- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (09/12/2005)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Directive 2002/72/EC (repealed)Dangos y teitl llawn
Commission Directive 2002/72/EC of 6 August 2002 relating to plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance) (repealed)
You are here:
Pa Fersiwn
Nodweddion Uwch
- Dangos Graddfa Ddaearyddol(e.e. Lloegr, Cymru, Yr Alban aca Gogledd Iwerddon)
- Dangos Llinell Amser Newidiadau
Rhagor o Adnoddau
PDF o Fersiynau Diwygiedig
- ddiwygiedig 01/05/20110.44 MB
- ddiwygiedig 09/11/20090.28 MB
- ddiwygiedig 27/03/20080.26 MB
- ddiwygiedig 20/04/20070.26 MB
- ddiwygiedig 09/12/20050.21 MB
- ddiwygiedig 30/03/20040.19 MB
- ddiwygiedig 02/02/20040.17 MB
- ddiwygiedig 04/09/20020.17 MB
Legislation originating from the EU
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Changes over time for: ANNEX II
Version Superseded: 20/04/2007
Status:
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
[X1ANNEX II U.K. LIST OF MONOMERS AND OTHER STARTING SUBSTANCES WHICH MAY BE USED IN THE MANUFACTURE OF PLASTIC MATERIALS AND ARTICLES
Editorial Information
GENERAL INTRODUCTION U.K.
1. This Annex contains the list of monomers or other starting substances. The list includes: U.K.
substances undergoing polymerisation, which includes polycondensation, polyaddition or any other similar process, to manufacture macromolecules,
natural or synthetic macromolecular substances used in the manufacture of modified macromolecules, if the monomers or the other starting substances required to synthesise them are not included in the list,
substances used to modify existing natural or synthetic macromolecular substances.
[F12. The following substances are not included even if they are intentionally used and are authorised: U.K.
(a)
salts (including double salts and acid salts) of aluminium, ammonium, calcium, iron, magnesium, potassium and sodium of authorised acids, phenols or alcohols. However, names containing ‘ … acid(s), salts ’ appear in the lists, if the corresponding free acid(s) is (are) not mentioned;
(b)
salts (including double salts and acid salts) of zinc of authorised acids, phenols or alcohols. For these salts a Group SML = 25 mg/kg (expressed as Zn) apply. The same restriction for Zn applies to:
(i)
substances whose name contains ‘ … acid(s), salts ’ which appear in the lists, if the corresponding free acid(s) is (are) not mentioned,
(ii)
substances referred to in note 38 of Annex VI.]
Textual Amendments
3. The list also does not include the following substances although they may be present: U.K.
(a)
substances which could be present in the finished product as:
impurities in the substances used,
reaction intermediates,
decomposition products;
(b)
oligomers and natural or synthetic macromolecular substances as well as their mixtures, if the monomers or starting substances required to synthesise them are included in the list;
(c)
mixtures of the authorised substances.
The materials and articles which contain the substances indicated under points (a), (b) and (c) shall comply with the requirements stated in Article 2 of Directive 89/109/EEC.
4. Substances shall be of good technical quality as regards the purity criteria. U.K.
5. The list contains the following information: U.K.
column 1 (Ref. No): the EEC packaging material reference number of the substances on the list,
column 2 (CAS No): the CAS (Chemical Abstracts Service) registry number,
column 3 (Name): the chemical name,
column 4 (Restrictions and/or specifications): These may include:
specific migration limit (SML),
maximum permitted quantity of the substance in the finished material or article (QM),
maximum permitted quantity of the substance in the finished material or article expressed as mg per 6 dm 2 of the surface in contact with foodstuffs (QMA),
any other restriction specifically mentioned,
any type of specifications related to the substance or to the polymer.
6. If a substance appearing on the list as an individual compound is also covered by a generic term, the restrictions applying to this substance shall be those indicated for the individual compound. U.K.
7. Where there is any inconsistency between the CAS number and the chemical name, the chemical name shall take precedence over the CAS number. If there is an inconsistency between the CAS number reported in EINECS and the CAS Registry, the CAS number in the CAS Registry shall apply. U.K.
8. A number of abbreviations or expressions are used in column 4 of the table, the meanings of which are as follows: U.K.
DL
=
Detection limit of the method of analysis;
FP
=
Finished material or article;
NCO
=
Isocyanate moiety;
ND
=
not detectable. For the purpose of this Directive ‘ not detectable ’ means that the substance should not be detected by a validated method of analysis which should detect it at the detection limit (DL) specified. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the detection limit may be used, pending the development of a validated method;
[F2QM
=
Maximum permitted quantity of the ‘ residual ’ substance in the material or article. For the purpose of this Directive the quantity of the substance in the material or article shall be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;]
QM(T)
=
Maximum permitted quantity of the ‘ residual ’ substance in the material or article expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the quantity of the substance in the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
QMA
=
Maximum permitted quantity of the ‘residual’ substance in the finished material or article expressed as mg per 6 dm 2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
QMA(T)
=
Maximum permitted quantity of the ‘residual’ substance in the material or article expressed as mg of total of moiety or substance(s) indicated per 6 dm 2 of the surface in contact with foodstuffs. For the purpose of this Directive the quantity of the substance in the surface of the material or article should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
SML
=
Specific migration limit in food or in food simulant, unless it is specified otherwise. For the purpose of this Directive the specific migration of the substance should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method;
SML(T)
=
Specific migration limit in food or in food simulant expressed as total of moiety or substance(s) indicated. For the purpose of this Directive the specific migration of the substances should be determined by a validated method of analysis. If such a method does not currently exist, an analytical method with appropriate performance characteristics at the specified limit may be used, pending the development of a validated method.
