appropriate risk mitigation measures shall be taken to protect the soil and aquatic compartments. In particular, labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hardstanding under roof, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. Products shall not be authorised for treatment of wood that will be used in outdoor constructions near or above water, unless data is submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F46 41	Nonanoic acid, Pelargonic acid	IUPAC name: Nonanoic acid EC No: 203-931-2 CAS No: 112-05-0	896 g/kg	1 February 2013	31 January 2015	31 January 2023	19	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to environmental compartments and populations that have not been representatively addressed in Union level risk assessment.]
[F47 42	imidacloprid	(2E)-1-[(6-chloropyridin-3-yl)methyl]-N-nitroimidazolidin-2-imine EC No: 428-040-8 CAS No: 138261-41-3	970 g/kg	1 July 2013	30 June 2015	30 June 2023	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products shall not be authorised for uses in animal housings where emission to a sewage treatment plant or direct emission to surface water cannot be prevented, unless data is submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Authorisations shall be subject to appropriate risk mitigation measures. In particular, appropriate risk mitigation measures shall be taken to minimise the potential exposure of infants and children. For products containing imidacloprid that may lead to residues in food or feed, Member States shall verify the need to set new or amended existing maximum residue levels (MRLs) according to Regulation (EC) No 470/2009 or Regulation (EC) No 396/2005, and take any appropriate risk mitigation measures ensuring that the applicable MRLs are not exceeded.]
[F48 43	Abamectin	Abamectin is a mixture of avermectin B 1a and avermectin B 1b Abamectin: IUPAC name: n.a. EC No: n.a. CAS No: 71751-41-2 Avermectin B 1a : IUPAC name: (10E,14E,16E,22Z)-(1R,4S,5'S,6S,6'R,8R,12S,13S,20R,21R,24S)-6'-[(S)-secbutyl]-21,24-dihydroxy-5',11,13,22-tetramethyl-2-oxo-3,7,19-trioxatetracyclo[15.6.1.1 4,8 .0 20,24 ]pentacosa-10,14,16,22-tetraene-6-spiro-2'-(5',6'-dihydro-2'H-pyran)-12-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabinohexopyranoside EC No: 265-610-3 CAS No: 65195-55-3 Avermectin B 1b : IUPAC name: (10E,14E,16E,22Z)-(1R,4S,5'S,6S,6'R,8R,12S,13S,20R,21R,24S)-21,24-dihydroxy-6'-isopropyl-5',11,13,22-tetramethyl-2-oxo-3,7,19-trioxatetracyclo[15.6.1.1 4,8 .0 20,24 ]pentacosa-10,14,16,22-tetraene-6-spiro-2'-(5',6'-dihydro-2'H-pyran)-12-yl 2,6-dideoxy-4-O-(2,6-dideoxy-3-O-methyl-α-L-arabino-hexopyranosyl)-3-O-methyl-α-L-arabinohexopyranoside EC No: 265-611-9 CAS No: 65195-56-4	The active substance shall comply with all the following purities: Abamectin: minimum 900 g/kg Avermectin B 1a : minimum 830 g/kg Avermectin B 1b : maximum 80 g/kg	1 July 2013	30 June 2015	30 June 2023	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products applied in such a way that emission to a sewage treatment plant cannot be prevented shall not be authorised for those application rates for which the Union level risk assessment showed unacceptable risks, unless data are submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Authorisations shall be subject to appropriate risk mitigation measures. In particular, appropriate risk mitigation measures shall be taken to minimise the potential exposure of infants and children.]
[F49 44	4,5-Dichloro-2-octyl-2H-isothiazol-3-one	4,5-Dichloro-2-octylisothiazol-3(2 H )-one EC No: 264-843-8 CAS No: 64359-81-5	950 g/kg	1 July 2013	30 June 2015	30 June 2023	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, when relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products shall not be authorised for treatment of wood that will be continually exposed to the weather, protected from the weather but subject to frequent wetting or in contact with fresh water, unless data have been submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Member States shall ensure that authorisations are subject to the following conditions: (1) for products authorised for industrial or professional use, safe operational procedures shall be established, and products shall be used with appropriate personal protective equipment unless it can be demonstrated in the application for product authorisation that risks to industrial or professional users can be reduced to an acceptable level by other means; (2) labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing under roof, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal.]
