- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (01/01/2008)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Regulation (EEC) No 2454/93 of 2 July 1993 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (repealed)
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3
Version Superseded: 01/01/2009
Point in time view as at 01/01/2008.
There are currently no known outstanding effects for the Commission Regulation (EEC) No 2454/93 (repealed), TITLE IV.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
This chapter lays down, for textiles and textile articles falling within Section XI of the combined nomenclature, and for certain products other than textiles and textile articles, the working or processing which shall be regarded as satisfying the criteria laid down in Article 24 of the Code and shall confer on the products concerned the origin of the country in which they were carried out.
‘Country’ means either a third country or the Community as appropriate.
For textiles and textile articles falling within Section XI of the combined nomenclature, a complete process, as specified in Article 37, shall be regarded as a working or processing conferring origin in terms of Article 24 of the Code.
Working or processing as a result of which the products obtained receive a classification under a heading of the combined nomenclature other than those covering the various non-originating materials used shall be regarded as complete processes.
However, for products listed in Annex 10, only the specific processes referred to in column 3 of that Annex in connection with each product obtained shall be regarded as complete, whether or not they involve a change of heading.
The method of applying the rules in Annex 10 is described in the introductory notes in Annex 9.
For the purposes of the preceding Article, the following shall in any event be considered as insufficient working or processing to confer the status of originating products whether or not there is a change of heading:
operations to ensure the preservation of products in good condition during transport and storage (ventilation, spreading out, drying, removal of damaged parts and like operations);
simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, cutting up;
changes of packing and breaking-up and assembly of consignments;
simple placing in bags, cases, boxes, fixing on cards or boards, etc., and all other simple packing operations;
the affixing of marks, labels or other like distinguishing signs on products or their packaging;
simple assembly of parts of products to constitute a complete product;
a combination of two or more operations specified in (a) to (e).
In the case of products obtained which are listed in Annex 11, the working or processing referred to in column 3 of the Annex shall be regarded as a process or operation conferring origin under Article 24 of the Code.
The method of applying the rules set out in Annex 11 is described in the introductory notes in Annex 9.
Where the lists in Annexes 10 and 11 provide that origin is conferred if the value of the non-originating materials used does not exceed a given percentage of the ex-works price of the products obtained, such percentage shall be calculated as follows:
‘value’ means the customs value at the time of import of the non-originating materials used or, if this is not known and cannot be ascertained, the first ascertainable price paid for such materials in the country of processing,
‘ex-works price’ means the ex-works price of the product obtained minus any internal taxes which are, or may be, repaid when such product is exported,
‘value acquired as a result of assembly operations’ means the increase in value resulting from the assembly itself, together with any finishing and checking operations, and from the incorporation of any parts originating in the country where the operations in question were carried out, including profit and the general costs borne in that country as a result of the operations.
[F11. Accessories, spare parts or tools delivered with any piece of equipment, machine, apparatus or vehicle which form part of its standard equipment shall be deemed to have the same origin as that piece of equipment, machine, apparatus or vehicle.]
[F12.] Essential spare parts for use with any piece of equipment, machine, apparatus or vehicle put into free circulation or previously exported shall be deemed to have the same origin as that piece of equipment, machine, apparatus or vehicle provided the conditions laid down in this section are fulfilled.
Textual Amendments
The presumption of origin referred to in the preceding Article shall be accepted only:
if this is necessary for importation into the country of destination,
if the incorporation of the said essential spare parts in the piece of equipment, machine, apparatus or vehicle concerned at the production stage would not have prevented the piece of equipment, machine, apparatus or vehicle from having Community origin or that of the country of manufacture.
For the purposes of Article 41:
‘piece of equipment, machine, apparatus or vehicle’ means goods listed in Sections XVI, XVII and XVIII of the combined nomenclature;
‘essential spare parts’ means parts which are:
components without which the proper operation of the goods referred to in (a) which have been put into free circulation or previously exported cannot be ensured, and
characteristic of those goods, and
intended for their normal maintenance and to replace parts of the same kind which are damaged or have become unserviceable.
Where an application is presented to the competent authorities or authorized agencies of the Member States for a certificate of origin for essential spare parts within the meaning of Article 41, box 6 (Item number, marks, numbers, number and kind of packages, description of goods) of that certificate and the application relating thereto shall include a declaration by the person concerned that the goods mentioned therein are intended for the normal maintenance of a piece of equipment, machine, apparatus or vehicle previously exported, together with the exact particulars of the said piece of equipment, machine, apparatus or vehicle.
Whenever possible, the person concerned shall also give the particulars of the certificate of origin (issuing authority, number and date of certificate) under cover of which was exported the piece of equipment, machine, apparatus or vehicle for whose maintenance the parts are intended.
Where the origin of essential spare parts within the meaning of Article 41 must be proved for their release for free circulation in the Community by the production of a certificate of origin, the certificate shall include the particulars referred to in Article 44.
In order to ensure application of the rules laid down in this section, the competent authorities of the Member States may require additional proof, in particular:
production of the invoice or a copy of the invoice relating to the piece of equipment, machine, apparatus or vehicle put into free circulation or previously exported,
the contract or a copy of the contract or any other document showing that delivery is being made as part of the normal maintenance service.
When the origin of a product is or has to be proved on importation by the production of a certificate of origin, that certificate shall fulfil the following conditions:
it shall be made out by a reliable authority or agency duly authorized for that purpose by the country of issue;
it shall contain all the particulars necessary for identifying the product to which it relates, in particular:
the number of packages, their nature, and the marks and numbers they bear,
the type of product,
the gross and net weight of the product; these particulars may, however, be replaced by others, such as the number or volume, when the product is subject to appreciable changes in weight during carriage or when its weight cannot be ascertained or when it is normally identified by such other particulars,
the name of the consignor;
it shall certify unambiguously that the product to which it relates originated in a specific country.
1.A certificate of origin issued by the competent authorities or authorized agencies of the Member States shall comply with the conditions prescribed by Article 47 (a) and (b).
2.The certificates and the applications relating to them shall be made out on forms corresponding to the specimens in Annex 12.
3.Such certificates of origin shall certify that the goods originated in the Community.
However, when the exigencies of export trade so require, they may certify that the goods originated in a particular Member State.
If the conditions of Article 24 of the Code are fulfilled only as a result of a series of operations or processes carried out in different Member States, the goods may only be certified as being of Community origin.
Certificates of origin shall be issued upon written request of the person concerned.
Where the circumstances so warrant, in particular where the applicant maintains a regular flow of exports, the Member States may decide not to require an application for each export operation, on condition that the provisions concerning origin are complied with.
Where the exigencies of trade so require, one or more extra copies of an origin certificate may be issued.
Such copies shall be made out on forms corresponding to the specimen in Annex 12.
1.The certificate shall measure 210 × 297 mm. A tolerance of up to minus 5 mm or plus 8 mm in the length shall be allowed. The paper used shall be white, free of mechanical pulp, dressed for writing purposes and weigh at least 64 g/m2 or between 25 and 30 g/m2 where air-mail paper is used. It shall have a printed guilloche pattern background in sepia such as to reveal any falsification by mechanical or chemical means.
2.The application form shall be printed in the official language or in one or more of the official languages of the exporting Member State. The certificate of origin form shall be printed in one or more of the official languages of the Community or, depending on the practice and requirements of trade, in any other language.
3.Member States may reserve the right to print the certificate of origin forms or may have them printed by approved printers. In the latter case, each certificate must bear a reference to such approval. Each certificate of origin form must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or stamped, by which it can be identified.
The application form and the certificate of origin shall be completed in typescript or by hand in block capitals, in an identical manner, in one of the official languages of the Community or, depending on the practice and requirements of trade, in any other languages.
Each origin certificate referred to in Article 48 shall bear a serial number by which it can be identified. The application for the certificate and all copies of the certificate itself shall bear the same number.
In addition, the competent authorities or authorized agencies of the Member States may number such documents by order of issue.
The competent authorities of the Member States shall determine what additional particulars, if any, are to be given in the application. Such additional particulars shall be kept to a strict minimum.
Each Member State shall inform the Commission of the provisions it adopts in pursuance of the preceding paragraph. The Commission shall immediately communicate this information to the other Member States.
The competent authorities or authorized agencies of the Member States which have issued certificates of origin shall retain the applications for a minimum of two years.
However, applications may also be retained in the form of copies thereof, provided that these have the same probative value under the law of the Member State concerned.
Articles 56 to 65 lay down the conditions for use of certificates of origin relating to agricultural products originating in third countries for which special non-preferential import arrangements have been established, in so far as these arrangements refer to the following provisions.
1.Certificates of origin relating to agricultural products originating in third countries for which special non-preferential import arrangements are established shall be made out on a form conforming to the specimen in Annex 13.