Textual Amendments
Section A U.K.
List of authorised monomers and other starting substances
| Ref. No. | CAS No | Name | Restrictions and/or specifications |
|---|---|---|---|
| (1) | (2) | (3) | (4) |
| 10030 | 000514-10-3 | Abietic acid | |
| 10060 | 000075-07-0 | Acetaldehyde | SML(T) = 6 mg/kg ( 2 ) |
| 10090 | 000064-19-7 | Acetic acid | |
| 10120 | 000108-05-4 | Acetic acid, vinyl ester | SML = 12 mg/kg |
| 10150 | 000108-24-7 | Acetic anhydride | |
| 10210 | 000074-86-2 | Acetylene | |
| [F310599/90A | 061788-89-4 | Acids, fatty, unsaturated (C 18 ), dimers, distilled | QMA(T) = 0,05 mg/6 dm 2 ( 27 ) |
| 10599/91 | 061788-89-4 | Acids, fatty, unsaturated (C 18 ), dimers, non distilled | QMA(T) = 0,05 mg/6 dm 2 ( 27 ) |
| 10599/92A | 068783-41-5 | Acids, fatty, unsaturated (C 18 ), dimers, hydrogenated, distilled | QMA(T) = 0,05 mg/6 dm 2 ( 27 ) |
| 10599/93 | 068783-41-5 | Acids, fatty, unsaturated (C 18 ), dimers, hydrogenated, non distilled | QMA(T) = 0,05 mg/6 dm 2 ( 27 )] |
| 10630 | 000079-06-1 | Acrylamide | SML = ND (DL = 0,01 mg/kg) |
| 10660 | 015214-89-8 | 2-Acrylamido-2-methylpropanesulphonic acid | SML = 0,05 mg/kg |
| 10690 | 000079-10-7 | Acrylic acid | [F4SML(T) = 6 mg/kg ( 36 )] |
| 10750 | 002495-35-4 | Acrylic acid, benzyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 10780 | 000141-32-2 | Acrylic acid, n-butyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 10810 | 002998-08-5 | Acrylic acid, sec-butyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 10840 | 001663-39-4 | Acrylic acid, tert-butyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| [ F5 ] | |||
| [F411005 | 012542-30-2 | Acrylic acid, dicyclopentenyl ester | QMA = 0,05 mg/6 dm 2] |
| 11245 | 002156-97-0 | Acrylic acid, dodecyl ester | SML = 0,05 mg/kg ( 1 ) |
| 11470 | 000140-88-5 | Acrylic acid, ethyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| [F411500 | 000103-11-7 | Acrylic acid, 2-ethylhexyl ester | SML = 0,05 mg/kg] |
| 11510 | 000818-61-1 | Acrylic acid, hydroxyethyl ester | See ‘ Acrylic acid, monoester with ethyleneglycol ’ |
| 11530 | [F200999-61-1] | Acrylic acid, 2-hydroxypropyl ester | [F2QMA = 0,05 mg/6 dm 2 for the sum of acrylic acid, 2-hydroxypropyl ester and acrylic acid, 2-hydroxyisopropyl ester and in compliance with the specifications laid down in Annex V] |
| 11590 | 000106-63-8 | Acrylic acid, isobutyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 11680 | 000689-12-3 | Acrylic acid, isopropyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 11710 | 000096-33-3 | Acrylic acid, methyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 11830 | 000818-61-1 | Acrylic acid, monoester with ethyleneglycol | [F4SML(T) = 6 mg/kg ( 36 )] |
| 11890 | 002499-59-4 | Acrylic acid, n-octyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 11980 | 000925-60-0 | Acrylic acid, propyl ester | [F4SML(T) = 6 mg/kg ( 36 )] |
| 12100 | 000107-13-1 | Acrylonitrile | SML = ND (DL= 0,020 mg/kg, analytical tolerance included) |
| 12130 | 000124-04-9 | Adipic acid | |
| 12265 | 004074-90-2 | Adipic acid, divinyl ester | QM = 5 mg/kg in FP. Or use only as comonomer |
| 12280 | 002035-75-8 | Adipic anhydride | |
| 12310 | Albumin | ||
| 12340 | Albumin, coagulated by formaldehyde | ||
| 12375 | Alcohols, aliphatic, monohydric, saturated, linear, primary (C 4 -C 22 ) | ||
| 12670 | 002855-13-2 | 1-Amino-3-aminomethyl-3,5,5-trimethylcyclohexane | SML = 6 mg/kg |
| 12761 | 000693-57-2 | 12-Aminododecanoic acid | SML= 0,05 mg/kg |
| 12763 | 000141-43-5 | 2-Aminoethanol | SML = 0,05 mg/kg. Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer |
| 12765 | 084434-12-8 | N-(2-Aminoethyl)-beta-alanine, sodium salt | SML= 0,05 mg/kg |
| [F412786 | 000919-30-2 | 3-Aminopropyltriethoxysilane | Residual extractable content of 3-aminopropyltriethoxysilane to be less than 3 mg/kg filler. To be used only for the reactive surface treatment of inorganic fillers] |
