[F14. TRANSMISSION (3) U.K.
4.1. Drawing of the transmission: … U.K.
4.2. Type (mechanical, hydraulic, electric, etc.): … U.K.
4.2.1. A brief description of the electrical/electronic components (if any): … U.K.
4.3. Moment of inertia of engine flywheel: … U.K.
4.3.1. Additional moment of inertia with no gear engaged: … U.K.
4.4. Clutch U.K.
4.4.1. Type: … U.K.
4.4.2. Maximum torque conversion: … U.K.
4.5. Gearbox U.K.
4.5.1. Type (manual/automatic/CVT (continuously variable transmission)) (2) U.K.
4.5.2. Location relative to the engine: … U.K.
4.5.3. Method of control: … U.K.
4.6. Gear ratios U.K.
4.7. Maximum vehicle design speed (in km/h) (4) : … U.K.
4.8. Speedometer U.K.
4.8.1. Method of operation and description of drive mechanism: … U.K.
4.8.2. Instrument constant: … U.K.
4.8.3. Tolerance of the measuring mechanism (pursuant to item 2.1.3 of Annex II to Directive 75/443/EEC): … U.K.
4.8.4. Overall transmission ratio (pursuant to item 2.1.2 of Annex II to Directive 75/443/EEC) or equivalent data: … U.K.
4.8.5. Diagram of the speedometer scale or other forms of display: … U.K.
4.9. Tachograph: yes/no (2) U.K.
4.9.1 Approval mark: … U.K.
4.10. Differential lock: yes/no/optional (2) U.K.
[F24.11. Gear shift indicator (GSI) U.K.
4.11.1. Acoustic indication available yes/no ( 1 ). If yes, description of sound and sound level at the driver’s ear in dB(A). (Acoustic indication always switchable on/off) U.K.
4.11.2. Information according to point 4.6 of Annex I to Regulation (EU) No 65/2012 (manufacturer’s declared value) U.K.
4.11.3. Photographs and/or drawings of the gear shift indicator instrument and brief description of the system components and operation:] ] U.K.
Textual Amendments
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
[F1 [F1If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.]
Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).
The specified particulars are to be given for any proposed variants.
With respect to trailers, maximum speed permitted by the manufacturer.]
Textual Amendments
F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
F1 Substituted by Commission Regulation (EU) 2015/166 of 3 February 2015 supplementing and amending Regulation (EC) No 661/2009 of the European Parliament and of the Council as regards the inclusion of specific procedures, assessment methods and technical requirements, and amending Directive 2007/46/EC of the European Parliament and of the Council, and Commission Regulations (EU) No 1003/2010, (EU) No 109/2011 and (EU) No 458/2011 (Text with EEA relevance).