Directive 2002/24/EC of the European Parliament and of the Council (repealed)Dangos y teitl llawn

B. TYPE-APPROVAL MARK U.K.

1. The type-approval mark of a component or separate technical unit consists of: U.K.

1.1. a rectangle surrounding a lower case letter ‘e’, followed by the distinguishing number of the Member State which has issued type-approval, i.e.: U.K.

— 1

for Germany

— 3

for France

— 3

for Italy

— 4

for the Netherlands

— 5

for Sweden

— 6

for Belgium

[F1 — 7

for Hungary

— 8

for the Czech Republic]

— 9

for Spain

— 11

for the United Kingdom

— 12

for Austria

— 13

for Luxembourg

— 17

for Finland

— 18

for Denmark

[F2 — 19

for Romania]

[F1 — 20

for Poland]

— 21

for Portugal

— 23

for Greece

— 24

for Ireland[F3 .]

[F1 — 26

for Slovenia

— 27

for Slovakia

— 29

for Estonia

— 32

for Latvia

[F2 — 34

for Bulgaria]

— 36

for Lithuania

— [F4 49

for Cyprus]

— [F4 50

for Malta] .]

Textual Amendments

F1 Inserted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.

F2 Inserted by Council Directive 2006/96/EC of 20 November 2006 adapting certain Directives in the field of free movement of goods, by reason of the accession of Bulgaria and Romania.

F3 Deleted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.

F4 Substituted by Commission Directive 2005/30/EC of 22 April 2005 amending, for the purposes of their adaptation to technical progress, Directives 97/24/EC and 2002/24/EC of the European Parliament and of the Council, relating to the type-approval of two or three-wheel motor vehicles (Text with EEA relevance).

1.2. The four-digit number from Section 4 of the type-approval number, as given on the type-approval form completed for the separate technical unit or component concerned. The number is entered below and close to the rectangle referred to in 1.1. The figures making up the number are entered on the same side of the letter ‘e’ and face the same direction. In order to avoid any confusion with other symbols, Roman numerals must not be used in the type-approval number. U.K.

2. The type-approval mark is affixed to the separate technical unit or component in such a way as to be indelible and clearly legible, even when the separate technical unit or component is fitted to the vehicle. U.K.

3. An example of a type-approval mark is contained in the Appendix to this Annex. U.K.