2.Such certificates shall be issued by the competent governmental authorities of the third countries concerned, hereinafter referred to as the issuing authorities, if the products to which the certificates relate can be considered as products originating in those countries within the meaning of the rules in force in the Community.
3.Such certificates shall also certify all necessary information provided for in the Community legislation governing the special import arrangements referred to in Article 55.
4.Without prejudice to specific provisions under the special import arrangements referred to in Article 55 the period of validity of the certificates of origin shall be ten months from the date of issue by the issuing authorities.
1.Certificates of origin drawn up in accordance with the provisions of this subsection shall consist only of a single sheet identified by the word ‘original’ next to the title of the document.
If additional copies are necessary, they shall bear the designation ‘copy’ next to the title of the document.
2.The competent authorities in the Community shall accept as valid only the original of the certificate of origin.
1.The certificate of origin shall measure 210 × 297 mm; a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper used shall be white, not containing mechanical pulp, and shall weigh not less than 40 g/m2. The face of the original shall have a printed yellow guilloche pattern background making any falsification by mechanical or chemical means apparent.
2.The certificates shall be printed and completed in one of the official languages of the Community.
1.The certificate shall be completed in typescript or by means of a mechanical data-processing system, or similar procedure.
2.Entries must not be erased or overwritten. Any changes shall be made by crossing out the wrong entry and if necessary adding the correct particulars. Such changes shall be initialled by the person making them and endorsed by the issuing authorities.
1.Box 5 of the certificates of origin issued in accordance with Articles 56 to 59 shall contain any additional particulars which may be required for the implementation of the special import arrangements to which they relate as referred to in Article 56 (3).
2.Unused spaces in boxes 5, 6 and 7 shall be struck through in such a way that nothing can be added at a later stage.
Each certificate of origin shall bear a serial number, whether or not printed, by which it can be identified, and shall be stamped by the issuing authority and signed by the person or persons empowered to do so.
The certificate shall be issued when the products to which it relates are exported, and the issuing authority shall keep a copy of each certificate issued.
Exceptionally, the certificates of origin referred to above may be issued after the export of the products to which they relate, where the failure to issue them at the time of such export was a result of involuntary error or omission or special circumstances.
The issuing authorities may not issue retrospectively a certificate of origin provided for in Articles 56 to 61 until they have checked that the particulars in the exporter's application correspond to those in the relevant export file.
Certificates issued retrospectively shall bear one of the following:
expedido a posteriori ,
udstedt efterfølgende,
Nachträglich ausgestellt,
Εκδοθέν εκ των υστέρων,
Issued retrospectively,
Délivré a posteriori ,
rilasciato a posteriori ,
afgegeven a posteriori ,
emitido a posteriori ,
[F2annettu jälkikäteen — utfärdat i efterhand ,
utfärdat i efterhand [F3,] ]
[F4Vystaveno dodatečně ,
Välja antud tagasiulatuvalt ,
Izsniegts retrospektīvi ,
Retrospektyvusis išdavimas ,
Kiadva visszamenőleges hatállyal ,
Maħruġ retrospettivament ,
Wystawione retrospektywnie ,
Izdano naknadno ,
[F5Vyhotovené dodatočne ,] ]
[F6издаден впоследствие ,
eliberat ulterior ,]
in the ‘Remarks’ box.
Textual Amendments
F2 Inserted by Act concerning the conditions of accession of the Kingdom of Norway, the Republic of Austria, the Republic of Finland and the Kingdom of Sweden and the adjustments to the Treaties on which the European Union is founded (94/C 241/08).
F3 Substituted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F4 Inserted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F5 Substituted by Commission Regulation (EC) No 883/2005 of 10 June 2005 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Text with EEA relevance).
F6 Inserted by Commission Regulation (EC) No 1792/2006 of 23 October 2006 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement of persons, competition policy, agriculture (veterinary and phytosanitary legislation), fisheries, transport policy, taxation, statistics, social policy and employment, environment, customs union, and external relations by reason of the accession of Bulgaria and Romania.
1.Where the special import arrangements for certain agricultural products provide for the use of the certificate of origin laid down in Articles 56 to 62, the entitlement to use such arrangements shall be subject to the setting up of an administrative cooperation procedure unless specified otherwise in the arrangements concerned.
To this end the third countries concerned shall send the Commission of the European Communities:
the names and addresses of the issuing authorities for certificates of origin together with specimens of the stamps used by the said authorities,
the names and addresses of the government authorities to which requests for the subsequent verification of origin certificates provided for in Article 64 below should be sent.
The Commission shall transmit all the above information to the competent authorities of the Member States.
2.Where the third countries in question fail to send the Commission the information specified in paragraph 1, the competent authorities in the Community shall refuse access entitlement to the special import arrangements.
1.Subsequent verification of the certificates of origin referred to in Articles 56 to 62 shall be carried out at random and whenever reasonable doubt has arisen as to the authenticity of the certificate or the accuracy of the information it contains.
For origin matters the verification shall be carried out on the initiative of the customs authorities.
For the purposes of agricultural rules, the verification may be carried out, where appropriate, by other competent authorities.
2.For the purposes of paragraph 1, the competent authorities in the Community shall return the certificate of origin or a copy thereof to the governmental authority designated by the exporting country, giving, where appropriate, the reasons of form or substance for an enquiry. If the invoice has been produced, the original or a copy thereof shall be attached to the returned certificate. The authorities shall also provide any information that has been obtained suggesting that the particulars given on the certificates are inaccurate or that the certificate is not authentic.
Should the customs authorities in the Community decide to suspend the application of the special import arrangements concerned pending the results of the verification they shall grant release of the products subject to such precautions as they consider necessary.
1.The results of subsequent verifications shall be communicated to the competent authorities in the Community as soon as possible.
The said results must make it possible to determine whether the origin certificates remitted in the conditions laid down in Article 64 above apply to the goods actually exported and whether the latter may actually give rise to application of the special importation arrangements concerned.
2.If there is no reply within a maximum time limit of six months to requests for subsequent verification, the competent authorities in the Community shall definitively refuse to grant entitlement to the special import arrangements.
For the purposes of this Chapter:
‘ manufacture ’ means any kind of working or processing including assembly or specific operations;
‘ material ’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;
‘ product ’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;
‘ goods ’ means both materials and products;
‘ customs value ’ means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation);
‘ ex-works price ’ in the list in Annex 15 means the price paid for the product ex-works to the manufacturer in whose undertaking the last working or processing is carried out, provided that the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;
‘value of materials’ in the list in Annex 15 means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Community or the beneficiary country within the meaning of Article 67(1) or in the beneficiary republic within the meaning of Article 98(1). Where the value of the originating materials used needs to be established, this subparagraph shall be applied mutatis mutandis ;
‘ chapters ’ and ‘ headings ’ mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonised System;
‘ classified ’ refers to the classification of a product or material under a particular heading;
‘ consignment ’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such document, by a single invoice.
1. For the purposes of the provisions concerning generalised tariff preferences granted by the Community to products originating in developing countries (hereinafter referred to as ‘ beneficiary countries ’ ), the following products shall be considered as originating in a beneficiary country:
(a) products wholly obtained in that country within the meaning of Article 68;
(b) products obtained in that country in the manufacture of which products other than those referred to in (a) are used, provided that the said products have undergone sufficient working or processing within the meaning of Article 69.
2. For the purposes of this section, products originating in the Community, within the meaning of paragraph 3, which are subject in a beneficiary country to working or processing going beyond that described in Article 70 shall be considered as originating in that beneficiary country.
3. Paragraph 1 shall apply mutatis mutandis in order to establish the origin of the products obtained in the Community.
4. In so far as Norway and Switzerland grant generalised tariff preferences to products originating in the beneficiary countries referred to in paragraph 1 and apply a definition of the concept of origin corresponding to that set out in this section, products originating in the Community, Norway or Switzerland which are subject in a beneficiary country to working or processing going beyond that described in Article 70 shall be considered as originating in that beneficiary country.
The provisions of the first subparagraph shall apply only to products originating in the Community, Norway or Switzerland (according to the rules of origin relative to the tariff preferences in question) which are exported direct to the beneficiary country.
The provisions of the first subparagraph shall not apply to products falling within Chapters 1 to 24 of the Harmonised System.
The Commission shall publish in the Official Journal of the European Communities (C series) the date from which the provisions laid down in the first and second subparagraphs shall apply.
5. The provisions of paragraph 4 shall apply on condition that Norway and Switzerland grant, by reciprocity, the same treatment to Community products.