| 12788 | 002432-99-7 | 11-Aminoundecanoic acid | SML= 5 mg/kg |
| 12789 | 007664-41-7 | Ammonia | |
| 12820 | 000123-99-9 | Azelaic acid | |
| 12970 | 004196-95-6 | Azelaic anhydride | |
| 13000 | 001477-55-0 | 1,3-Benzenedimethanamine | SML= 0,05 mg/kg |
| 13060 | 004422-95-1 | 1,3,5-Benzenetricarboxylic acid trichloride | QMA = 0,05 mg/6 dm 2 (measured as 1,3,5-Benzenetricarboxylic acid) |
| 13075 | 000091-76-9 | Benzoguanamine | See ‘ 2,4-Diamino-6-phenyl-1,3,5-triazine ’ |
| 13090 | 000065-85-0 | Benzoic acid | |
| 13150 | 000100-51-6 | Benzyl alcohol | |
| 13180 | 000498-66-8 | Bicyclo[2.2.1]hept-2-ene (=Norbornene) | SML= 0,05 mg/kg |
| 13210 | 001761-71-3 | Bis(4-aminocyclohexyl)methane | SML= 0,05 mg/kg |
| [F413317 | 132459-54-2 | N,N′-Bis[4-(ethoxycarbonyl)phenyl]-1,4,5,8-naphthalenetetracarboxydiimide | SML = 0,05 mg/kg. Purity > 98,1 % (w/w). To be used only as co-monomer (max 4 %) for polyesters (PET, PBT)] |
| [F313323 | 000102-40-9 | 1,3-Bis(2-hydroxyethoxy)benzene | SML = 0,05 mg/kg] |
| 13326 | 000111-46-6 | Bis(2-hydroxyethyl)ether | See ‘ Diethyleneglycol ’ |
| 13380 | 000077-99-6 | 2,2-Bis(hydroxymethyl)-1-butanol | See ‘ 1,1,1-Trimethylolpropane ’ |
| 13390 | 000105-08-8 | 1,4-Bis(hydroxymethyl)cyclohexane | |
| 13395 | 004767-03-7 | 2,2-Bis(hydroxymethyl)propionic acid | QMA = 0,05 mg/6 dm 2 |
| 13480 | 000080-05-7 | 2,2-Bis(4-hydroxyphenyl)propane | [F2SML(T) = 0,6 mg/kg ( 28 )] |
| 13510 | 001675-54-3 | 2,2-Bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether (=BADGE) | According to Commission Directive 2002/16/EC of 20 February 2002 on the use of certain epoxy derivatives in materials and articles intended to come into contact with foodstuffs ( OJ L 51, 22.2.2002, p. 27 ) |
| 13530 | 038103-06-9 | 2,2-Bis(4-hydroxyphenyl)propane bis(phthalic anhydride) | SML = 0,05 mg/kg |
| 13550 | 000110-98-5 | Bis(hydroxypropyl) ether | See ‘ Dipropyleneglycol ’ |
| 13560 | 0005124-30-1 | Bis(4-isocyanatocyclohexyl)methane | See ‘ Dicyclohexylmethane-4,4′-diisocyanate ’ |
| 13600 | 047465-97-4 | 3,3-Bis(3-methyl-4-hydroxyphenyl)2-indolinone | SML = 1,8 mg/kg |
| 13607 | 000080-05-7 | Bisphenol A | See ‘ 2,2-Bis(4-hydroxyphenyl)propane ’ |
| 13610 | 001675-54-3 | Bisphenol A bis(2,3-epoxypropyl) ether | See ‘ 2,2-Bis(4-hydroxyphenyl)propane bis(2,3-epoxypropyl) ether ’ |
| 13614 | 038103-06-9 | Bisphenol A bis(phthalic anhydride) | See ‘ 2,2-Bis(4-hydroxyphenyl)propane bis(phthalic anhydride) ’ |
| 13617 | 000080-09-1 | Bisphenol S | See ‘ 4,4′-Dihydroxydiphenyl sulphone ’ |
| 13620 | 010043-35-3 | Boric acid | SML(T) = 6 mg/kg ( 23 ) (expressed as Boron) without prejudice to the provisions of Directive 98/83/EC on water for human consumption ( OJ L 330, 5.12.1998, p. 32 ). |
| 13630 | 000106-99-0 | Butadiene | QM = 1 mg/kg in FP or SML = not detectable (DL = 0,020 mg/kg, analytical tolerance included) |
| 13690 | 000107-88-0 | 1,3-Butanediol | |
| 13720 | 000110-63-4 | 1,4-Butanediol | [F1SML(T) = 5 mg/kg ( 24 )] |
| 13780 | 002425-79-8 | 1,4-Butanediol bis(2,3-epoxypropyl)ether | QM = 1 mg/kg in FP (expressed as Epoxy group, Mw = 43) |
| 13810 | 000505-65-7 | 1,4-Butanediol formal | QMA = 0,05 mg/6 dm 2 |
| 13840 | 000071-36-3 | 1-Butanol | |
| 13870 | 000106-98-9 | 1-Butene | |
| 13900 | 000107-01-7 | 2-Butene | |
| 13932 | 000598-32-3 | 3-Buten-2-ol | QMA = ND (DL = 0,02 mg/6 dm 2 ) To be used only as a comonomer for the preparation of polymeric additive |
| 14020 | 000098-54-4 | 4-tert-Butylphenol | SML = 0,05 mg/kg |
| 14110 | 000123-72-8 | Butyraldehyde | |
| 14140 | 000107-92-6 | Butyric acid | |
| 14170 | 000106-31-0 | Butyric anhydride | |
| 14200 | 000105-60-2 | Caprolactam | SML(T) = 15 mg/kg ( 5 ) |
| 14230 | 002123-24-2 | Caprolactam, sodium salt | SML(T) = 15 mg/kg ( 5 ) (expressed as Caprolactam) |
| [F414260 | 000502-44-3 | Caprolactone | SML = 0,05 mg/kg (expressed as the sum of caprolactone and 6-hydroxyhexanoic acid)] |
| 14320 | 000124-07-2 | Caprylic acid | |
