- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (11/05/2016)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) (Text with EEA relevance)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
Unauthorised movement as referred to in points 4.4 and 4.5 above means to pass:
a trackside colour light signal or semaphore at danger, or an order to STOP where a Train Protection system (TPS) is not operational,
the end of a safety related movement authority provided in a TPS,
a point communicated by verbal or written authorisation laid down in regulations,
stop boards (buffer stops are not included) or hand signals.
Any case in which a vehicle without any traction unit attached or a train that is unattended runs away past a signal at danger is not included. Any case in which, for any reason, the signal is not turned to danger in time to allow the driver to stop the train before the signal is not included.
National safety authorities may report separately on the four indices of unauthorised movement listed in the indents in this point and shall report at least an aggregate indicator containing data on all four items indices.
Value of safety per se: Willingness to Pay (WTP) values based on stated preference studies carried out in the Member State for which they are applied.
Direct and indirect economic costs: cost values appraised in the Member State, composed of:
medical and rehabilitation cost,
legal court cost, cost for police, private crash investigations, the emergency service and administrative costs of insurance,
production losses: value to society of goods and services that could have been produced by the person if the accident had not occurred.
When calculating the costs of casualties, fatalities and serious injuries shall be considered separately (different VPC for fatality and serious injury).
For the value of safety per se, the assessment of whether available estimates are appropriate or not shall be based on the following considerations:
estimates shall relate to a system for valuation of mortality risk reduction in the transport sector and follow a WTP approach according to stated preference methods,
the respondent sample used for the values shall be representative of the population concerned. In particular, the sample has to reflect the age/income distribution along with other relevant socioeconomic and/or demographic characteristics of the population,
method for eliciting WTP values: survey design shall be such that questions are clear/meaningful to respondents.
Direct and indirect economic costs shall be appraised on the basis of the real costs borne by society.
VT = monetary value of travel time savings
Value of time for a passenger of a train (an hour)
VTP = [VT of work passengers]*[Average percentage of work passengers per year] + [VT of non-work passengers]*[Average percentage of non-work passengers per year]
VTP is measured in EUR per passenger per hour
‘Work passenger’ means a passenger travelling in connection with their professional activities excluding commuting.
Value of time for a freight train (an hour)
VTF = [VT of freight trains]*[(Tonne-km)/(Train-km)]
VTF is measured in EUR per freight tonne per hour
Average tonnes of goods transported per train in 1 year = (Tonne-km)/(Train-km)
CM = Cost of 1 minute of delay of a train
Passenger train
CMP = K1*(VTP/60)*[(Passenger-km)/(Train-km)]
Average number of passengers per train in 1 year = (Passenger-km)/(Train-km)
Freight train
CMF = K2* (VTF/60)
Factors K1 and K2 are between the value of time and the value of delay, as estimated by stated preference studies, to take into account that the time lost as a result of delays is perceived significantly more negatively than normal travel time.
Cost of delays of an accident = CMP *(Minutes of delay of passenger trains) + CMF *(Minutes of delay of freight trains)
Scope of the model
Cost of delays is to be calculated for significant accidents, as follows:
real delays on the railway lines where accidents occurred as measured at terminal station
real delays or, if not possible, estimated delays on the other affected lines.
Warning, providing automatic warning to driver.
Warning and automatic stop, providing automatic warning to driver and automatic stop when passing a signal at danger.
Warning and automatic stop and discrete supervision of speed, providing protection of danger points, where ‘discrete supervision of speed’ means supervision of speed at certain locations (speed traps) at the approach of a signal.
Warning and automatic stop and continuous supervision of speed, providing protection of danger points and continuous supervision of the speed limits of the line, where ‘continuous supervision of speed’ means continuous indication and enforcement of the maximal allowed target speed on all sections of the line.
Type (d) is regarded as Automatic Train Protection (ATP) system.
Protection by the use of physical devices includes:
half or full barriers,
gates.
Warning by the use of fixed equipment at level crossings:
visible devices: lights,
audible devices: bells, horns, klaxons, etc.
Active level crossings are classified as:
Manual: a level crossing where user-side protection or warning is manually activated by a railway employee.
Automatic with user-side warning: a level crossing where user-side warning is activated by the approaching train.
Automatic with user-side protection: a level crossing where user-side protection is activated by the approaching train. This shall include a level crossing with both user-side protection and warning.
Rail-side protected: a level crossing where a signal or other train protection system permits a train to proceed once the level crossing is fully user-side protected and is free from incursion.
RID, Regulations concerning the International Carriage of Dangerous Goods by Rail, as adopted under Directive 2008/68/EC of the European Parliament and of the Council of 24 September 2008 on the inland transport of dangerous goods (OJ L 260, 30.9.2008, p. 13).
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys