3.Special provisions for combustion plants co-incinerating wasteU.K.
3.1.Cproc expressed as daily average values (mg/Nm3) valid until the date set out in Article 82(5)U.K.
For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substances | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 850 | 200 | 200 |
NOx | — | 400 | 200 | 200 |
Dust | 50 | 50 | 30 | 30 |
Cproc for biomass (O2 content 6 %):
Polluting substances | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 200 |
NOx | — | 350 | 300 | 200 |
Dust | 50 | 50 | 30 | 30 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substances | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 850 | 400 to 200 (linear decrease from 100 to 300 MWth) | 200 |
NOx | — | 400 | 200 | 200 |
Dust | 50 | 50 | 30 | 30 |
3.2.
Cproc expressed as daily average values (mg/Nm3) valid from the date set out in Article 82(6)U.K.
For determining the total rated thermal input of the combustion plants, the aggregation rules as defined in Article 29 shall apply. Half-hourly average values shall only be needed in view of calculating the daily average values.
3.2.1.Cproc for combustion plants referred to in Article 30(2), with the exception of gas turbines and gas enginesU.K.
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 400 for peat: 300 | 200 | 200 |
NOx | — | 300 for pulverised lignite: 400 | 200 | 200 |
Dust | 50 | 30 | 25 for peat: 20 | 20 |
Cproc for biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 200 |
NOx | — | 300 | 250 | 200 |
Dust | 50 | 30 | 20 | 20 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 350 | 250 | 200 |
NOx | — | 400 | 200 | 150 |
Dust | 50 | 30 | 25 | 20 |
3.2.2.Cproc for combustion plants referred to in Article 30(3), with the exception of gas turbines and gas enginesU.K.
Cproc for solid fuels with the exception of biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50-100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 400 for peat: 300 | 200 for peat: 300, except in the case of fluidised bed combustion: 250 | 150 for circulating or pressurised fluidised bed combustion or, in case of peat firing, for all fluidised bed combustion: 200 |
NOx | — | 300 for peat: 250 | 200 | 150 for pulverised lignite combustion: 200 |
Dust | 50 | 20 | 20 | 10 for peat: 20 |
Cproc for biomass (O2 content 6 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 200 | 200 | 150 |
NOx | — | 250 | 200 | 150 |
Dust | 50 | 20 | 20 | 20 |
Cproc for liquid fuels (O2 content 3 %):
Polluting substance | < 50 MWth | 50 to 100 MWth | 100 to 300 MWth | > 300 MWth |
---|---|---|---|---|
SO2 | — | 350 | 200 | 150 |
NOx | — | 300 | 150 | 100 |
Dust | 50 | 20 | 20 | 10 |
3.3.C — total emission limit values for heavy metals (mg/Nm3) expressed as average values over the sampling period of a minimum of 30 minutes and a maximum of 8 hours (O2 content 6 % for solid fuels and 3 % for liquid fuels)U.K.
Polluting substances | C |
---|---|
Cd + Tl | 0,05 |
Hg | 0,05 |
Sb + As + Pb + Cr + Co + Cu + Mn + Ni + V | 0,5 |
3.4.C — total emission limit value (ng/Nm3) for dioxins and furans expressed as average value measured over the sampling period of a minimum of 6 hours and a maximum of 8 hours (O2 content 6 % for solid fuels and 3 % for liquid fuels)U.K.
Polluting substance | C |
---|---|
Dioxins and furans | 0,1 |