| 14350 | 000630-08-0 | Carbon monoxide | |
| 14380 | 000075-44-5 | Carbonyl chloride | QM = 1 mg/kg in FP |
| 14411 | 008001-79-4 | Castor oil | |
| 14500 | 009004-34-6 | Cellulose | |
| 14530 | 007782-50-5 | Chlorine | |
| 14570 | 000106-89-8 | 1-Chloro-2,3-epoxypropane | See ‘ Epichlorohydrin ’ |
| 14650 | 000079-38-9 | Chlorotrifluoroethylene | QMA = 0,5 mg/6 dm 2 |
| 14680 | 000077-92-9 | Citric acid | |
| 14710 | 000108-39-4 | m -Cresol | |
| 14740 | 000095-48-7 | o -Cresol | |
| 14770 | 000106-44-5 | p -Cresol | |
| [F314800 | 003724-65-0 | Crotonic acid | QMA(T) = 0,05 mg/6 dm 2 ( 33 )] |
| 14841 | 000599-64-4 | 4-Cumylphenol | SML = 0,05 mg/kg |
| 14880 | 000105-08-8 | 1,4-Cyclohexanedimethanol | See ‘ 1,4-Bis(hydroxymethyl)cyclohexane ’ |
| 14950 | 003173-53-3 | Cyclohexyl isocyanate | [F2QM(T) = 1 mg/kg in FP (expressed as NCO) ( 26 )] |
| 15030 | 000931-88-4 | Cyclooctene | SML = 0,05 mg/kg. For use only in polymers contacting foods for which simulant A is laid down in Directive 85/572/EEC |
| 15070 | 001647-16-1 | 1,9-Decadiene | SML = 0,05 mg/kg |
| 15095 | 000334-48-5 | Decanoic acid | |
| 15100 | 000112-30-1 | 1-Decanol | |
| 15130 | 000872-05-9 | 1-Decene | SML = 0,05 mg/kg |
| 15250 | 000110-60-1 | 1,4-Diaminobutane | |
| 15272 | 000107-15-3 | 1,2-Diaminoethane | See ‘ Ethylenediamine ’ |
| 15274 | 000124-09-4 | 1,6-Diaminohexane | See ‘ Hexamethylenediamine ’ |
| 15310 | 000091-76-9 | 2,4-Diamino-6-phenyl-1,3,5-triazine | QMA = 5 mg/6 dm 2 |
| [ F6 | |||
| F6 ] | |||
| 15565 | 000106-46-7 | 1,4-Dichlorobenzene | SML = 12 mg/kg |
| 15610 | 000080-07-9 | 4,4′-Dichlorodiphenyl sulphone | SML = 0,05 mg/kg |
| 15700 | 005124-30-1 | Dicyclohexylmethane-4,4′-diisocyanate | QM(T) = 1 mg/kg (expressed as NCO ( 26 ) |
| 15760 | 000111-46-6 | Diethyleneglycol | SML(T) = 30 mg/kg ( 3 ) |
| 15790 | 000111-40-0 | Diethylenetriamine | SML = 5 mg/kg |
| 15820 | 000345-92-6 | 4,4′-Difluorobenzophenone | SML = 0,05 mg/kg |
| 15880 | 000120-80-9 | 1,2-Dihydroxybenzene | SML = 6 mg/kg |
| 15910 | 000108-46-3 | 1,3-Dihydroxybenzene | SML = 2,4 mg/kg |
| 15940 | 000123-31-9 | 1,4-Dihydroxybenzene | SML = 0,6 mg/kg |
| 15970 | 000611-99-4 | 4,4′-Dihydroxybenzophenone | SML(T) = 6 mg/kg ( 15 ) |
| 16000 | 000092-88-6 | 4,4′-Dihydroxybiphenyl | SML = 6 mg/kg |
| 16090 | 000080-09-1 | 4,4′-Dihydroxydiphenyl sulphone | SML = 0,05 mg/kg |
| 16150 | 000108-01-0 | Dimethylaminoethanol | SML = 18 mg/kg |
| [F316210 | 006864-37-5 | 3,3'-Dimethyl-4,4'-diaminodicyclohexylmethane | SML = 0,05 mg/kg ( 32 ). To be used only in polyamides.] |
| 16240 | 000091-97-4 | 3,3′-Dimethyl-4,4′-diisocyanatobiphenyl | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 16360 | 000576-26-1 | 2,6-Dimethylphenol | SML = 0,05 mg/kg |
| 16390 | 000126-30-7 | 2,2-Dimethyl-1,3-propanediol | SML = 0,05 mg/kg |
| 16450 | 000646-06-0 | 1,3-Dioxolane | SML = 0,05 mg/kg |
| 16480 | 000126-58-9 | Dipentaerythritol | |
| [F316540 | 000102-09-0 | Diphenyl carbonate | SML = 0,05 mg/kg] |
| 16570 | 004128-73-8 | Diphenylether-4,4′-diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 16600 | 005873-54-1 | Diphenylmethane-2,4′-diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 16630 | 000101-68-8 | Diphenylmethane-4,4′-diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 16650 | 000127-63-9 | Diphenyl sulphone | SML(T) = 3 mg/kg ( 25 ) |
| 16660 | 000110-98-5 | Dipropyleneglycol | |
| 16690 | 001321-74-0 | Divinylbenzene | QMA = 0,01 mg/6 dm 2 or SML = ND (DL = 0,02 mg/kg, analytical tolerance included) for the sum of divinylbenzene and ethylvinylbenzene and in compliance with the specifications laid down in Annex V |
| 16694 | 013811-50-2 | N,N′-Divinyl-2-imidazolidinone | QM = 5 mg/kg in FP |
| 16697 | 000693-23-2 | n-Dodecanedioic acid | |
| 16704 | 000112-41-4 | 1-Dodecene | SML = 0,05 mg/kg |
| 16750 | 000106-89-8 | Epichlorohydrin | QM = 1 mg/kg in FP |
| 16780 | 000064-17-5 | Ethanol | |
| 16950 | 000074-85-1 | Ethylene | |
