Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance) (repealed)

Changes over time for: Division 9.10.

Version Superseded: 02/09/2020

Alternative versions:

05/09/2007- Amendment
29/04/2009- Amendment
Exit day: start of implementation period31/01/2020 11pm- Amendment
31/01/2020
Point in time
02/09/2020- Amendment
End of implementation period31/12/2020- Amendment

Status:

Cyhoeddir Cyfarwyddebau’r UE ar y wefan hon i gynorthwyo croesgyfeirio o ddeddfwriaeth y DU. Ers diwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.) nid oes unrhyw ddiwygiadau wedi'u cymhwyso i'r fersiwn hon.

[F19.10. Interior arrangement U.K.

9.10.1. Interior protection for occupants U.K.

9.10.1.1. Layout drawing or photographs showing the position of the attached sections or views: … U.K.

9.10.1.2. Photograph or drawing showing the reference zone including the exempted area referred to in point 2.3.1 of Annex I to Council Directive 74/60/EEC ( OJ L 38, 11.2.1974, p. 2 ): … U.K.

9.10.1.3. Photographs, drawings and/or an exploded view of the interior fittings, showing the parts in the passenger compartment and the materials used (with the exception of interior rear view mirrors), arrangement of controls, roof and opening roof, backrest, seats and the rear part of seats: … U.K.

9.10.2. Arrangement and identification of controls, tell-tales and indicators U.K.

9.10.2.1. Photographs and/or drawings of the arrangement of symbols and controls, tell-tales and indicators: … U.K.

9.10.2.2. Photographs and/or drawings of the identification of controls, tell-tales and indicators and of the vehicle parts referred to in Annex II and III of Directive 78/316/EEC where relevant: … U.K.

9.10.2.3. Summary table U.K.

The vehicle is equipped with the following controls, indicators and tell-tales pursuant to Annexes II and III to Directive 78/316/EEC

Controls, tell-tales and indicators for which, when fitted, identification is mandatory, and symbols to be used for that purpose

Symbol No	Device	Control/indicator available ^a	Identified by symbol ^a	Where ^b	Tell-tale available ^a	Identified by symbol ^a	Where ^b
^a x = yes — = no or not separately available o = optional.
^b d = directly on control, indicator or tell-tale c = in close vicinity.
1	Master light
2	Dipped-beam headlamps
3	Main-beam headlamps
4	Position (side) lamps
5	Front fog lamps
6	Rear fog lamp
7	Headlamp levelling device
8	Parking lamps
9	Direction indicators
10	Hazard warning
11	Windscreen wiper
12	Windscreen washer
13	Windscreen wiper and washer
14	Headlamp cleaning device
15	Windscreen demisting and defrosting
16	Rear window demisting and defrosting
17	Ventilating fan
18	Diesel pre-heat
19	Choke
20	Brake failure
21	Fuel level
22	Battery charging condition
23	Engine coolant temperature

Controls, tell-tales and indicators for which, when fitted, identification is optional, and symbols which shall be used if they are to be identified

Symbol No	Device	Control/indicator available ^a	Identified by symbol ^a	Where ^b	Tell-tale available ^a	Identified by symbol ^a	Where ^b
^a x = yes — = no or not separately available o = optional.
^b d = directly on control, indicator or tell-tale c = in close vicinity.
1	Parking brake
2	Rear window wiper
3	Rear window washer
4	Rear window wiper and washer
5	Intermittent windscreen wiper
6	Audible warning device (horn)
7	Front hood (bonnet)
8	Rear hood (boot)
9	Seat-belt
10	Engine oil pressure
11	Unleaded petrol
…
…
…

