Directive 2003/87/EC of the European Parliament and of the CouncilDangos y teitl llawn

[F1 PART A — U.K. Monitoring and reporting of emissions from stationary installations]

Monitoring of carbon dioxide emissions U.K.

Emissions shall be monitored either by calculation or on the basis of measurement.

Calculation U.K.

Calculations of emissions shall be performed using the formula:

Activity data × Emission factor × Oxidation factor

Activity data (fuel used, production rate etc.) shall be monitored on the basis of supply data or measurement.

Accepted emission factors shall be used. Activity-specific emission factors are acceptable for all fuels. Default factors are acceptable for all fuels except non-commercial ones (waste fuels such as tyres and industrial process gases). Seam-specific defaults for coal, and EU-specific or producer country-specific defaults for natural gas shall be further elaborated. IPCC default values are acceptable for refinery products. The emission factor for biomass shall be zero.

If the emission factor does not take account of the fact that some of the carbon is not oxidised, then an additional oxidation factor shall be used. If activity-specific emission factors have been calculated and already take oxidation into account, then an oxidation factor need not be applied.

Default oxidation factors developed pursuant to Directive 96/61/EC shall be used, unless the operator can demonstrate that activity-specific factors are more accurate.

A separate calculation shall be made for each activity, installation and for each fuel.

Measurement U.K.

Measurement of emissions shall use standardised or accepted methods, and shall be corroborated by a supporting calculation of emissions.

Monitoring of emissions of other greenhouse gases U.K.

[F2 Standardised or accepted methods, developed by the Commission in collaboration with all relevant stakeholders and adopted pursuant to Article 14(1), shall be used.]

Textual Amendments

F2 Substituted by Directive (EU) 2018/410 of the European Parliament and of the Council of 14 March 2018 amending Directive 2003/87/EC to enhance cost-effective emission reductions and low-carbon investments, and Decision (EU) 2015/1814 (Text with EEA relevance).

Reporting of emissions U.K.

Each operator shall include the following information in the report for an installation:

A.

Data identifying the installation, including:

• Name of the installation;

• Its address, including postcode and country;

• Type and number of Annex I activities carried out in the installation;

• Address, telephone, fax and email details for a contact person; and

• Name of the owner of the installation, and of any parent company.

B.

For each Annex I activity carried out on the site for which emissions are calculated:

• Activity data;

• Emission factors;

• Oxidation factors;

• Total emissions; and

• Uncertainty.

C.

For each Annex I activity carried out on the site for which emissions are measured:

• Total emissions;

• Information on the reliability of measurement methods; and

• Uncertainty.

D.

For emissions from combustion, the report shall also include the oxidation factor, unless oxidation has already been taken into account in the development of an activity-specific emission factor.

Member States shall take measures to coordinate reporting requirements with any existing reporting requirements in order to minimise the reporting burden on businesses.

Textual Amendments

F1 Inserted by Directive 2008/101/EC of the European Parliament and of the Council of 19 November 2008 amending Directive 2003/87/EC so as to include aviation activities in the scheme for greenhouse gas emission allowance trading within the Community (Text with EEA relevance).