| [F416955 | 000096-49-1 | Ethylene carbonate | Residual content = 5 mg/kg of hydrogel at a maximum ratio of 10 g of hydrogel to 1 kg of food. The hydrolysate contains ethyleneglycol having an SML = 30 mg/kg] |
| 16960 | 000107-15-3 | Ethylenediamine | SML = 12 mg/kg |
| 16990 | 000107-21-1 | Ethyleneglycol | SML(T) = 30 mg/kg ( 3 ) |
| 17005 | 000151-56-4 | Ethyleneneimine | SML = ND (DL = 0,01 mg/kg) |
| 17020 | 000075-21-8 | Ethylene oxide | QM = 1 mg/kg in FP |
| 17050 | 000104-76-7 | 2-Ethyl-1-hexanol | SML = 30 mg/kg |
| [F317110 | 016219-75-3 | 5-Ethylidenebicyclo[2,2,1]hept-2-ene | QMA = 0,05 mg/6 dm 2 . The ratio surface/quantity of food shall be lower than 2 dm 2 /kg] |
| 17160 | 000097-53-0 | Eugenol | SML = ND (DL = 0,02 mg/kg, analytical tolerance included) |
| 17170 | 061788-47-4 | Fatty acids, coco | |
| 17200 | 068308-53-2 | Fatty acids, soya | |
| 17230 | 061790-12-3 | Fatty acids, tall oil | |
| 17260 | 000050-00-0 | Formaldehyde | SML(T) = 15 mg/kg ( 22 ) |
| 17290 | 000110-17-8 | Fumaric acid | |
| 17530 | 000050-99-7 | Glucose | |
| 18010 | 000110-94-1 | Glutaric acid | |
| 18070 | 000108-55-4 | Glutaric anhydride | |
| 18100 | 000056-81-5 | Glycerol | |
| 18220 | 068564-88-5 | N-Heptylaminoundecanoic acid | SML = 0,05 mg/kg ( 1 ) |
| 18250 | 000115-28-6 | Hexachloroendomethylenetetrahydrophthalic acid | SML = ND (DL = 0,01 mg/kg) |
| 18280 | 000115-27-5 | Hexachloroendomethylenetetrahydrophthalic anhydride | SML = ND (DL = 0,01 mg/kg) |
| 18310 | 036653-82-4 | 1-Hexadecanol | |
| 18430 | 000116-15-4 | Hexafluoropropylene | SML = ND (DL = 0,01 mg/kg) |
| 18460 | 000124-09-4 | Hexamethylenediamine | SML = 2,4 mg/kg |
| 18640 | 000822-06-0 | Hexamethylene diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 18670 | 000100-97-0 | Hexamethylenetetramine | SML(T) = 15 mg/kg ( 22 ) (expressed as Formaldehyde) |
| [F318700 | 000629-11-8 | 1,6-Hexanediol | SML = 0,05 mg/kg] |
| 18820 | 000592-41-6 | 1-Hexene | SML = 3 mg/kg |
| 18867 | 000123-31-9 | Hydroquinone | See ‘ 1,4-Dihydroxybenzene ’ |
| 18880 | 000099-96-7 | p-Hydroxybenzoic acid | |
| [F318896 | 001679-51-2 | 4-(Hydroxymethyl)-1-cyclohexene | SML = 0,05 mg/kg] |
| 18897 | 016712-64-4 | 6-Hydroxy-2-naphthalenecarboxylic acid | SML = 0,05 mg/kg |
| 18898 | 000103-90-2 | N-(4-Hydroxyphenyl) acetamide | [F2SML = 0,05 mg/kg] |
| 19000 | 000115-11-7 | Isobutene | |
| 19060 | 000109-53-5 | Isobutyl vinyl ether | QM = 5 mg/kg in FP |
| 19110 | 004098-71-9 | 1-Isocyanato-3-isocyanatomethyl-3,5,5-trimethylcyclohexane | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 19150 | 000121-91-5 | Isophthalic acid | SML = 5 mg/kg |
| 19210 | 001459-93-4 | Isophthalic acid, dimethyl ester | SML = 0,05 mg/kg |
| 19243 | 000078-79-5 | Isoprene | See ‘ 2-Methyl-1,3-butadiene ’ |
| 19270 | 000097-65-4 | Itaconic acid | |
| 19460 | 000050-21-5 | Lactic acid | |
| 19470 | 000143-07-7 | Lauric acid | |
| 19480 | 002146-71-6 | Lauric acid, vinyl ester | |
| 19490 | 000947-04-6 | Laurolactam | SML = 5 mg/kg |
| 19510 | 011132-73-3 | Lignocellulose | |
| 19540 | 000110-16-7 | Maleic acid | SML(T) = 30 mg/kg ( 4 ) |
| 19960 | 000108-31-6 | Maleic anhydride | SML(T) = 30 mg/kg ( 4 ) (expressed as maleic acid) |
| 19975 | 000108-78-1 | Melamine | See ‘ 2,4,6-triamino-1,3,5-triazine ’ |
| 19990 | 000079-39-0 | Methacrylamide | SML = ND (DL = 0,02 mg/kg, analytical tolerance included) |
| 20020 | 000079-41-4 | Methacrylic acid | [F4SML(T) = 6 mg/kg ( 37 )] |
| 20050 | 000096-05-9 | Methacrylic acid, allyl ester | SML = 0,05 mg/kg |
| 20080 | 002495-37-6 | Methacrylic acid, benzyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 20110 | 000097-88-1 | Methacrylic acid, butyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 20140 | 002998-18-7 | Methacrylic acid, sec-butyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 20170 | 000585-07-9 | Methacrylic acid, tert-butyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 20260 | 000101-43-9 | Methacrylic acid, cyclohexyl ester | SML = 0,05 mg/kg |
