Regulation (EC) No 1013/2006 of the European Parliament and of the CouncilDangos y teitl llawn

ANNEX III U.K. LIST OF WASTES SUBJECT TO THE GENERAL INFORMATION REQUIREMENTS LAID DOWN IN ARTICLE 18(‘GREEN’ LISTED WASTE)(1)

Regardless of whether or not wastes are included on this list, they may not be subject to the general information requirements laid down in Article 18 if they are contaminated by other materials to an extent which

(a)

increases the risks associated with the wastes sufficiently to render them appropriate for submission to the procedure of prior written notification and consent, when taking into account the hazardous characteristics listed in Annex III to Directive 91/689/EEC; or

(b)

prevents the recovery of the wastes in an environmentally sound manner.

Part I U.K.

The following wastes will be subject to the general information requirements laid down in Article 18:

Wastes listed in Annex IX to the Basel Convention(2).

For the purposes of this Regulation:

(a)

any reference to list A in Annex IX to the Basel Convention shall be understood as a reference to Annex IV to this Regulation;

(b)

in Basel entry B1020, the term ‘bulk finished form’ includes all metallic non-dispersible(3) forms of the scrap listed therein.

(c)

the part of Basel entry B1100 that refers to ‘Slags from copper processing’ etc., does not apply and (OECD) entry GB040 in Part II applies instead;

(d)

Basel entry B1110 does not apply and (OECD) entries GC010 and GC020 in Part II apply instead.

(e)

Basel entry B2050 does not apply and (OECD) entry GG040 in Part II applies instead;

(f)

the reference in Basel entry B3010 to fluorinated polymer wastes shall be deemed to include polymers and co-polymers of fluorinated ethylene (PTFE).

Part II U.K.

The following wastes will also be subject to the general information requirements laid down in Article 18:

Metal bearing wastes arising from melting, smelting and refining of metals U.K.

GB040

7112 262030 262090

Slags from precious metals and copper processing for further refining

Other wastes containing metals U.K.

GC010		Electrical assemblies consisting only of metals or alloys
GC020		Electronic scrap (e.g. printed circuit boards, electronic components, wire, etc.) and reclaimed electronic components suitable for base and precious metal recovery
GC030	ex 890800	Vessels and other floating structures for breaking up, properly emptied of any cargo and other materials arising from the operation of the vessel which may have been classified as a dangerous substance or waste
GC050		Spent fluid catalytic cracking (FCC) catalysts (e.g. aluminium oxide, zeolites)

Glass waste in non-dispersible form U.K.

GE020

ex 7001 ex 701939

Glass fibre waste

Ceramic wastes in non-dispersible form U.K.

GF010

Ceramic wastes which have been fired after shaping, including ceramic vessels (before and/or after use)

Other wastes containing principally inorganic constituents, which may contain metals and organic materials U.K.

GG030	ex 2621	Bottom ash and slag tap from coal fired power plants
GG040	ex 2621	Coal fired power plants fly ash

Solid plastic wastes U.K.

GH013

391530 ex 390410—40

Polymers of vinyl chloride

Wastes arising from tanning and fellmongery operations and leather use U.K.

GN010	ex 050200	Waste of pigs', hogs' or boars' bristles and hair or of badger hair and other brush making hair
GN020	ex 050300	Horsehair waste, whether or not put up as a layer with or without supporting material
GN030	ex 050590	Waste of skins and other parts of birds, with their feathers or down, of feathers and parts of feathers (whether or not with trimmed edges) and down, not further worked than cleaned, disinfected or treated for preservation

(1)

This list originates from the OECD Decision, Appendix 3.

(2)

Annex IX to the Basel Convention is listed in this Regulation in Annex V, Part 1, List B.

(3)

‘Non-dispersible’ does not include any wastes in the form of powder, sludge, dust or solid items containing encased hazardous waste liquids.