[F3 45	Creosote	Creosote EC No: 232-287-5 CAS No: 8001-58-9	Grade B or Grade C creosote as specified in European Standard EN 13991:2003	1 May 2013	30 April 2015	30 April 2018	8	Biocidal products containing creosote may only be authorised for uses where the authorising Member State, based on an analysis regarding the technical and economic feasibility of substitution which it shall request from the applicant, as well as on any other information available to it, concludes that no appropriate alternatives are available. Those Member States authorising such products in their territory shall no later than 31 July 2016 submit a report to the Commission justifying their conclusion that there are no appropriate alternatives and indicating how the development of alternatives is promoted. The Commission will make these reports publicly available. The active substance is to be subject to a comparative risk assessment in accordance with the second subparagraph of Article 10(5)(i) before its inclusion in this Annex is renewed. When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to environmental compartments and populations that have not been representatively addressed at the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) Creosote may only be used under the conditions mentioned in point 2 of the second column of entry No 31 in Annex XVII to Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC b . (2) Creosote shall not be used for the treatment of wood intended for those uses referred to in point 3 of the second column of entry No 31 in Annex XVII to Regulation (EC) No 1907/2006. (3) Appropriate risk mitigation measures shall be taken to protect workers, including down-stream users, from exposure during treatment and handling of treated wood in compliance with Regulation (EC) No 1907/2006 and Directive 2004/37/EC of the European Parliament and of the Council of 29 April 2004 on the protection of workers from the risks related to exposure to carcinogens or mutagens at work (Sixth individual Directive within the meaning of Article 16(1) of Council Directive 89/391/EEC) c . (4) Appropriate risk mitigation measures shall be taken to protect the soil and aquatic compartments. In particular, labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber must be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water and that any losses must be collected for reuse or disposal.]
[F50 46	Bacillus thuringiensis subsp. israelensis Serotype H14, Strain AM65-52	Not applicable	No relevant impurities	1 October 2013	30 September 2015	30 September 2023	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products authorised for professional use shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to professional users can be reduced to an acceptable level by other means. For products containing Bacillus thuringiensis subsp. israelensis Serotype H14, Strain AM65-52 that may lead to residues in food or feed, Member States shall verify the need to set new or to amend existing maximum residue levels (MRLs) according to Regulation (EC) No 470/2009 or Regulation (EC) No 396/2005, and take any appropriate risk mitigation measures ensuring that the applicable MRLs are not exceeded.]
[F51 47	fipronil	(±)-5-amino-1-(2,6-dichloro-α,α,α,-trifluoro-p-tolyl)-4-trifluoromethylsulfinylpyrazole-3-carbonitrile (1:1) EC No: 424-610-5 CAS No: 120068-37-3	950 g/kg	1 October 2013	30 September 2015	30 September 2023	18	Only professional use indoors by application in locations normally inaccessible after application to man and domestic animals has been addressed in the Union level risk assessment. When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment.]
[F52 48	lambda-cyhalothrin	Reaction mass of (R)-α-cyano-3-phenoxybenzyl (1S,3S)-3-[(Z)-2-chloro-3,3,3-trifluoropropenyl]-2,2-dimethylcyclopropanecarboxylate and (S)-α-cyano-3-phenoxybenzyl (1R,3R)-3-[(Z)-2-chloro-3,3,3-trifluoropropenyl]-2,2-dimethylcyclopropanecarboxylate (1:1) CAS-No: 91465-08-6 EC No: 415-130-7	900 g/kg	1 October 2013	30 September 2015	30 September 2023	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products applied in such a way that emission to a sewage treatment plant cannot be prevented shall not be authorised, unless data are submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Products authorised for professional use shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to professional users can be reduced to an acceptable level by other means. For products containing lambda-cyhalothrin that may lead to residues in food or feed, Member States shall verify the need to set new or to amend existing maximum residue levels (MRLs) according to Regulation (EC) No 470/2009 or Regulation (EC) No 396/2005, and take any appropriate risk mitigation measures ensuring that the applicable MRLs are not exceeded.]
[F53 49	deltamethrin	(S)-α-cyano-3-phenoxybenzyl (1R,3R)-3-(2,2-dibromovinyl)-2,2-dimethylcyclopropane carboxylate CAS-No: 52918-63-5 EC No: 258-256-6	985 g/kg	1 October 2013	30 September 2015	30 September 2023	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Products shall not be authorised for indoor treatments resulting in sewage treatment plant emissions of the scale for which the Union level risk assessment showed unacceptable risks, unless data are submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures.]
[F54 50	Copper hydroxide	Copper (II) hydroxide EC No: 243-815-9 CAS No: 20427-59-2	965  g/kg	1 February 2014	31 January 2016	31 January 2024	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall not be authorised for application by dipping, unless data have been submitted in the application for product authorisation demonstrating that that application meets the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. (2) For products authorised for industrial use, safe operational procedures shall be established, and products shall be used with appropriate personal protective equipment unless it can be demonstrated in the application for product authorisation that risks to industrial users can be reduced to an acceptable level by other means. (3) Labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. (4) Products shall not be authorised for treatment of wood that will be used in outdoor constructions near or above water, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate mitigation measures.