| 20410 | 002082-81-7 | Methacrylic acid, diester with 1,4-butanediol | SML = 0,05 mg/kg |
| [F320440 | 000097-90-5 | Methacrylic acid, diester with ethyleneglycol | SML = 0,05 mg/kg] |
| 20530 | 002867-47-2 | Methacrylic acid, 2-(dimethylamino)-ethyl ester | SML = ND (DL = 0,02 mg/kg, analytical tolerance included) |
| 20590 | 000106-91-2 | Methacrylic acid, 2,3-epoxypropyl ester | QMA = 0,02 mg/6 dm 2 |
| 20890 | 000097-63-2 | Methacrylic acid, ethyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21010 | 000097-86-9 | Methacrylic acid, isobutyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21100 | 004655-34-9 | Methacrylic acid, isopropyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21130 | 000080-62-6 | Methacrylic acid, methyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21190 | 000868-77-9 | Methacrylic acid, monoester with ethyleneglycol | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21280 | 002177-70-0 | Methacrylic acid, phenyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21340 | 002210-28-8 | Methacrylic acid, propyl ester | [F4SML(T) = 6 mg/kg ( 37 )] |
| [F421370 | 010595-80-9 | Methacrylic acid, 2-sulphoethyl ester | QMA = ND (DL = 0,02 mg/6 dm 2 )] |
| [F321400 | 054276-35-6 | Methacrylic acid, sulphopropyl ester | QMA = 0,05 mg/6 dm 2] |
| 21460 | 000760-93-0 | Methacrylic anhydride | [F4SML(T) = 6 mg/kg ( 37 )] |
| 21490 | 000126-98-7 | Methacrylonitrile | SML = ND (DL = 0,020 mg/kg, analytical tolerance included) |
| 21520 | 001561-92-8 | Methallylsulphonic acid, sodium salt | SML = 5 mg/kg |
| 21550 | 000067-56-1 | Methanol | |
| 21640 | 000078-79-5 | 2-Methyl-1,3-butadiene | QM = 1 mg/kg in FP or SML = ND (DL = 0,02 mg/kg, analytical tolerance included) |
| 21730 | 000563-45-1 | 3-Methyl-1-butene | QMA = 0,006 mg/6 dm 2 . For use only in Polypropylene |
| 21765 | 106246-33-7 | 4,4′-Methylenebis(3-chloro-2,6-diethylaniline) | QMA = 0,05 mg/6 dm 2 |
| 21821 | 000505-65-7 | 1,4-(Methylenedioxy)butane | See ‘ 1,4-Butanediol formal ’ |
| 21940 | 000924-42-5 | N-Methylolacrylamide | SML = ND (DL = 0,01 mg/kg) |
| 22150 | 000691-37-2 | 4-Methyl-1-pentene | [F2SML = 0,05 mg/kg] |
| [F422210 | 000098-83-9 | alpha-Methylstyrene | SML = 0,05 mg/kg] |
| 22331 | 025513-64-8 | [F2Mixture of (35-45 % w/w) 1,6-diamino-2,2,4-trimethylhexane and (55-65 % w/w)1,6-diamino-2,4,4-trimethylhexane] | QMA = 5 mg/6 dm 2 |
| 22332 | [F2—] | Mixture of (40 % w/w) 2,2,4-trimethylhexane-1,6-diisocyanate and (60 % w/w) 2,4,4-trimethylhexane-1,6-diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 22350 | 000544-63-8 | Myristic acid | |
| 22360 | 001141-38-4 | 2,6-Naphthalenedicarboxylic acid | SML = 5 mg/kg |
| 22390 | 000840-65-3 | 2,6-Naphthalenedicarboxylic acid, dimethyl ester | SML = 0,05 mg/kg |
| 22420 | 003173-72-6 | 1,5-Naphthalene diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 22437 | 000126-30-7 | Neopentylglycol | See ‘ 2,2-Dimethyl-1,3-propanediol ’ |
| 22450 | 009004-70-0 | Nitrocellulose | |
| 22480 | 000143-08-8 | 1-Nonanol | |
| 22550 | 000498-66-8 | Norbornene | See ‘ Bicyclo[2.2.1]hept-2-ene ’ |
| 22570 | 000112-96-9 | Octadecyl isocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 22600 | 000111-87-5 | 1-Octanol | |
| 22660 | 000111-66-0 | 1-Octene | SML = 15 mg/kg |
| 22763 | 000112-80-1 | Oleic acid | |
| [F322775 | 000144-62-7 | Oxalic acid | SML(T) = 6 mg/kg ( 29 )] |
| 22778 | 007456-68-0 | 4,4′-Oxybis(benzenesulphonyl azide) | QMA = 0,05 mg/6 dm 2 |
| 22780 | 000057-10-3 | Palmitic acid | |
| 22840 | 000115-77-5 | Pentaerythritol | |
| 22870 | 000071-41-0 | 1-Pentanol | |
| 22900 | 000109-67-1 | 1-Pentene | SML = 5 mg/kg |
| [F422932 | 001187-93-5 | Perfluoromethyl perfluorovinyl ether | SML = 0,05 mg/kg. Only to be used for anti-stick coatings] |
| 22937 | 001623-05-8 | Perfluoropropylperfluorovinyl ether | SML = 0,05 mg/kg |
| 22960 | 000108-95-2 | Phenol | |