1. The following shall be considered as wholly obtained in a beneficiary country or in the Community:
(a) mineral products extracted from its soil or from its seabed;
(b) vegetable products harvested there;
(c) live animals born and raised there;
(d) products from live animals raised there;
(e) products obtained by hunting or fishing conducted there;
(f) products of sea fishing and other products taken from the sea outside its territorial waters by its vessels;
(g) products made on board its factory ships exclusively from the products referred to in (f);
(h) used articles collected there fit only for the recovery of raw materials;
(i) waste and scrap resulting from manufacturing operations conducted there;
(j) products extracted from the seabed or below the seabed which is situated outside its territorial waters but where it has exclusive exploitation rights;
(k) goods produced there exclusively from products specified in (a) to (j).
2. The terms ‘ its vessels ’ and ‘ its factory ships ’ in paragraph 1(f) and (g) shall apply only to vessels and factory ships:
which are registered or recorded in the beneficiary country or in a Member State,
which sail under the flag of a beneficiary country or of a Member State,
which are at least 50 % owned by nationals of the beneficiary country or of Member States or by a company having its head office in that country or in one of those Member States, of which the manager or managers, Chairman of the Board of Directors or of the Supervisory Board, and the majority of the members of such boards are nationals of that beneficiary country or of the Member States and of which, in addition, in the case of companies, at least half the capital belongs to that beneficiary country or to the Member States or to public bodies or nationals of that beneficiary country or of the Member States,
of which the master and officers are nationals of the beneficiary country or of the Member States, and
of which at least 75 % of the crew are nationals of the beneficiary country or of the Member States.
3. The terms ‘ beneficiary country ’ and ‘ Community ’ shall also cover the territorial waters of that country or of the Member States.
4. Vessels operating on the high seas, including factory ships on which the fish caught is worked or processed, shall be considered as part of the territory of the beneficiary country or of the Member State to which they belong, provided that they satisfy the conditions set out in paragraph 2.
For the purposes of Article 67, products which are not wholly obtained in a beneficiary country or in the Community are considered to be sufficiently worked or processed when the conditions set out in the list in Annex 15 are fulfilled.
Those conditions indicate, for all products covered by this section, the working or processing which must be carried out on non-originating materials used in manufacturing, and apply only in relation to such materials.
If a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated shall not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.
[F81. Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 69 are satisfied:
(a) preserving operations to ensure that the products remain in good condition during transport and storage;
(b) breaking-up and assembly of packages;
(c) washing, cleaning; removal of dust, oxide, oil, paint or other coverings;
(d) ironing or pressing of textiles;
(e) simple painting and polishing operations;
(f) husking, partial or total milling, polishing and glazing of cereals and rice;
(g) operations to colour sugar or form sugar lumps; partial or total milling of sugar;
(h) peeling, stoning and shelling, of fruits, nuts and vegetables;
(i) sharpening, simple grinding or simple cutting;
(j) sifting, screening, sorting, classifying, grading, matching; (including the making-up of sets of articles);
(k) simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;
(l) affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;
(m) simple mixing of products, whether or not of different kinds, where one or more components of the mixtures do not meet the conditions laid down in this section to enable them to be considered as originating in a beneficiary country or in the Community;
(n) simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;
(o) a combination of two or more of the operations specified in points (a) to (n);
(p) slaughter of animals.]
2. All the operations carried out in either a beneficiary country or the Community on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.
Textual Amendments
1. The unit of qualification for the application of the provisions of this section shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.
Accordingly, it follows that:
(a) when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;
(b) when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this section.
2. Where, under general rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.
1. By way of derogation from the provisions of Article 69, non-originating materials may be used in the manufacture of a given product, provided that their total value does not exceed 10 % of the ex-works price of the product.
Where, in the list, one or several percentage are given for the maximum value of non-originating materials, such percentages must not be exceeded through the application of the first subparagraph.
2. Paragraph 1 shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.
1. By way of derogation from Article 67, for the purposes of determining whether a product manufactured in a beneficiary country which is a member of a regional group originates therein with the meaning of that Article, products originating in any of the countries of that regional group and used in further manufacture in another country of the group shall be treated as if they originated in the country of further manufacture (regional cumulation).
2. The country of origin of the final product shall be determined in accordance with Article 72a.
[F83. Regional cumulation shall apply to three separate regional groups of beneficiary countries benefiting from the generalised system of preferences:
(a) Group I: Brunei-Darussalam, Cambodia, Indonesia, Laos, Malaysia, Philippines, Singapore, Thailand, Vietnam;
(b) Group II: Bolivia, Colombia, Costa Rica, Ecuador, El Salvador, Guatemala, Honduras, Nicaragua, Panama, Peru, Venezuela;
(c) Group III: Bangladesh, Bhutan, India, Maldives, Nepal, Pakistan, Sri Lanka.
4. The expression ‘ regional group ’ shall be taken to mean Group I, Group II or Group III, as the case may be.]
Textual Amendments
1. When goods originating in a country which is a member of a regional group are worked or processed in another country of the same regional group, they shall have the origin of the country of the regional group where the last working or processing was carried out, provided that:
(a) the value added there, as defined in paragraph 3, is greater than the highest customs value of the products used originating in any one of the other countries of the regional group, and
(b) the working or processing carried out there exceeds that set out in Article 70 and, in the case of textile products, also those operations referred to at Annex 16.
2. When the conditions of original in paragraph 1(a) and (b) are not satisfied, the products shall have the origin of the country of the regional group which accounts for the highest customs value of the originating products coming from other countries of the regional group.
3. ‘ Value added ’ means the ex-works price minus the customs value of each of the products incorporated which originated in another country of the regional group.
4. Proof of the originating status of goods exported from a country of a regional group to another country of the same group to be used in further working or processing, or to be re-exported where no further working or processing takes place, shall be established by a certificate of origin Form A issued in the first country.
5. Proof of the originating status, acquired or retained under the terms of Article 72, this Article and Article 72b, of goods exported from a country of a regional group to the Community, shall be established by a certificate of origin Form A issued or an invoice declaration made out in that country on the basis of a certificate of origin Form A issued according to the provisions of paragraph 4.
6. The country of origin shall be marked in box 12 of the certificate of origin Form A or on the invoice declaration, that country being:
in the case of products exported without further working or processing according to paragraph 4, the country of manufacture;
in the case of products exported after further working or processing, the country of origin as determined in accordance with paragraph 1.
1. Articles 72 and 72a shall apply only where:
(a) the rules regulating trade in the context of regional cumulation, as between the countries of the regional group, are identical to those laid down in this section;
(b) each country of the regional group has undertaken to comply or ensure compliance with the terms of this section and to provide the administrative cooperation necessary both to the Community and to the other countries of the regional group in order to ensure the correct issue of certificates of origin Form A and the verification of certificates of origin Form A and invoice declarations.
[F8This undertaking shall be transmitted to the Commission through the following Secretariats, as the case may be:
Group I: the General Secretariat of the Association of South-East Asian Nations (ASEAN);
Group II: the Andean Community — Central American Common Market and Panama Permanent Joint Committee on Origin (Comité Conjunto Permanente de Origen Comunidad Andina - Mercado Común Centroamericano y Panamá);
Group III: the Secretariat of the South Asian Association for Regional Cooperation (SAARC).]
2. The Commission shall inform the Member States when the conditions set out in paragraph 1 have been satisfied, in the case of each regional group.
3. Article 78(1)(b) shall not apply to products originating in any of the countries of the regional group when they pass through the territory of any of the other countries of the regional group, whether or not further working or processing take place there.
Textual Amendments
Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.
Sets, as defined in general rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating products. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.
In order to determine whether a product is an originating product, it shall not be necessary to determine the origin of the following which might be used in its manufacture:
energy and fuel;
plant and equipment;
machines and tools;
goods which do not enter, and which are not intended to enter, into the final composition of the product.
1. Derogations from the provisions of this section may be made in favour of the least-developed beneficiary countries benefiting from the generalised system of preferences when the development of existing industries or the creation of new industries justifies them. The least-developed beneficiary countries are listed in the Council Regulations and the ECSC Decision concerning the application of generalised tariff preferences. For this purpose, the country concerned shall submit to the Community a request for a derogation together with the reasons for the request in accordance with paragraph 3.
2. The examination of requests shall, in particular, take into account:
(a) cases where the application of existing rules of origin would affect significantly the ability of an existing industry in the country concerned to continue its exports to the Community, with particular reference to cases where this could lead to business closures;
(b) specific cases where it can be clearly demonstrated that significant investment in an industry could be deterred by the rules of origin and where a derogation encouraging implementation of the investment programme would enable the rules to be satisfied by stages;
(c) the economic and social impact of the decision to be taken especially in respect of employment in the beneficiary countries and the Community.