51	Copper (II) oxide	Copper (II) oxide EC No: 215-269-1 CAS No: 1317-38-0	976  g/kg	1 February 2014	31 January 2016	31 January 2024	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) For products authorised for industrial use, safe operational procedures shall be established, and products shall be used with appropriate personal protective equipment unless it can be demonstrated in the application for product authorisation that risks to industrial users can be reduced to an acceptable level by other means. (2) Labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. (3) Products shall not be authorised for treatment of wood that will be used in outdoor constructions near or above water or for the treatment of wood in contact with fresh water, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate mitigation measures.
52	Basic copper carbonate	Copper(II) carbonate-copper(II) hydroxide (1:1) EC No: 235-113-6 CAS No: 12069-69-1	957  g/kg	1 February 2014	31 January 2016	31 January 2024	8	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: (1) Products shall not be authorised for application by dipping, unless data have been submitted in the application for product authorisation demonstrating that that application meets the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. (2) For products authorised for industrial use, safe operational procedures shall be established, and products shall be used with appropriate personal protective equipment unless it can be demonstrated in the application for product authorisation that risks to industrial users can be reduced to an acceptable level by other means. (3) Labels and, where provided, safety data sheets of products authorised shall indicate that freshly treated timber shall be stored after treatment under shelter or on impermeable hard standing, or both, to prevent direct losses to soil or water, and that any losses from the application of the product shall be collected for reuse or disposal. (4) Products shall not be authorised for treatment of wood that will be used in outdoor constructions near or above water, or for the treatment of wood in direct contact with fresh water, unless data is submitted to demonstrate that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate mitigation measures.]
[F55 53	bendiocarb	2,2-dimethyl-1,3-benzodioxol-4-yl methylcarbamate CAS-No: 22781-23-3 EC No: 245-216-8	970  g/kg	1 February 2014	31 January 2016	31 January 2024	18	The Union level risk assessment did not address all potential uses, but concerned, for example, application by professionals only, and excluded contact with feed or food and direct application on soil. When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to the following conditions: Products shall not be used for the treatment of surfaces that are prone to frequent wet cleaning, other than crack and crevice or spot treatment, unless data are submitted demonstrating that the product will meet the requirements of Article 5 and Annex VI, if necessary by the application of appropriate risk mitigation measures. Products authorised for industrial or professional use shall be used with appropriate personal protective equipment, unless it can be demonstrated in the application for product authorisation that risks to industrial or professional users can be reduced to an acceptable level by other means. Where relevant, measures shall be taken to prevent foraging bees from gaining access to treated nests by removing the combs or blocking the nest entrances.]
[F56 54	methyl nonyl ketone	Undecan-2-one CAS No: 112-12-9 EC No: 203-937-5	975  g/kg	1 May 2014	30 April 2016	30 April 2024	19	The Union level risk assessment was based on indoor use by non-professional users. When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment.]
[F57 55	margosa extract	IUPAC name: Not applicable CAS-No: 84696-25-3 EC No: 283-644-7 Description: margosa extract from the kernels of Azadirachta indica extracted with water and further processed with organic solvents	1 000  g/kg	1 May 2014	30 April 2016	30 April 2024	18	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations are subject to appropriate risk mitigation measures for the protection of surface water, sediment and non-target arthropods.]
[F58 56	Hydrochloric acid	Hydrochloric acid CAS No: not applicable EC No: 231-595-7	999  g/kg	1 May 2014	30 April 2016	30 April 2024	2	When assessing the application for authorisation of a product in accordance with Article 5 and Annex VI, Member States shall assess, where relevant for the particular product, those uses or exposure scenarios and those risks to human populations and to environmental compartments that have not been representatively addressed in the Union level risk assessment. Member States shall ensure that authorisations of products for non-professional use are subject to the packaging being designed to minimise user exposure, unless it can be demonstrated in the application for product authorisation that risks for human health can be reduced to acceptable levels by other means.]