| 23050 | 000108-45-2 | 1,3-Phenylenediamine | SML = ND (DL = 0,02 mg/kg, analytical tolerance included) |
| [F323070 | 000102-39-6 | (1,3-Phenylenedioxy)diacetic acid | QMA = 0,05 mg/6 dm 2] |
| 23155 | 000075-44-5 | Phosgene | See ‘ Carbonyl chloride ’ |
| 23170 | 007664-38-2 | Phosphoric acid | |
| 23175 | 000122-52-1 | Phosphorous acid, triethyl ester | QM = ND (DL = 1 mg/kg in FP) |
| 23187 | Phthalic acid | See ‘ Terephthalic acid ’ | |
| 23200 | 000088-99-3 | o-Phthalic acid | |
| 23230 | 000131-17-9 | Phthalic acid, diallyl ester | SML = ND (DL = 0,01 mg/kg) |
| 23380 | 000085-44-9 | Phthalic anhydride | |
| 23470 | 000080-56-8 | alpha-Pinene | |
| 23500 | 000127-91-3 | beta-Pinene | |
| 23547 | 009016-00-6 063148-62-9 | Polydimethylsiloxane (Mw > 6 800 ) | In compliance with the specifications laid down in Annex V |
| 23590 | 025322-68-3 | Polyethyleneglycol | |
| 23651 | 025322-69-4 | Polypropyleneglycol | |
| 23740 | 000057-55-6 | 1,2-Propanediol | |
| 23770 | 000504-63-2 | 1,3-Propanediol | SML = 0,05 mg/kg |
| 23800 | 000071-23-8 | 1-Propanol | |
| 23830 | 000067-63-0 | 2-Propanol | |
| 23860 | 000123-38-6 | Propionaldehyde | |
| 23890 | 000079-09-4 | Propionic acid | |
| 23920 | 000105-38-4 | Propionic acid, vinyl ester | SML(T) = 6 mg/kg ( 2 ) (expressed as Acetaldehyde) |
| 23950 | 000123-62-6 | Propionic anhydride | |
| 23980 | 000115-07-1 | Propylene | |
| 24010 | 000075-56-9 | Propylene oxide | QM = 1 mg/kg in FP |
| 24051 | 000120-80-9 | Pyrocatechol | See ‘ 1,2-Dihydroxybenzene ’ |
| 24057 | 000089-32-7 | Pyromellitic anhydride | SML = 0,05 mg/kg (expressed as Pyromellitic acid) |
| 24070 | 073138-82-6 | Resin acids and Rosin acids | |
| 24072 | 000108-46-3 | Resorcinol | See ‘ 1,3-Dihydroxybenzene ’ |
| 24073 | 000101-90-6 | Resorcinol diglycidyl ether | QMA = 0,005 mg/6 dm 2 . Not for use in polymers contacting foods for which simulant D is laid down in Directive 85/572/EEC and for indirect food contact only, behind the PET layer. |
| 24100 | 008050-09-7 | Rosin | |
| 24130 | 008050-09-7 | Rosin gum | See ‘ Rosin ’ |
| 24160 | 008052-10-6 | Rosin tall oil | |
| 24190 | [F1008050-09-7] | Rosin wood | [F4See ‘ Rosin ’ (Reference No 24100)] |
| 24250 | 009006-04-6 | Rubber, natural | |
| 24270 | 000069-72-7 | Salicylic acid | |
| 24280 | 000111-20-6 | Sebacic acid | |
| 24430 | 002561-88-8 | Sebacic anhydride | |
| 24475 | 001313-82-2 | Sodium sulphide | |
| 24490 | 000050-70-4 | Sorbitol | |
| 24520 | 008001-22-7 | Soybean oil | |
| 24540 | 009005-25-8 | Starch, edible | |
| 24550 | 000057-11-4 | Stearic acid | |
| 24610 | 000100-42-5 | Styrene | |
| 24760 | 026914-43-2 | Styrenesuphonic acid | SML = 0,05 mg/kg |
| 24820 | 000110-15-6 | Succinic acid | |
| 24850 | 000108-30-5 | Succinic anhydride | |
| 24880 | 000057-50-1 | Sucrose | |
| 24887 | 006362-79-4 | 5-Sulphoisophthalic acid, monosodium salt | SML = 5 mg/kg |
| 24888 | 003965-55-7 | 5-Sulphoisophthalic acid, monosodium salt, dimethyl ester | SML = 0,05 mg/kg |
| [F424903 | 068425-17-2 | Syrups, hydrolysed starch, hydrogenated | In compliance with the specifications laid down in Annex V] |
| 24910 | 000100-21-0 | Terephthalic acid | SML = 7,5 mg/kg |
| 24940 | 000100-20-9 | Terephthalic acid dichloride | SML(T) = 7,5 mg/kg (expressed as Terephthalic acid) |
| 24970 | 000120-61-6 | Terephthalic acid, dimethyl ester | |
| 25080 | 001120-36-1 | 1-Tetradecene | SML = 0,05 mg/kg |
| 25090 | 000112-60-7 | Tetraethyleneglycol | |
| 25120 | 000116-14-3 | Tetrafluoroethylene | SML = 0,05 mg/kg |
| 25150 | 000109-99-9 | Tetrahydrofuran | SML = 0,6 mg/kg |
| 25180 | 000102-60-3 | N,N,N′,N′,-Tetrakis(2-hydroxypropyl)ethylenediamine | |
| 25210 | 000584-84-9 | 2,4-Toluene diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 25240 | 000091-08-7 | 2,6-Toluene diisocyanate | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 25270 | 026747-90-0 | 2,4-Toluene diisocyanate dimer | QM(T) = 1 mg/kg (expressed as NCO) ( 26 ) |