3. In order to facilitate the examination of requests for derogation, the country making the request shall furnish in support of its request the fullest possible information, covering in particular the points listed below:
description of the finished product,
nature and quantity of materials originating in a third country,
manufacturing process,
value added,
the number of employees in the enterprise concerned,
the anticipated volume of the exports to the Community,
other possible sources of supply for raw materials,
reasons for the duration requested,
other observations.
4. The Commission shall present the derogation-request to the Committee. [F8It shall be decided on in accordance with the committee procedure.]
5. Where use is made of a derogation, the following phrase must appear in box 4 of the certificate of origin Form A, or on the invoice declaration laid down in Article 89:
‘ Derogation - Regulation (EC) No …/… ’ .
6. The provisions of paragraphs 1 to 5 shall apply to any prolongations.
Textual Amendments
The conditions set out in this section for acquiring originating status must continue to be fulfilled at all times in the beneficiary country or in the Community.
If originating products exported from the beneficiary country or from the Community to another country are returned, they must be considered as non-originating unless it can be demonstrated to the satisfaction of the competent authorities that:
the products returned are the same as those which were exported, and
they have not undergone any operations beyond that necessary to preserve them in good condition while in that country or while being exported.
1. The following shall be considered as transported direct from the beneficiary country to the Community or from the Community to the beneficiary country:
(a) products transported without passing through the territory of any other country, except in the case of the territory of another country of the same regional group where Article 72 is applied;
(b) products constituting one single consignment transported through the territory of countries other than the beneficiary country or the Community, with, should the occasion arise, trans-shipment or temporary warehousing in those countries, provided that the products remain under the surveillance of the customs authorities in the country of transit or of warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition;
(c) products transported through the territory of Norway or Switzerland and subsequently re-exported in full or in part to the Community or to the beneficiary country, provided that the products remain under the surveillance of the customs authorities of the country of transit or of warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition;
(d) products which are transported by pipeline without interruption across a territory other than that of the exporting beneficiary country or of the Community.
2. Evidence that the conditions specified in paragraph 1(b) and (c) have been fulfilled shall be supplied to the competent customs authorities by the production of:
(a) a single transport document covering the passage from the exporting country through the country of transit; or
(b) a certificate issued by the customs authorities of the country of transit:
(b) giving an exact description of the products,
stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used, and
certifying the conditions under which the products remained in the country of transit;
(c) or, failing these, any substantiating documents.
1. Originating products sent from a beneficiary country for exhibition in another country and sold after the exhibition for importation into the Community shall benefit, on importation, from the tariff preferences referred to in Article 67, provided that the products meet the requirements of this section entitling them to be recognised as originating in the beneficiary country and provided that it is shown to the satisfaction of the competent Community customs authorities that:
(a) an exporter has consigned these products from the beneficiary country directly to the country in which the exhibition is held and has exhibited them there;
(b) the products have been sold or otherwise disposed of by that exporter to a person in the Community;
(c) the products have been consigned during the exhibition or immediately thereafter to the Community in the state in which they were sent for exhibition;
(d) the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.
2. A certificate of origin Form A shall be submitted to the Community customs authorities in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the nature of the products and the conditions under which they have been exhibited may be required.
3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organized for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.
Products originating in the beneficiary country shall benefit from the [X1tariff preferences] referred to in Article 67, on submission of either:
a certificate of origin Form A, a specimen of which appears in Annex 17; or
in the cases specified in Article 89(1), a declaration, the text of which appears in Annex 18, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (hereinafter referred to as the ‘ invoice declaration ’ ).
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. Originating products within the meaning of this section shall be eligible, on importation into the Community, to benefit from the tariff preferences referred to in Article 67, provided that they have been transported directly within the meaning of Article 78, on submission of a certificate of origin Form A, issued by the customs authorities or by other competent governmental authorities of the beneficiary country, provided that the latter country:
has communicated to the Commission the information required by Article 93, and
assists the Community by allowing the customs authorities of Member States to verify the authenticity of the document or the accuracy of the information regarding the true origin of the products in question.
2. A certificate of origin Form A may be issued only where it can serve as the documentary evidence required for the purposes of the tariff preferences referred to in Article 67.
3. A certificate of origin Form A shall be issued only on written application from the exporter or his authorised representative.
4. The exporter or his authorised representative shall submit with his application any appropriate supporting documents proving that the products to be exported qualify for the issue of a certificate of origin Form A.
5. The certificate shall be issued by the competent governmental authorities of the beneficiary country if the products to be exported can be considered as products originating in that country within the meaning of Subsection 1. The certificate shall be made available to the exporter as soon as the export has taken place or is ensured.
6. For the purposes of verifying whether the conditions set out in paragraph 5 have been met, the competent governmental authorities shall have the right to call for any documentary evidence or to carry out any check which they consider appropriate.
7. It shall be the responsibility of the competent governmental authorities of the beneficiary country to ensure that certificates and applications are duly completed.
8. The completion of box 2 of the certificate of origin Form A shall be optional. Box 12 shall be duly completed by indicating ‘ European Community ’ or one of the Member States.
9. The date of issue of the certificate of origin Form A shall be indicated in box 11. The signature to be entered in that box, which is reserved for the competent governmental authorities issuing the certificate, shall be handwritten.
Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of general rule 2(a) of the Harmonised System and falling within Section XVI or XVII or heading No 7308 or 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities on importation of the first instalment.
Since the certificate of origin Form A constitutes the documentary evidence for the application of provisions concerning the tariff preferences referred to in Article 67, it shall be the responsibility of the competent governmental authorities of the exporting country to take any steps necessary to verify the origin of the products and to check the other statements on the certificate.
Proofs of origin shall be submitted to the customs authorities of the Member States of importation in accordance with the procedures laid down in Article 62 of the Code. The said authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the application of this section.
1. By way of derogation from Article 81(5), a certificate of origin Form A may exceptionally be issued after exportation of the products to which it relates, if:
(a) it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or
(b) it is demonstrated to the satisfaction of the competent governmental authorities that a certificate of origin Form A was issued but was not accepted at importation for technical reasons.
2. The competent governmental authorities may issue a certificate retrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding export file and that a certificate of origin Form A satisfying the provisions of this section was not issued when the products in question were exported.
3. Box 4 of certificates of origin Form A issued retrospectively must contain the endorsement ‘ Issued retrospectively ’ or ‘ Délivré a posteriori ’.
1. In the event of the theft, loss or destruction of a certificate of origin Form A, the exporter may apply, to the competent governmental authorities which issued it, for a duplicate to be made out on the basis of the export documents in their possession. Box 4 of a duplicate Form A issued in this way must be endorsed with the word ‘ Duplicate ’ or ‘ Duplicata ’, together with the date of issue and the serial number of the original certificate.
2. For the purposes of Article 90b, the duplicate shall take effect from the date of the original.
1. When originating products are placed under the control of a customs office in the Community, it shall be possible to replace the original proof of origin by one or more certificates of origin Form A for the purpose of sending all or some of these products elsewhere within the Community or to Switzerland or Norway. The replacement certificate(s) of origin Form A shall be issued by the customs office under whose control the products are placed.
2. The replacement certificate issued in application of paragraph 1 or Article 88 shall be regarded as the definitive certificate of origin for the products to which it refers. The replacement certificate shall be made out on the basis of a written request by the re-exporter.
3. The top right-hand box of the replacement certificate shall indicate the name of the intermediary country where it is issued.
Box 4 shall contain the words ‘ Replacement certificate ’ or ‘ [X1Cer-ti-fi-cat de remplacement ’ ,] as well as the date of issue of the original certificate of origin and its serial number.
The name of the re-exporter shall be given in box 1.
The name of the final consignee may be given in box 2.
[X1All particulars of] the re-exported products appearing on the original certificate shall be transferred to boxes 3 to 9.
[X1References to the] re-exporter's invoice shall be given in box 10.
The customs authorities which issued the replacement certificate shall endorse box 11. The responsibility of the authorities is confined to the issue of the replacement certificate. The particulars in box 12 concerning the country of origin and the country of destination shall be taken from the original certificate. This box shall be signed by the re-exporter. A re-exporter who signs this box in good faith shall not be responsible for the accuracy of the particulars entered on the original certificate.
4. The customs office which is requested to perform the operation referred to in paragraph 1 should note on the original certificate the weights, numbers and nature of the products forwarded and indicate thereon the serial numbers of the corresponding replacement certificate or certificates. It shall keep the original certificate for at least three years.