9.10.3. Seats U.K.

9.10.3.1. Number of seating positions (3) : … U.K.

9.10.3.1.1. Location and arrangement: … U.K.

9.10.3.2. Seat(s) designated for use only when the vehicle is stationary: … U.K.

9.10.3.3. Mass: … U.K.

9.10.3.4. Characteristics: for seats not type-approved as components, description and drawings of U.K.

9.10.3.4.1. The seats and their anchorages: … U.K.

9.10.3.4.2. The adjustment system: … U.K.

9.10.3.4.3. The displacement and locking systems: … U.K.

9.10.3.4.4. The seat-belt anchorages (if incorporated in the seat structure): … U.K.

9.10.3.4.5. The parts of the vehicle used as anchorages: … U.K.

9.10.3.5. Coordinates or drawing of the R-point (4) U.K.

9.10.3.5.1. Driver's seat: … U.K.

9.10.3.5.2. All other seating positions: … U.K.

9.10.3.6. Design torso angle U.K.

9.10.3.6.1. Driver's seat: … U.K.

9.10.3.6.2. All other seating positions: … U.K.

9.10.3.7. Range of seat adjustment U.K.

9.10.3.7.1. Driver's seat: … U.K.

9.10.3.7.2. All other seating positions: … U.K.

9.10.4. Head restraints U.K.

9.10.4.1. Type(s) of head restraints: integrated/detachable/separate (2) U.K.

9.10.4.2. Type-approval number(s), if available: … U.K.

9.10.4.3. For head restraints not yet approved U.K.

9.10.4.3.1. A detailed description of the head restraint, specifying in particular the nature of the padding material or materials and, where applicable, the position and specifications of the braces and anchorage pieces for the type of seat for which approval is sought: … U.K.

9.10.4.3.2. In the case of a ‘ separate ’ head restraint U.K.

9.10.4.3.2.1. A detailed description of the structural zone to which the head restraint is intended to be fixed: … U.K.

9.10.4.3.2.2. Dimensional drawings of the characteristic parts of the structure and the head restraint: … U.K.

9.10.5. Heating systems for the passenger compartment U.K.

9.10.5.1. A brief description of the vehicle type with regard to the heating system if the heating system uses the heat of the engine cooling fluid: … U.K.

9.10.5.2. A detailed description of the vehicle type with regard to the heating if the cooling air or the exhaust gases of the engine are used as heat source, including: U.K.

9.10.5.2.1. Layout drawing of the heating system showing its position in the vehicle: … U.K.

9.10.5.2.2. Layout drawing of the heat exchanger for heating systems using the exhaust gases for heating, or of the parts where the heat exchange takes place (for heating systems using the engine cooling air for heating): … U.K.

9.10.5.2.3. Sectional drawing of the heat exchanger or the parts respectively where the heat exchange takes place indicating the thickness of the wall, used materials and characteristics of the surface: … U.K.

9.10.5.2.4. Specifications shall be given for further important components of the heating system such as, for example, the heater fan, with regard to their method of construction and technical data: … U.K.

9.10.5.3. A brief description of the vehicle type with regard to the combustion heating system and the automatic control: … U.K.

9.10.5.3.1. Layout drawing of the combustion heater, the air inlet system, the exhaust system, the fuel tank, the fuel supply system (including the valves) and the electrical connections showing their positions in the vehicle. U.K.

9.10.5.4. Maximum electrical consumption: …… kW U.K.

9.10.6. Components influencing the behaviour of the steering mechanism in the event of an impact U.K.

9.10.6.1. A detailed description, including photograph(s) and/or drawing(s), of the vehicle type with respect to the structure, the dimensions, the lines and the constituent materials of that part of the vehicle forward of the steering control, including those components designed to contribute to the absorption of energy in the event of an impact against the steering control: … U.K.

9.10.6.2. Photograph(s) and/or drawing(s) of vehicle components other than those described in 9.10.6.1 as identified by the manufacturer in agreement with the technical service, as contributing to the behaviour of the steering mechanism in case of impact: … U.K.

9.10.7. Burning behaviour of materials used in the interior construction of certain categories of motor vehicles U.K.

9.10.7.1. Material(s) used for the interior lining of the roof U.K.

9.10.7.1.1. Component type-approval number(s), if available: … U.K.

9.10.7.1.2. For materials not approved U.K.

9.10.7.1.2.1. Base material(s)/designation: ……/…… U.K.

9.10.7.1.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.1.2.3. Type of coating (2) : … U.K.