| 25360 | Trialkyl(C5-C15)acetic acid, 2,3-epoxypropyl ester | QM = 1 mg/kg in FP (expressed as Epoxy group, Mw = 43) | |
| 25380 | — | Trialkyl acetic acid (C7-C17), vinyl esters (= Vinyl versatate) | QMA = 0,05 mg/6 dm 2 |
| 25385 | 000102-70-5 | Triallyamine | In compliance with the specifications laid down in Annex V |
| 25420 | 000108-78-1 | 2,4,6-Triamino-1,3,5-triazine | SML = 30 mg/kg |
| 25450 | 026896-48-0 | Tricyclodecanedimethanol | SML = 0,05 mg/kg |
| 25510 | 000112-27-6 | Triethyleneglycol | |
| [F425540 | 000528-44-9 | Trimellitic acid | SML(T) = 5 mg/kg ( 35 ) |
| 25550 | 000552-30-7 | Trimellitic anhydride | SML(T) = 5 mg/kg ( 35 ) (expressed as trimellitic acid)] |
| 25600 | 000077-99-6 | 1,1,1-Trimethylolpropane | SML = 6 mg/kg |
| 25840 | 003290-92-4 | 1,1,1-Trimethylolpropane trimethacrylate | SML = 0,05 mg/kg |
| 25900 | 000110-88-3 | Trioxane | SML = 0,05 mg/kg |
| 25910 | 024800-44-0 | Tripropyleneglycol | |
| 25927 | 027955-94-8 | 1,1,1-Tris(4-hydroxyphenol)ethane | QM= 0,5 mg/kg in FP. For use only in polycarbonates |
| 25960 | 000057-13-6 | Urea | |
| 26050 | 000075-01-4 | Vinyl chloride | See Council Directive 78/142/EEC |
| 26110 | 000075-35-4 | Vinylidene chloride | QM = 5 mg/kg in FP or SML = ND (DL = 0,05 mg/kg) |
| 26140 | 000075-38-7 | Vinylidene fluoride | SML = 5 mg/kg |
| 26155 | 001072-63-5 | 1-Vinylimidazole | QM = 5 mg/kg in FP |
| 26170 | 003195-78-6 | N-Vinyl-N-methylacetamide | QM = 2 mg/kg in FP |
| 26320 | 002768-02-7 | Vinyltrimethoxysilane | QM = 5 mg/kg in FP |
| 26360 | 007732-18-5 | Water | In compliance with Directive 98/83/EC |
Textual Amendments
F3 Inserted by Commission Directive 2004/19/EC of 1 March 2004 amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs (Text with EEA relevance).
F4 Inserted by Commission Directive 2005/79/EC of 18 November 2005 amending Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with food (Text with EEA relevance).
Section B U.K.
List of monomers and other starting substances which may continue to be used pending a decision on inclusion in Section A
| Ref. No | CAS No | Name | Restrictions and/or specifications |
|---|---|---|---|
| (1) | (2) | (3) | (4) |
| [ F6 | |||
| F6 | |||
| F6 | |||
| F6 ] | |||
| [ F5 ] | |||
| 13050 | 000528-44-9 | 1,2,4-Benzenetricarboxylic acid | See ‘ Trimellitic acid ’ |
| [ F5 ] | |||
| [ F6 ] | |||
| 15730 | 000077-73-6 | Dicyclopentadiene | |
| [ F6 | |||
| F6 ] | |||
| 18370 | 000592-45-0 | 1,4-Hexadiene | |
| [ F6 ] | |||
| [ F5 ] | |||
| [ F6 ] | |||
| 21970 | 000923-02-4 | N-Methylolmethacrylamide | |
| [ F5 | |||
| F5 | |||
| F5 ] | |||
| 26230 | 000088-12-0 | Vinylpyrrolidone | ] |
Options/Help
Print Options
PrintThe Whole Directive
PrintThis Annex only
Mae deddfwriaeth ar gael mewn fersiynau gwahanol:
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Dewisiadau Agor
Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd
Rhagor o Adnoddau
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
- y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- pob fformat o’r holl ddogfennau cysylltiedig
- slipiau cywiro
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Llinell Amser Newidiadau
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Rhagor o Adnoddau
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
- y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
- slipiau cywiro
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys
- rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
- manylion rhoi grym a newid cyffredinol
- pob fformat o’r holl ddogfennau cysylltiedig
- dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Mae’r holl gynnwys ar gael dan Drwydded Llywodraeth Agored v3.0 ac eithrio ble nodir yn wahanol. Yn ychwanegol mae’r safle hwn â chynnwys sy’n deillio o EUR-Lex, a ailddefnyddiwyd dan delerau Penderfyniad y Comisiwn 2011/833/EU ar ailddefnyddio dogfennau o sefydliadau’r UE. Am ragor o wybodaeth gweler ddatganiad cyhoeddus Swyddfa Gyhoeddiadau’r UE ar ailddefnyddio.