Textual Amendments

F1 Inserted by Commission Directive 2006/140/EC of 20 December 2006 amending Directive 98/8/EC of the European Parliament and of the Council to include sulfuryl fluoride as an active substance in Annex I thereto (Text with EEA relevance).

F2 Substituted by Commission Directive 2007/69/EC of 29 November 2007 amending Directive 98/8/EC of the European Parliament and of the Council to include difethialone as an active substance in Annex I thereto (Text with EEA relevance).

F3 Inserted by Commission Directive 2011/71/EU of 26 July 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include creosote as an active substance in Annex I thereto (Text with EEA relevance).

F4 Inserted by Commission Directive 2009/84/EC of 28 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include sulfuryl fluoride as an active substance in Annex I thereto (Text with EEA relevance).

F5 Inserted by Commission Directive 2007/20/EC of 3 April 2007 amending Directive 98/8/EC of the European Parliament and of the Council to include dichlofluanid as an active substance in Annex I thereto (Text with EEA relevance).

F6 Inserted by Commission Directive 2008/15/EC of 15 February 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include clothianidin as an active substance in Annex I thereto (Text with EEA relevance).

F7 Inserted by Commission Directive 2007/69/EC of 29 November 2007 amending Directive 98/8/EC of the European Parliament and of the Council to include difethialone as an active substance in Annex I thereto (Text with EEA relevance).

F8 Inserted by Commission Directive 2008/16/EC of 15 February 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include etofenprox as an active substance in Annex I thereto (Text with EEA relevance).

F9 Inserted by Commission Directive 2008/86/EC of 5 September 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include tebuconazole as an active substance in Annex I thereto (Text with EEA relevance).

F10 Inserted by Commission Directive 2008/75/EC of 24 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include carbon dioxide as an active substance in Annex I thereto (Text with EEA relevance).

F11 Inserted by Commission Directive 2010/74/EU of 9 November 2010 amending Directive 98/8/EC of the European Parliament and of the Council to extend the inclusion in Annex I thereto of the active substance carbon dioxide to product type 18 (Text with EEA relevance).

F12 Inserted by Commission Directive 2008/78/EC of 25 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include propiconazole as an active substance in Annex I thereto (Text with EEA relevance).

F13 Inserted by Commission Directive 2008/81/EC of 29 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include difenacoum as an active substance in Annex I thereto (Text with EEA relevance).