9.10.7.1.2.4. Maximum/minimum thickness: ……/…… mm U.K.

9.10.7.2. Material(s) used for the rear and side walls U.K.

9.10.7.2.1. Component type-approval number(s), if available: … U.K.

9.10.7.2.2. For materials not approved U.K.

9.10.7.2.2.1. Base material(s)/designation: ……/…… U.K.

9.10.7.2.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.2.2.3. Type of coating (2) : … U.K.

9.10.7.2.2.4. Maximum/minimum thickness: ……/…… mm U.K.

9.10.7.3. Material(s) used for the floor U.K.

9.10.7.3.1. Component type-approval number(s), if available: … U.K.

9.10.7.3.2. For materials not approved U.K.

9.10.7.3.2.1. Base material(s)/designation: ……/…… U.K.

9.10.7.3.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.3.2.3. Type of coating (2) : … U.K.

9.10.7.3.2.4. Maximum/minimum thickness: ……/…… mm U.K.

9.10.7.4. Material(s) used for the upholstery of the seats U.K.

9.10.7.4.1. Component type-approval number(s), if available: … U.K.

9.10.7.4.2. For materials not approved U.K.

9.10.7.4.2.1. Base material(s)/designation: ……/…… U.K.

9.10.7.4.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.4.2.3. Type of coating (2) : … U.K.

9.10.7.4.2.4. Maximum/minimum thickness: ……/…… mm U.K.

9.10.7.5. Material(s) used for the heating and ventilation pipes U.K.

9.10.7.5.1. Component type-approval number(s), if available: … U.K.

9.10.7.5.2. For materials not approved U.K.

9.10.7.5.2.1. Base material(s)/designation: ……/.….. U.K.

9.10.7.5.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.5.2.3. Type of coating (2) : … U.K.

9.10.7.5.2.4. Maximum/minimum thickness: ……/……. mm U.K.

9.10.7.6. Material(s) used for luggage racks U.K.

9.10.7.6.1. Component type-approval number(s), if available: … U.K.

9.10.7.6.2. For materials not approved U.K.

9.10.7.6.2.1. Base material(s)/designation: ……/…… U.K.

9.10.7.6.2.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.6.2.3. Type of coating (2) : … U.K.

9.10.7.6.2.4. Maximum/minimum thickness: ……/…… mm U.K.

9.10.7.7. Material(s) used for other purposes U.K.

9.10.7.7.1. Intended purposes: … U.K.

9.10.7.7.2. Component type-approval number(s), if available: … U.K.

9.10.7.7.3. For materials not approved U.K.

9.10.7.7.3.1. Base material(s)/designation: ……/…… U.K.

9.10.7.7.3.2. Composite/single (2) material, number of layers (2) : … U.K.

9.10.7.7.3.3. Type of coating (2) : … U.K.

9.10.7.7.3.4. Maximum/minimum thickness: …./…. mm U.K.

9.10.7.8. Components approved as complete devices (seats, separation walls, luggage racks, etc.) U.K.

9.10.7.8.1. Component type-approval number(s): … U.K.

9.10.7.8.2. For the complete device: seat, separation wall, luggage racks, etc. (2) U.K.

9.10.8 Gas used as refrigerant in the air-conditioning system: … U.K.

9.10.8.1 The air-conditioning system is designed to contain fluorinated greenhouse gases with global warming potential higher than 150: yes/no (2) U.K.

9.10.8.2. If yes, fill in the following sections U.K.

9.10.8.2.1. Drawing and brief description of the air-conditioning system, including the reference or part number and material of the leak components; U.K.

9.10.8.2.2. Leakage of the air-conditioning system U.K.

9.10.8.2.4. Reference or part number and material of the components of the system and information about the test (e.g. test report number, approval number, etc.): … U.K.

9.10.8.3. Overall leakage in g/year of the entire system: …] U.K.

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).

(1)

[F1 [F1If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.]

(2)

Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).

(3)

The number of seating positions to be mentioned shall be the one when the vehicle is in motion. A range can be specified in case of modular arrangement.

(4)

‘ R-point ’ or ‘ seating reference point ’ means a design point defined by the vehicle manufacturer for each seating position and established with respect to the three-dimensional reference system as specified in Annex III to Council Directive 77/649/EEC ( OJ L 267, 19.10.1977, p. 1 ).]