Regulation (EC) No 1907/2006 of the European Parliament and of the CouncilDangos y teitl llawn

Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (Text with EEA relevance)

[X1 Article 17 U.K. Registration of on-site isolated intermediates

1. Any manufacturer of an on-site isolated intermediate in quantities of one tonne or more per year shall submit a registration to the Agency for the on-site isolated intermediate.

2. A registration for an on-site isolated intermediate shall include all the following information, to the extent that the manufacturer is able to submit it without any additional testing:

(a) the identity of the manufacturer as specified in Section 1 of Annex VI;

(b) the identity of the intermediate as specified in Sections 2.1 to 2.3.4 of Annex VI;

(c) the classification of the intermediate as specified in Section 4 of Annex VI;

(d) any available existing information on physicochemical, human health or environmental properties of the intermediate. Where a full study report is available, a study summary shall be submitted;

(e) a brief general description of the use, as specified in Section 3.5 of Annex VI;

(f) details of the risk management measures applied.

Except in cases covered under Article 25(3) [F1or Article 27(6)] , the registrant shall be in legitimate possession of or have permission to refer to the full study report summarised under (d) for the purpose of registration.

The registration shall be accompanied by the fee required in accordance with Title IX.

3. Paragraph 2 shall apply only to on-site isolated intermediates if the manufacturer confirms that the substance is only manufactured and used under strictly controlled conditions in that it is rigorously contained by technical means during its whole lifecycle. Control and procedural technologies shall be used to minimise emission and any resulting exposure.

If these conditions are not fulfilled, the registration shall include the information specified in Article 10. ]

Editorial Information

Textual Amendments