F14 Inserted by Commission Directive 2008/80/EC of 28 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include cyclohexylhydroxydiazene 1-oxide, potassium salt (K-HDO) as an active substance in Annex I thereto (Text with EEA relevance).

F15 Inserted by Commission Directive 2008/79/EC of 28 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include IPBC as an active substance in Annex I thereto (Text with EEA relevance).

F16 Inserted by Commission Directive 2009/99/EC of 4 August 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include chlorophacinone as an active substance in Annex I thereto (Text with EEA relevance).

F17 Inserted by Commission Directive 2008/85/EC of 5 September 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include thiabendazole as an active substance in Annex I thereto (Text with EEA relevance).

F18 Inserted by Commission Directive 2008/77/EC of 25 July 2008 amending Directive 98/8/EC of the European Parliament and of the Council to include thiamethoxam as an active substance in Annex I thereto (Text with EEA relevance).

F19 Inserted by Commission Directive 2009/93/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include alphachloralose as an active substance in Annex I thereto (Text with EEA relevance).

F20 Inserted by Commission Directive 2010/10/EU of 9 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include brodifacoum as an active substance in Annex I thereto (Text with EEA relevance).

F21 Inserted by Commission Directive 2009/92/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include bromadiolone as an active substance in Annex I thereto (Text with EEA relevance).

F22 Inserted by Commission Directive 2009/88/EC of 30 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include thiacloprid as an active substance in Annex I thereto (Text with EEA relevance).

F23 Inserted by Commission Directive 2009/87/EC of 29 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include indoxacarb as an active substance in Annex I thereto (Text with EEA relevance).

F24 Inserted by Commission Directive 2009/95/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include aluminium phosphide releasing phosphine as an active substance in Annex I thereto (Text with EEA relevance).

F25 Inserted by Commission Directive 2010/9/EU of 9 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to extend the inclusion in Annex I thereto of the active substance aluminium phosphide releasing phosphine to product type 18 as defined in Annex V thereto (Text with EEA relevance).

F26 Inserted by Commission Directive 2009/86/EC of 29 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include fenpropimorph as an active substance in Annex I thereto (Text with EEA relevance).

F27 Inserted by Commission Directive 2009/94/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include boric acid as an active substance in Annex I thereto (Text with EEA relevance).

F28 Inserted by Commission Directive 2009/98/EC of 4 August 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include boric oxide as an active substance in Annex I thereto (Text with EEA relevance).

F29 Inserted by Commission Directive 2009/91/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include disodium tetraborate as an active substance in Annex I thereto (Text with EEA relevance).

F30 Inserted by Commission Directive 2009/96/EC of 31 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include disodium octaborate tetrahydrate as an active substance in Annex I thereto (Text with EEA relevance).

F31 Inserted by Commission Directive 2010/7/EU of 9 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include magnesium phosphide releasing phosphine as an active substance in Annex I thereto (Text with EEA relevance).

F32 Inserted by Commission Directive 2009/89/EC of 30 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include nitrogen as an active substance in Annex I thereto (Text with EEA relevance).

F33 Inserted by Commission Directive 2009/85/EC of 29 July 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include coumatetralyl as an active substance in Annex I thereto (Text with EEA relevance).

F34 Inserted by Commission Directive 2009/151/EC of 27 November 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include tolylfluanid as an active substance in Annex I thereto (Text with EEA relevance).

F35 Inserted by Commission Directive 2010/5/EU of 8 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include acrolein as an active substance in Annex I thereto (Text with EEA relevance).

F36 Inserted by Commission Directive 2009/150/EC of 27 November 2009 amending Directive 98/8/EC of the European Parliament and of the Council to include flocoumafen as an active substance in Annex I thereto (Text with EEA relevance).

F37 Inserted by Commission Directive 2010/11/EU of 9 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include warfarin as an active substance in Annex I thereto (Text with EEA relevance).

