12.MISCELLANEOUS
12.1.
Audible warning device(s)
12.1.1.Location, method of affixing, placement and orientation of the device(s), with dimensions:
12.1.2.Number of device(s):
12.1.3.EC type-approval number(s):
12.1.4.Electrical/pneumatic (1) circuit diagram:
12.1.5.Rated voltage or pressure:
12.1.6.Drawing of the mounting device:
12.2.
Devices to prevent unauthorised use of the vehicle
12.2.1.
Protective device
12.2.1.1.A detailed description of the vehicle type with regard to the arrangement and design of the control or of the unit on which the protective device acts:
12.2.1.2.Drawings of the protective device and of its mounting on the vehicle:
12.2.1.3.A technical description of the device:
12.2.1.4.Details of the lock combinations used:
12.2.1.5.
Vehicle immobiliser
12.2.1.5.1.EC type-approval number, if available:
12.2.1.5.2.
For immobilisers not yet approved
12.2.1.5.2.1.A detailed technical description of the vehicle immobiliser and of the measures taken against inadvertent activation:
12.2.1.5.2.2.The system(s) on which the vehicle immobiliser acts:
12.2.1.5.2.3.Number of effective interchangeable codes, if applicable:
12.2.2.
Alarm system (if any)
12.2.2.1.EC type-approval number, if available:
12.2.2.2.
For alarm systems not yet approved
12.2.2.2.1.A detailed description of the alarm system and of the vehicle parts related to the alarm system installed:
12.2.2.2.2.A list of the main components comprising the alarm system:
12.2.3.A brief description of the electrical/electronic components (if any):
12.3.
Towing device(s)
12.3.1.Front: Hook/eye/other (1)
12.3.2.Rear: Hook/eye/other/none (1)
12.3.3.Drawing or photograph of the chassis/area of the vehicle body showing the position, construction and mounting of the towing device(s):
12.4.Details of any non-engine related devices designed to influence fuel consumption (if not covered by other items):
12.5.Details of any non-engine related devices designed to reduce noise (if not covered by other items):
12.6.
Speed limiters (Directive 92/24/EEC)
12.6.1.Manufacturer(s):
12.6.2.Type(s):
12.6.3.EC type-approval number(s), if available:
12.6.4.Speed or range of speeds at which the speed limitation may be set: … km/h
12.7.
Table of installation and use of RF transmitters in the vehicle(s), if applicable:
| Frequency bands (Hz) | max. output power (W) | antenna position at vehicle, specific conditions for installation and/or use |
The applicant for type-approval must also supply, where appropriate:
Appendix 1
A list (with make(s) and type(s) of all electrical and/or electronic components concerned by this Directive (see points 2.1.9. and 2.1.10. of Directive 2004/104/EC) and not previously listed.
Appendix 2
Schematics or drawing of the general arrangement of electrical and/or electronic components (concerned by Directive 2004/104/EC) and the general wiring harness arrangement.
Appendix 3
Description of vehicle chosen to represent the type
Body style:
Left or right hand drive:
Wheelbase:
Appendix 4
Relevant test report(s) supplied by the manufacturer or approved/recognised laboratories for the purpose of drawing up the type-approval certificate.