ANNEX IU.K.STANDARD QUALITIES
POINT IStandard quality for sugar beetU.K.
Standard quality beet shall:
be of sound and fair merchantable quality;
have a sugar content of 16 % at the reception point.
POINT IIStandard quality for white sugarU.K.
White sugar of the standard quality shall have the following characteristics:
be of sound, genuine and merchantable quality; dry, in homogeneous granulated crystals, free-flowing;
minimum polarisation: 99,7°;
maximum moisture content: 0,06 %;
maximum invert sugar content: 0,04 %;
the number of points determined under paragraph 2 shall not exceed a total of 22, nor:
15 for the ash content,
9 for the colour type, determined using the method of the Brunswick Institute of Agricultural Technology (hereinafter referred to as ‘the Brunswick method’),
6 for the colouring of the solution, determined using the method of the International Commission for Uniform Methods of Sugar Analysis (hereinafter referred to as ‘the ICUMSA method’).
One point shall correspond to:
0,0018 % of ash content determined using the ICUMSA method at 28° Brix,
0,5 units of colour type determined using the Brunswick method,
7,5 units of colouring of the solution determined using the ICUMSA method.
The methods for determining the factors referred to in paragraph 1 shall be those used for determining those factors under the intervention measures.
POINT IIIStandard quality for raw sugarU.K.
Raw sugar of the standard quality shall be sugar with a yield in white sugar of 92 %.
The yield of raw beet sugar shall be calculated by subtracting from the degree of polarisation of that sugar:
its percentage ash content multiplied by four;
its percentage invert sugar content multiplied by two;
the number 1.
The yield of raw cane sugar shall be calculated by subtracting 100 from the degree of polarisation of that sugar multiplied by two.