F38 Inserted by Commission Directive 2010/8/EU of 9 February 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include warfarin sodium as an active substance in Annex I thereto (Text with EEA relevance).

F39 Inserted by Commission Directive 2010/50/EU of 10 August 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include dazomet as an active substance in Annex I thereto (Text with EEA relevance).

F40 Inserted by Commission Directive 2010/51/EU of 11 August 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include N,N-diethyl-meta-toluamide as an active substance in Annex I thereto (Text with EEA relevance).

F41 Inserted by Commission Directive 2010/71/EU of 4 November 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include metofluthrin as an active substance in Annex I thereto (Text with EEA relevance).

F42 Inserted by Commission Directive 2010/72/EU of 4 November 2010 amending Directive 98/8/EC of the European Parliament and of the Council to include spinosad as an active substance in Annex I thereto (Text with EEA relevance).

F43 Inserted by Commission Directive 2011/10/EU of 8 February 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include bifenthrin as an active substance in Annex I thereto (Text with EEA relevance).

F44 Inserted by Commission Directive 2011/11/EU of 8 February 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include (Z,E)-tetradeca-9,12-dienyl acetate as an active substance in Annexes I and IA thereto (Text with EEA relevance).

F45 Inserted by Commission Directive 2011/12/EU of 8 February 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include fenoxycarb as an active substance in Annex I thereto (Text with EEA relevance).

F46 Inserted by Commission Directive 2011/13/EU of 8 February 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include nonanoic acid as an active substance in Annex I thereto (Text with EEA relevance).

F47 Inserted by Commission Directive 2011/69/EU of 1 July 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include imidacloprid as an active substance in Annex I thereto (Text with EEA relevance).

F48 Inserted by Commission Directive 2011/67/EU of 1 July 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include abamectin as an active substance in Annex I thereto (Text with EEA relevance).

F49 Inserted by Commission Directive 2011/66/EU of 1 July 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include 4,5-Dichloro-2-octyl-2H-isothiazol-3-one as an active substance in Annex I thereto (Text with EEA relevance).

F50 Inserted by Commission Directive 2011/78/EU of 20 September 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include Bacillus thuringiensis subsp. israelensis Serotype H14, Strain AM65-52 as an active substance in Annex I thereto (Text with EEA relevance).

F51 Inserted by Commission Directive 2011/79/EU of 20 September 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include fipronil as an active substance in Annex I thereto (Text with EEA relevance).

F52 Inserted by Commission Directive 2011/80/EU of 20 September 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include lambda-cyhalothrin as an active substance in Annex I thereto (Text with EEA relevance).

F53 Inserted by Commission Directive 2011/81/EU of 20 September 2011 amending Directive 98/8/EC of the European Parliament and of the Council to include deltamethrin as an active substance in Annex I thereto (Text with EEA relevance).

F54 Inserted by Commission Directive 2012/2/EU of 9 February 2012 amending Directive 98/8/EC of the European Parliament and of the Council to include copper (II) oxide, copper (II) hydroxide and basic copper carbonate as active substances in Annex I thereto (Text with EEA relevance).

F55 Inserted by Commission Directive 2012/3/EU of 9 February 2012 amending Directive 98/8/EC of the European Parliament and of the Council to include bendiocarb as an active substance in Annex I thereto (Text with EEA relevance).

F56 Inserted by Commission Directive 2012/14/EU of 8 May 2012 amending Directive 98/8/EC of the European Parliament and of the Council to include methyl nonyl ketone as an active substance in Annex I thereto (Text with EEA relevance).

F57 Inserted by Commission Directive 2012/15/EU of 8 May 2012 amending Directive 98/8/EC of the European Parliament and of the Council to include margosa extract as an active substance in Annex I thereto (Text with EEA relevance).

F58 Inserted by Commission Directive 2012/16/EU of 10 May 2012 amending Directive 98/8/EC of the European Parliament and of the Council to include hydrochloric acid as an active substance in Annex I thereto (Text with EEA relevance).