5. A photocopy of the original certificate may be annexed to the replacement certificate.
6. In the case of products which benefit from the tariff preferences referred to in Article 67, under a derogation granted in accordance with the provisions of Article 76, the procedure laid down in this Article shall apply only when such products are intended for the Community.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
Originating products within the meaning of this section shall be eligible on importation into the Community to benefit from the tariff preferences referred to in Article 67 on production of a replacement certificate of origin Form A issued by the customs authorities of Norway or Switzerland on the basis of a certificate of origin Form A issued by the competent governmental authorities of the beneficiary country, provided that the conditions laid down in Article 78 have been satisfied and provided that Norway or Switzerland assists the Community by allowing its customs authorities to verify the authenticity and accuracy of the certificates issued. The verification procedure laid down in Article 94 shall apply mutatis mutandis . The time limit laid down in Article 94(3) shall be extended to eight months.
1. The invoice declaration may be made out:
(a) by an approved Community exporter within the meaning of Article 90, or
(b) by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed EUR 6 000 , and provided that the assistance referred to in Article 81(1) shall apply to this procedure.
2. An invoice declaration may be made out if the products concerned can be considered as originating in the Community or in a beneficiary country, and fulfil the other requirements of this section.
3. The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the customs or other competent governmental authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this section.
4. An invoice declaration shall be made out by the exporter in either French or English by typing, stamping or printing on the invoice, the delivery note or any other commercial document, the declaration, the text of which appears in Annex 18. If the declaration is handwritten, it shall be written in ink in printed characters.
5. Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 90 shall not be required to sign such declarations provided that he gives the customs authorities a written undertaking that he accepts full responsibility for any invoice declaration which identifies him as if it had been signed in manuscript by him.
6. In the cases referred to in paragraph 1(b), the use of an invoice declaration shall be subject to the following special conditions:
(a) one invoice declaration shall be made out for each consignment;
(b) if the goods contained in the consignment have already been subject to verification in the exporting country by reference to the definition of ‘ originating products ’ , the exporter may refer to this check in the invoice declaration.
The provisions of the first subparagraph shall not exempt exporters from complying with any other formalities required under customs or postal regulations.
1. The customs authorities of the Community may authorise any exporter, hereinafter referred to as an ‘ approved exporter ’ , who makes frequent shipments of products originating in the Community within the meaning of Article 67(2), and who offers, to the satisfaction of the customs authorities, all guarantees necessary to verify the originating status of the products as well as the fulfilment of the other requirements of this section, to make out invoice declarations, irrespective of the value of the products concerned.
2. The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate.
3. The customs authorities shall grant [X1to the approved exporter] a customs authorisation number which shall appear on the invoice declaration.
4. The customs authorities shall monitor the use of the authorisation by the approved exporter.
5. The customs authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, does not fulfil the conditions referred to in paragraph 2 or otherwise makes improper use of the authorisation.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. Evidence of the originating status of Community products within the meaning of Article 67(2) shall be furnished by either:
(a) the production of [X1a movement certificate EUR.1 , a specimen of which is set out in Annex 21; or
(b) the production of a declaration as referred to in Article 89.
2. The exporter or his authorised representative shall enter ‘ GSP beneficiary countries ’ and ‘ EC ’ , or ‘ Pays bénéficiaires du SPG ’ and ‘ CE ’ , in box 2 of the movement certificate EUR.1.
3. The provisions of this section concerning the issue, use and subsequent verification of certificates of origin Form A shall apply mutatis mutandis to [X1movement certificates EUR.1 and, with the exception of the provisions concerning their issue, to invoice declarations.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. A proof of origin shall be valid for 10 months from the date of issue in the exporting country, and shall be submitted within the said period to the customs authorities of the importing country.
2. Proofs of origin which are submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying the tariff preferences referred to in Article 67, where the failure to submit these documents by the final date set is due to exceptional circumstances.
3. In other cases of belated presentation, the customs authorities of the importing country my accept the proofs of origin where the products have been submitted before the said final date.
4. At the request of the importer and having regard to the conditions laid down by the customs authorities of the importing Member State, a single proof of origin may be submitted to the customs authorities at the importation of the first consignment when the goods:
(a) are imported within the framework of frequent and continuous trade flows of a significant commercial value;
(b) are the subject of the same contract of sale, the parties of this contract established in the exporting country or in the Community;
(c) are classified in the same code (eight digits) of the Combined Nomenclature;
(d) come exclusively from the same exporter, are destined for the same importer, and are made the subject of entry formalities at the same customs office in the Community.
This procedure shall be applicable for the quantities and a period determined by the competent customs authorities. This period cannot, in any circumstances, exceed three months.
1. Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products benefiting from the tariff preferences referred to in Article 67 without requiring the presentation of a certificate of origin Form A or an invoice declaration, provided that such products are not imported by way of trade and have been declared as meeting the conditions required for the application of this section and where there is no doubt as to the veracity of such a declaration.
2. Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.
Furthermore, the total value of these products shall not exceed EUR 500 in the case of small packages or EUR 1 200 in the case of products forming part of travellers' personal luggage.
1. When Article 67(2), (3) or (4) applies, the competent governmental authorities of the beneficiary country called on to issue a certificate of origin Form A for products in the manufacture of which materials originating in the Community, Norway or Switzerland are used shall rely on the [X1movement certificate EUR.1 or, where necessary, the invoice declaration.
2. Box 4 of certificates of origin Form A issued in the cases set out in paragraph 1 shall contain the remark ‘ EC cumulation ’ , ‘ Norway cumulation ’ , ‘ Switzerland cumulation ’ , or ‘ Cumul CE ’ , ‘ Cumul Norvège ’ , ‘ Cumul Suisse ’ .
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
The discovery of slight discrepancies between the statements made in the certificate of origin Form A, in the movement certificate EUR.1 or in an invoice declaration, and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the certificate or declaration null and void if it is duly established that that document does correspond to the products submitted.
Obvious formal errors such as typing errors on a certificate of origin Form A, a movement certificate EUR.1 or an invoice declaration should not cause this document to be rejected if these errors are not such as to create doubts concerning the correctness of the statements made in that document.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. The beneficiary countries shall inform the Commission of the names and addresses of the governmental authorities situated in their territory which are empowered to issue certificates of origin Form A, together with specimen impressions of the stamps used by those authorities, and the names and addresses of the relevant governmental authorities responsible for the control of the certificates of origin Form A and the invoice declarations. The stamps shall be valid as from the date of receipt by the Commission of the specimens. The Commission shall forward this information to the customs authorities of the Member States. When these communications are made within the framework of an amendment of previous communications, the Commission shall indicate the date of entry into use of those new stamps according to the instructions given by the competent governmental authorities of the beneficiary countries. This information is for official use; however, when goods are to be released for free circulation, the customs authorities in question may allow the importer or his duly authorised representative to consult the specimen impressions of the stamps mentioned in this paragraph.
2. The Commission shall publish, in the Official Journal of the European Communities (‘C’ series), the date on which the new beneficiary countries referred to in Article 97 met the obligations set out in paragraph 1.
3. The Commission shall send, to the beneficiary countries, specimen impressions of the stamps used by the customs authorities of the Member States for the issue of movement certificates EUR.1 .
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
For the purposes of the provisions concerning the tariff preferences referred to in Article 67, every beneficiary country shall comply or ensure compliance with the rules concerning the origin of the products, the completion and issue of certificates of origin Form A, the conditions for the use of invoice declarations and those concerning methods of administrative cooperation.
1. Subsequent verifications of certificates of origin Form A and invoice declarations shall be carried out at random or whenever the customs authorities in the Community have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfilment of the other requirements of this section.
2. For the purposes of implementing the provisions of paragraph 1, the customs authorities in the Community shall return the certificate of origin Form A and the invoice, if it has been submitted, the invoice declaration, or a copy of these documents, to the competent governmental authorities in the exporting beneficiary country giving, where appropriate, the reasons for the enquiry. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification.
If the said authorities decide to suspend the granting of the tariff preferences referred to in Article 67 while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary.
3. When an application for subsequent verification has been made in accordance with paragraph 1, such verification shall be carried out and its results communicated to the customs authorities in the Community within a maximum of six months. The results shall be such as to establish whether the proof of origin in question applies to the products actually exported and whether these products can be considered as products originating in the beneficiary country or in the Community.
4. In the case of certificates of origin Form A issued in accordance with Article 91, the reply shall include a copy (copies) of the [X1movement certificate(s) EUR.1 or, where necessary, of the corresponding invoice declaration(s).
5. If in cases of reasonable doubt there is no reply within the six months specified in paragraph 3 or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, a second communication shall be [X1sent to] the competent authorities. If after the second communication the results of the verification are not communicated to the requesting authorities within four months, or if these results do not allow the authenticity of the document in question or the real origin of the products to be determined, the requesting authorities shall, except in exceptional circumstances, refuse entitlement to the tariff preferences.
The provisions of the first subparagraph shall apply between the countries of the same regional group for the purposes of the subsequent verification of the certificates of origin Form A issued in accordance with this section.
