xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

CHAPTER IIU.K.OBLIGATIONS

Article 6U.K.Hazard analysis and critical control points (HACCP) system

1.Feed business operators carrying out operations other than those referred to in Article 5(1) shall put in place, implement and maintain, a permanent written procedure or procedures based on the HACCP principles.

2.The principles referred to in paragraph 1 are the following:

(a)identify any hazards that must be prevented, eliminated or reduced to acceptable levels;

(b)identify the critical control points at the step or steps at which control is essential to prevent or eliminate a hazard or reduce it to acceptable levels;

(c)establish critical limits at critical control points which separate acceptability from unacceptability, for the prevention, elimination or reduction of identified hazards;

(d)establish and implement effective monitoring procedures at critical control points;

(e)establish corrective action when monitoring indicates that a critical control point is not under control;

(f)establish procedures to verify that the measures outlined in points (a) to (e) are complete and working effectively. Verification procedures shall be carried out regularly;

(g)establish documents and records commensurate with the nature and size of the feed businesses to demonstrate the effective application of the measures set out in points (a) to (f).

3.When any modification is made in a product, process or any stage of production, processing, storage and distribution, feed business operators shall review their procedure and make the necessary changes.

4.As part of the system of procedures referred to in paragraph 1, feed business operators may use guides to good practice in conjunction with guides on the application of HACCP F1...

[F25.Measures to facilitate the implementation of this Article, including for small businesses, may be prescribed by the appropriate authority.]