6. Where the verification procedure or any other available information appears to indicate that the provisions of this section are being contravened, the exporting beneficiary country shall, on its own initiative or at the request of the Community, carry out appropriate inquiries or arrange for such inquiries to be carried out with due urgency to identify and prevent such contraventions. For this purpose, the Community may participate in the inquiries.
7. For the purposes of the subsequent verification of certificates of origin Form A, copies of the certificates, as well as any export documents referring to them, shall be kept for at least three years by the competent governmental authorities of the exporting beneficiary country.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
Article 78(1)(c) and Article 88 shall apply only in so far as Norway and Switzerland, in the context of tariff preferences granted by them to certain products originating in developing countries, apply provisions similar to those of the Community.
The Commission shall inform the Member States' customs authorities of the adoption by Norway and Switzerland of such provisions and shall notify them of the date from which the provisions of Article 78(1)(c) and Article 88, and the similar provisions adopted by Norway and Switzerland, are applied.
These provisions shall apply on condition that the Community, Norway and Switzerland have concluded an agreement stating, among other things, that they shall provide each other with the necessary mutual assistance in matters of administrative cooperation.
1. The term ‘ Community ’ used in this section shall not cover Ceuta and Melilla. The term ‘ products originating in the Community ’ shall not cover products originating in Ceuta and Melilla.
2. This Section shall apply mutatis mutandis in determining whether products may be regarded as originating in the exporting beneficiary country benefiting from the generalised system of preferences when imported into Ceuta and Melilla or as originating in Ceuta and Melilla.
3. Ceuta and Melilla shall be regarded as a single territory.
4. The provisions of this section concerning the issue, use and subsequent verification of certificates of origin Form A shall apply mutatis mutandis to products originating in Ceuta and Melilla.
5. The Spanish customs authorities shall be responsible for the application of this section in Ceuta and Melilla.
When a country or territory is admitted or readmitted as a beneficiary country in respect of products referred to in the relevant Council Regulations or the ECSC Decision, goods originating in that country or territory may benefit from the generalised system of preferences on condition that they were exported from the beneficiary country or territory on or after the date referred to in Article 93(2).
[F91. For the purposes of the provisions concerning preferential tariff measures adopted unilaterally by the Community for certain countries, groups of countries or territories (hereinafter referred to as ‘ beneficiary countries or territories ’ ), with the exception of those referred to in Section 1 of this Chapter and the overseas countries and territories associated with the Community, the following products shall be considered as products originating in a beneficiary country or territory:]
(a) products wholly obtained in that [F9beneficiary country or territory with the meaning of Article 99;
(b) products obtained in that beneficiary country or territory , in the manufacture of which products other than those referred to in (a) are used, provided that the said products have undergone sufficient working or processing within the meaning of Article 100.
2. For the purposes of this section, products originating in the Community, within the meaning of paragraph 3, which are subject in a beneficiary country or territory to working or processing going beyond that described in Article 101 shall be considered as originating in that beneficiary country or territory] .
3. Paragraph 1 shall apply mutatis mutandis in establishing the origin of the products obtained in the Community.
1. The following shall be considered as wholly obtained in a [F9beneficiary country or territory or in the Community:
(a) mineral products extracted [X1from its soil or] from its seabed;
(b) vegetable products harvested there;
(c) live animals born and raised there;
(d) products from live animals raised there;
(e) products obtained by hunting or fishing conducted there;
(f) products of sea-fishing and other products taken from the sea outside the territorial waters by its vessels;
(g) products made on board its factory ships exclusively from the products referred to in (f);
(h) used articles collected there, fit only for the recovery of raw materials;
(i) waste and scrap resulting from manufacturing operations conducted there;
(j) products extracted from the seabed or below the seabed which is situated outside its territorial waters but where it has exclusive exploitation rights;
(k) goods produced there exclusively from products specified in (a) to (j).
2. The terms ‘ its vessels ’ and ‘ its factory ships ’ in paragraph 1(f) and (g) shall apply only to vessels and factory ships:
which are registered or recorded in the beneficiary country or territory or in a Member State,
which sail under the flag of a beneficiary country or territory or of a Member State,
which are owned to the extent of at least 50 % by nationals of the beneficiary country or territory or of Member States or by a company with its head office in that republic or in one of the Member States, of which the manager or managers, Chairman of the Board of Directors or of the Supervisory Board, and the majority of the members of such boards are nationals of that beneficiary country or territory or of the Member States and of which, in addition, in the case of companies, at least half the capital belongs to that beneficiary country or territory or to the Member States or to public bodies or nationals of that beneficiary country or territory or of the Member States,
of which the master and officers are nationals of the beneficiary country or territory or of the Member States, and
of which at least 75 % of the crew are nationals of the beneficiary country or territory or of the Member States.
3. The terms ‘ beneficiary country or territory ’ and ‘Community’ shall also cover the territorial waters of that republic or of the Member States.
4. Vessels operating on the high seas, including factory ships on which the fish caught is worked or processed, shall be considered as part of the territory of the beneficiary country or territory] or of the Member State to which they belong, provided that they satisfy the conditions set out in paragraph 2.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
For the purposes of Article 98, products which are not wholly obtained in a [F9beneficiary country or territory] or in the Community are considered to be sufficiently worked or processed when the conditions set out in the list in Annex 15 are fulfilled.
Those conditions indicate, for all products covered by this section, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials.
If a product which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.
[F81. Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 100 are satisfied:
(a) preserving operations to ensure that the products remain in good condition during transport and storage;
(b) breaking-up and assembly of packages;
(c) washing, cleaning; removal of dust, oxide, oil, paint or other coverings;
(d) ironing or pressing of textiles;
(e) simple painting and polishing operations;
(f) husking, partial or total milling, polishing and glazing of cereals and rice;
(g) operations to colour sugar or form sugar lumps; partial or total milling of sugar;
(h) peeling, stoning and shelling, of fruits, nuts and vegetables;
(i) sharpening, simple grinding or simple cutting;
(j) sifting, screening, sorting, classifying, grading, matching; (including the making-up of sets of articles);
(k) simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;
(l) affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;
(m) simple mixing of products, whether or not of different kinds, where one or more components of the mixtures do not meet the conditions laid down in this section to enable them to be considered as originating in a beneficiary country or territory or in the Community;
(n) simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;
(o) a combination of two or more of the operations specified in points (a) to (n);
(p) slaughter of animals.]
2. All the operations carried out in either a [F9beneficiary country or territory] or the Community on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.
Textual Amendments
1. The unit of qualification for the application of the provisions of this section shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.
Accordingly, it follows that:
(a) when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;
(b) when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Section.
2. Where, under general rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.
1. By way of derogation from the provisions of Article 100, non-originating materials may be used in the manufacture of a given product, provided that their total value does not exceed 10 % of the ex-works price of the product.
Where, in the list, one or several percentages are given for the maximum value of non-originating materials, such percentages must not be exceeded through the application of the first subparagraph.
2. Paragraph 1 shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.
Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle which are part of the normal equipment and included in the price thereof or which are [X1not separately invoiced, shall be regarded] as one with the piece of equipment, machine, apparatus or vehicle in question.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
Sets, as defined in general rule 3 of the Harmonised System, shall be regarded as originating when all the [X1component products are originating products] . Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
In order to determine whether a product is an originating product, it shall not be necessary to determine the origin of the following which might be used in its manufacture:
energy and fuel;
plant and equipment;
machines and tools;
goods which do not enter, and which are not intended to enter, into the final composition of the product.
The conditions set out in this section for acquiring originating status must continue to be fulfilled at all times in the [F9beneficiary country or territory or in the Community.
If originating products exported from the beneficiary country or territory] or from the Community to another country are returned, they shall be considered as non-originating unless it can be demonstrated to the satisfaction of the competent authorities that:
the products returned are the same as those which were exported, and
they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.
1. The following shall be considered as transported directly from the [F9beneficiary country or territory to the Community or from the Community to the beneficiary country or territory :
(a) products transported without passing through the territory of any other country;
(b) products constituting one single consignment transported through the territory of countries other than the beneficiary country or territory or the Community, with, should the occasion arise, trans-shipment or temporary warehousing in those countries, provided that the products remain under the surveillance of the customs authorities in the country of transit or of warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition;
(c) products which are transported by pipeline without interruption across a territory other than that of the exporting beneficiary country or territory] or of the Community.
2. Evidence that the conditions set out in paragraph 1(b) are fulfilled shall be supplied to the competent customs authorities by the production of:
(a) a single transport document covering the passage from the exporting country through the country of transit; [X1or]
(b) a certificate issued by the customs authorities of the country of transit:
(b) giving an exact description of the products,
stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used, and
certifying the conditions under which the products remained in the country of transit;
(c) or, failing these, any substantiating documents.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. Originating products, sent from a [F9beneficiary country or territory for exhibition in another country and sold after the exhibition for importation into the Community, shall benefit on importation from the tariff preferences referred to in Article 98, provided that they meet the requirements of this section entitling them to be recognised as originating in that beneficiary country or territory and provided that it is shown to the satisfaction of the competent Community customs authorities that:
(a) an exporter has consigned the products from the beneficiary country or territory] directly to the country in which the exhibition is held and has exhibited them there;
(b) the products have been sold or otherwise disposed of by that exporter to a person in the Community;
(c) the products have been consigned during the exhibition or immediately thereafter to the Community in the state in which they were sent for exhibition;
(d) the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.
2. [X1A movement certificate EUR.1 shall be submitted to the Community customs authorities in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the nature of the products and the conditions under which they have been exhibited may be required.
3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
Products originating in the [F9beneficiary country or territory] shall benefit from the tariff preferences referred to in Article 98, on submission of either:
a movement certificate EUR.1 , a specimen of which appears in Annex 21, or
in the cases specified in Article 116(1), a declaration, the text of which appears in Annex 22, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (hereinafter referred to as the ‘ inovice declaration ’ ).
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
[F91. Originating products within the meaning of this section shall be eligible, on importation into the Community, to benefit from the tariff preferences referred to in Article 98, provided that they have been transported direct to the Community within the meaning of Article 107, on submission of an EUR.1 movement certificate issued by the customs or other competent governmental authorities of a beneficiary country or territory, on condition 87 beneficiary country or territory:]
have communicated to the Commission the information required by Article 121, and
assist the Community by allowing the customs authorities of Member States to verify the authenticity of the document or the accuracy of the information regarding the true origin of the products in question.
2. A movement certificate EUR.1 may be issued only where it can serve as the documentary evidence required for the purposes of the tariff preferences [X1referred to in] Article 98.
3. A movement certificate EUR.1 shall be issued only on written application from the exporter or his authorised representative. Such application shall be made on a form, a specimen of which appears in Annex 21, which shall be completed in accordance with the provisions of this subsection.
Applications for movement certificates EUR.1 shall be kept for at least three years by the competent authorities of the exporting [F9beneficiary country or territory or Member State.
4. The exporter or his authorised representative shall submit with his application any appropriate supporting documents proving that the products to be exported qualify for the issue of a movement certificate EUR.1 .
The exporter shall undertake to submit, at the request of the competent authorities, any supplementary evidence they may require for the purpose of establishing the correctness of the originating status of the products eligible for preferential treatment and shall undertake to agree to any inspection of their accounts and to any check by the said authorities on the circumstances in which the products were obtained.
5. The movement certificate EUR.1 shall be issued by the competent governmental authorities of the beneficiary country or territory or by the customs authorities of the exporting Member State, if the products to be exported can be considered as originating products within the meaning of this section.
6. Since the movement certificate EUR.1 constitutes the documentary evidence for the application of the preferential arrangements set out in Article 98, it shall be the responsibility of the competent governmental authorities of the beneficiary country or territory or of the customs authorities of the exporting Member State to take any steps necessary to verify the origin of the products and to check the other statements on the certificate.
7. For the purpose of verifying whether the conditions set out in paragraph 5 have been met, the competent governmental authorities of the beneficiary country or territory or the customs authorities of the exporting member State shall have the right to call for any documentary evidence or to carry out any check which they consider appropriate.
8. It shall be the responsibility of the competent governmental authorities of the beneficiary country or territory or of the customs authorities of the exporting Member State to ensure that the forms referred to in paragraph 1 are duly completed.
9. The date of issue of the movement certificate EUR.1 shall be indicated in that part of the certificate reserved for the customs authorities.
10. A movement certificate EUR.1] shall be issued by the competent authorities of the beneficiary country or territory] or by the customs authorities of the exporting Member State when the products to which it relates are exported. It shall be made available to the exporter as soon as the export has taken place or is ensured.
Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of general rule 2(a) of the Harmonised System and falling within Section XVI or XVII or within heading No 7308 or 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities on importation of the first instalment.
Proofs of origin shall be submitted to the customs authorities of the Member State of importation in accordance with the procedures laid down in Article 62 of the Code. The said authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the application of this section.
1. By way of derogation from Article 110(10), a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:
(a) it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or
(b) it is demonstrated to the satisfaction of the competent authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons.
2. The competent authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application agrees with that in the corresponding export file and that a movement certificate EUR.1 satisfying the provisions of this section was not issued when the products in question were exported.
3. [X1Movement certificates EUR.1] issued retrospectively shall be endorsed with one of the following phrases:
‘ EXPEDIDO A POSTERIORI ’,
‘ UDSTEDT EFTERFØLGENDE ’,
‘ NACHTRÄGLICH AUSGESTELLT ’,
‘ ΕΚΔΟΘΕΝ ΕΚ ΤΩΝ ΥΣΤΕΡΩΝ ’,
‘ ISSUED RETROSPECTIVELY ’,
‘ DÉLIVRÉ A POSTERIORI ’,
‘ RILASCIATO A POSTERIORI ’,
‘ AFGEGEVEN A POSTERIORI ’,
‘ EMITIDO A POSTERIORI ’,
‘ ANNETTU JÄLKIKÄTEEN ’,
‘ UTFÄRDAT I EFTERHAND ’ [F3,]
‘ [F4VYSTAVENO DODATEČNĚ ’ ,
‘ VÄLJA ANTUD TAGASIULATUVALT ’ ,
‘ IZSNIEGTS RETROSPEKTĪVI ’ ,
‘ RETROSPEKTYVUSIS IŠDAVIMAS ’ ,
‘ KIADVA VISSZAMENŐLEGES HATÁLLYAL ’ ,
‘ MAħRUĠ RETROSPETTIVAMENT ’ ,
‘ WYSTAWIONE RETROSPEKTYWNIE ’ ,
‘ IZDANO NAKNADNO ’ ,
‘ [F6ИЗДАДЕН ВПОСЛЕДСТВИЕ ’ ,
‘ ELIBERAT ULTERIOR ’ .]
4. The endorsement referred to in paragraph 3 shall be inserted in the ‘Remarks’ box of the movement certificate EUR.1 .
Textual Amendments
F3 Substituted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F4 Inserted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F5 Substituted by Commission Regulation (EC) No 883/2005 of 10 June 2005 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Text with EEA relevance).
F6 Inserted by Commission Regulation (EC) No 1792/2006 of 23 October 2006 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement of persons, competition policy, agriculture (veterinary and phytosanitary legislation), fisheries, transport policy, taxation, statistics, social policy and employment, environment, customs union, and external relations by reason of the accession of Bulgaria and Romania.
F10 Substituted by Commission Regulation (EC) No 1792/2006 of 23 October 2006 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement of persons, competition policy, agriculture (veterinary and phytosanitary legislation), fisheries, transport policy, taxation, statistics, social policy and employment, environment, customs union, and external relations by reason of the accession of Bulgaria and Romania.
1. In the event of the theft, loss or destruction of a movement certificate EUR.1 , the exporter may apply to the competent authorities which issued it, for a duplicate to be made out on the basis of the export documents in their possession.
2. The duplicate issued in this way shall be endorsed with one of the following words:
‘ DUPLICADO ’,
‘ DUPLIKAT ’,
‘ DUPLIKAT ’,
‘ ΑΝΤΙΓΡΑΦΟ ’,
‘ DUPLICATE ’,
‘ DUPLICATA ’,
‘ DUPLICATO ’,
‘ DUPLICAAT ’,
‘ SEGUNDA VIA ’,
‘ KAKSOISKAPPALE ’,
‘ DUPLIKAT ’ [F3,]
‘ [F4DUPLIKÁT ’ ,
‘ DUPLIKAAT ’ ,
‘ DUBLIKĀTS ’ ,
‘ DUBLIKATAS ’ ,
‘ MÁSODLAT ’ ,
‘ DUPLIKAT ’ ,
‘ DUPLIKAT ’ ,
‘ DVOJNIK ’ ,
‘ DUPLIKÁT ’ [F10,] ]
‘ [F6ДУБЛИКАТ ’ ,
‘ DUPLICAT ’ .]
3. The endorsement referred to in paragraph 2 shall be inserted in the ‘Remarks’ box of the movement certificate EUR.1 .
4. The duplicate, which shall bear the date of issue of the original movement certificate EUR.1] , shall take effect as from that date.
Textual Amendments
F3 Substituted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F4 Inserted by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded.
F6 Inserted by Commission Regulation (EC) No 1792/2006 of 23 October 2006 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement of persons, competition policy, agriculture (veterinary and phytosanitary legislation), fisheries, transport policy, taxation, statistics, social policy and employment, environment, customs union, and external relations by reason of the accession of Bulgaria and Romania.
F10 Substituted by Commission Regulation (EC) No 1792/2006 of 23 October 2006 adapting certain regulations and decisions in the fields of free movement of goods, freedom of movement of persons, competition policy, agriculture (veterinary and phytosanitary legislation), fisheries, transport policy, taxation, statistics, social policy and employment, environment, customs union, and external relations by reason of the accession of Bulgaria and Romania.
When originating products are placed under the control of a customs office in the Community, it shall be possible to replace the original proof of origin by one or more movement certificates EUR.1 for the purpose of sending all or some of those products elsewhere in the Community. The replacement movement certificate(s) EUR.1] shall be issued by the customs office under whose control the products are placed.
1. The invoice declaration may be made out:
(a) by an approved Community exporter within the meaning of Article 117, or
(b) by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed EUR 6 000 , and on condition that the assistance referred to in Article 110(1) shall apply to this procedure.
2. An invoice declaration may be made out if the products concerned can be considered as originating in the Community or in a [F9beneficiary country or territory] and fulfil the other requirements of this section.
3. The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the customs or other competent governmental authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this section.
4. An invoice declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or any other commercial document, the declaration, the text of which appears in Annex 22, using one of the linguistic versions set out in that Annex and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink, in printed characters.
5. Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 117 shall not be required to sign such declarations provided that he gives the customs authorities a written undertaking that he accepts full responsibility for any invoice declaration which identifies him as if it had been signed in manuscript by him.
6. In the cases referred to in paragraph 1(b), the use of an invoice declaration shall be subject to the following special conditions:
(a) an invoice declaration shall be made out for each consignment;
(b) if the goods contained in the consignment have already been subject to verification in the exporting country by reference to the definition of ‘ originating products ’ , the exporter may refer to this check in the invoice declaration.
The provisions of the first subparagraph shall not exempt exporters from complying with any other formalities required under customs or postal regulations.
1. The customs authorities in the Community may authorise any exporter, hereinafter referred to as an ‘ approved exporter ’ , who makes frequent shipments of products originating in the Community within the meaning of Article 98(2), and who offers, to the satisfaction of the customs authorities, all guarantees necessary to verify the originating status of the products as well as the fulfilment of the other requirements of this section, to make out invoice declarations, irrespective of the value of the products concerned.
2. The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate.
3. The customs authorities shall assign the approved exporter a customs authorisation number which shall appear on the invoice declaration.
4. The customs authorities shall monitor the use of the authorisation by the approved exporter.
5. The customs authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, does not fulfil the conditions referred to in paragraph 2, or otherwise makes improper use of the authorisation.
1. A proof of origin shall be valid for four months from the date of issue in the exporting country, and shall be submitted within the said period to the customs authorities of the importing country.
2. Proofs of origin which are submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying the tariff preferences referred to in Article 98, where the failure to submit these documents by the final date set is due to exceptional circumstances.
3. In other cases of belated presentation, the customs authorities of the importing country may accept the proofs of origin where the products have been submitted before the said final date.
4. At the request of the importer and having regard to the conditions laid down by the customs authorities of the importing Member State, a single proof of origin may be submitted to the customs authorities at the importation of the first consignment when the goods:
(a) are imported within the framework of frequent and continuous trade flows of a significant commercial value;
(b) are the subject of the same contract of sale, the parties of this contract established in the exporting country or in the Community;
(c) are classified in the same code (eight digits) of the Combined Nomenclature;
(d) come exclusively from the same exporter, are destined for the same importer, and are made the subject of entry formalities at the same customs office in the Community.
This procedure shall be applicable for the quantities and a period determined by the competent customs authorities. This period cannot, in any circumstances, exceed three months.
1. Products sent as small packages from private person to private persons or forming part of travellers' personal luggage shall be admitted as originating products benefiting from the tariff preferences referred to in Article 98 without requiring the submission of a movement certificate EUR.1] or an invoice declaration, provided that such products are not imported by way of trade and have been declared as meeting the conditions required for the application of this section, and where there is no doubt as to the veracity of such a declaration.
2. Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.
Furthermore, the total value of the products shall not exceed EUR 500 in the case of small packages or EUR 1 200 in the case of products forming part of traveller's personal luggage.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that that document does correspond to the products submitted.
Obvious formal errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the correctness of the statements made in that document.
1. The [F9beneficiary countries or territories shall inform the Commission of the names and addresses of the governmental authorities situated in their territory which are empowered to issue movement certificates EUR.1 , together with specimen impressions of the stamps used by those authorities, and the names and addresses of the relevant governmental authorities responsible for the control of the movement certificates EUR.1 and the invoice declarations. The stamps shall be valid as from the date of receipt by the Commission of the specimens. The Commission shall forward this information to the customs authorities of the Member States. When these communications are made within the framework of an amendment of previous communications, the Commission shall indicate the date of entry into use of those new stamps according to the instructions given by the competent governmental authorities of the beneficiary countries or territories . This information is for official use; however, when goods are to be released for free circulation, the customs authorities in question may allow the importer or his duly-authorised representative to consult the specimen impressions of stamps mentioned in this paragraph.
2. The Commission shall send, to the beneficiary countries or territories] , the specimen impressions of the stamps used by the customs authorities of the Member States for the issue of movement certificates EUR.1 .
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. Subsequent verifications of movement certificates EUR.1 and of invoice declarations shall be carried out at random or whenever the customs authorities in the importing Member State or the competent governmental authorities of the [F9beneficiary countries or territories] have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfilment of the other requirements of this section.
2. For the purposes of implementing the provisions of paragraph 1, the competent authorities in the importing Member State or [F9beneficiary country or territory shall return the EUR. 1 movement certificate and the invoice, if it has been submitted, the invoice declaration, or a copy of these documents, to the competent authorities in the exporting beneficiary country or territory or Member State, giving, where appropriate, the reasons for the enquiry. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification.
If the customs authorities in the importing Member State decide to suspend the granting of the tariff preferences referred to in Article 98 while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary.
3. When an application for subsequent verification has been made in accordance with paragraph 1, such verification shall be carried out and its results communicated to the customs authorities of the importing Member States or to the competent governmental authorities of the importing beneficiary country or territory within a maximum of six months. The results shall be such as to establish whether the proof of origin in question applies to the products actually exported and whether these products can be considered as originating in the beneficiary country or territory or in the Community.
4. If in cases of reasonable doubt there is no reply within the six months specified in paragraph 3 or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, a second communication shall be sent to the competent authorities. If after the second communication the results of the verification are not communicated to the requesting authorities within four months, or if these results do not allow the authenticity of the document in question or the real origin of the products to be determined, the requesting authorities shall, except in exceptional circumstances, refuse entitlement to the tariff preferences.
5. Where the verification procedure or any other available information appears to indicate that the provisions of this section are being contravened, the exporting beneficiary country or territory shall, on its own initiative or at the request of the Community, carry out appropriate inquiries or arrange for such inquiries to be carried out with due urgency to identify and prevent such contraventions. For this purpose, the Community may participate in the inquiries.
6. For the purposes of the subsequent verification of movement certificates EUR.1 , copies of the certificates as well as any export documents referring to them shall be kept for at least three years by the competent governmental authorities of the exporting beneficiary country or territory] or by the customs authorities of the exporting Member State.
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
1. The term ‘Community’ used in this section shall not cover Ceuta and Melilla. The term ‘products originating in the Community’ [X1shall not cover] products originating in Ceuta and Melilla.
2. This section shall apply mutatis mutandis in determining whether products may be regarded as originating in the exporting [F9beneficiary countries or territories] benefiting from the preferences when imported into Ceuta and Melilla or as originating in Ceuta and Melilla.
3. Ceuta and Melilla shall [X1be regarded as] a single territory.
4. The provisions of this section concerning the issue, use and subsequent verification of movement certificates EUR.1] shall apply mutatis mutandis to products originating in Ceuta and Melilla.
5. The Spanish customs authorities shall be responsible for the application of this section in Ceuta and Melilla.]
Editorial Information
X1 Substituted by Corrigendum to Commission Regulation (EC) No 1602/2000 of 24 July 2000 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code (Official Journal of the European Communities L 188 of 26 July 2000).
Textual Amendments
F9 Substituted by Commission Regulation (EC) No 444/2002 of 11 March 2002 amending Regulation (EEC) No 2454/93 laying down provisions for the implementation of Council Regulation (EEC) No 2913/92 establishing the Community Customs Code and Regulations (EC) No 2787/2000 and (EC) No 993/2001 (Text with EEA relevance).
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Regulation without Annexes you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Regulation without Annexes you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Regulation you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys