Article 1Objective
This Regulation establishes the rules for the Community energy-efficiency labelling programme for office equipment (hereinafter referred to as the Energy Star programme) as defined in the Agreement.
Article 2Scope
This Regulation shall apply to the office equipment product groups defined in Annex C to the Agreement, subject to any amendment thereof in accordance with Article XII of the Agreement.
Article 3Definitions
For the purposes of this Regulation the following definitions shall apply:
‘Common Logo’ shall mean the mark depicted in Annex A to the Agreement;
‘programme participants’ shall mean manufacturers, assemblers, exporters, importers, retailers and other persons or bodies that commit themselves to promoting designated energy-efficient office equipment products that meet the Common Specifications defined in point (c) and that have chosen to participate in the Energy Star programme by having registered with the Commission;
‘Common Specifications’ shall mean the energy-efficiency and performance requirements, including testing methods, used to determine qualification of energy-efficient office equipment products for the Common Logo.
Article 4General principles
1.The Energy Star programme shall be coordinated, as appropriate, with other Community labelling or quality certification arrangements as well as with schemes such as, in particular, the Community eco-label award scheme, established by Regulation (EEC) No 880/92, the indication by labelling and standard product information of the consumption of energy and other resources by household appliances, established by Directive 92/75/EEC and measures implementing Directive 2005/32/EC.
2.The Common Logo may be used by programme participants on their individual office equipment products and on associated promotional material.
3.Participation in the Energy Star programme shall be on a voluntary basis.
4.Office equipment products for which use of the Common Logo has been granted by USEPA shall be deemed to comply with this Regulation, unless there is evidence to the contrary.
5.Without prejudice to any Community rules on conformity assessment and conformity marking and/or to any international agreement concluded between the Community and third countries as regards access to the Community market, products covered by this Regulation which are placed on the Community market may be tested by the Commission or Member States in order to verify their compliance with the requirements of this Regulation.
Article 5Registration of programme participants
1.Applications to become a programme participant shall be submitted to the Commission.
2.The decision to authorise an applicant to become a programme participant shall be taken by the Commission, after verifying that the applicant has agreed to comply with the Common Logo user guidelines contained in Annex B to the Agreement. The Commission shall publish on the Energy Star web site and shall regularly send to the Member States an updated list of programme participants.
Article 6Promotion of energy-efficiency criteria
For the duration of the Agreement, the Commission and the other Community institutions, as well as central government authorities within the meaning of Directive 2004/18/EC of the European Parliament and of the Council of 31 March 2004 on the coordination of procedures for the award of public works contracts, public supply contracts and public service contracts(1), shall, without prejudice to Community and national law and economic criteria, specify energy-efficiency requirements not less demanding than the Common Specifications for public supply contracts having a value equal to or greater than the thresholds laid down in Article 7 of that Directive.
Article 7Other voluntary energy-efficiency labelling schemes
1.Other existing and new voluntary energy-efficiency labelling schemes for office equipment products in the Member States may co-exist with the Energy Star programme.
2.The Commission and the Member States shall act in order to ensure the necessary coordination between the Energy Star programme and national labelling schemes and other labelling schemes in the Community or in the Member States.
Article 8European Community Energy Star Board
1.The Commission shall establish a European Community Energy Star Board (ECESB) consisting of national representatives as referred to in Article 9 and representatives of interested parties. The ECESB shall review the implementation of the Energy Star programme within the Community and shall provide the Commission with advice and assistance, as appropriate, to enable it to carry out its role as Management Entity, as referred to in Article IV of the Agreement.
2.The Commission shall ensure that, to the extent possible in the conduct of its activities, the ECESB observes, in respect of each office equipment product group, the balanced participation of all relevant interested parties concerned with that product group, such as manufacturers, retailers, importers, environmental protection groups and consumer organisations.
3.The Commission, assisted by the ECESB, shall monitor the market penetration of products bearing the Common Logo and developments in the energy efficiency of office equipment, with a view to the timely revision of the Common Specifications.
4.The Commission shall establish the ECESB's rules of procedure, taking account of the views of national representatives in the ECESB.
Article 9National representatives
Each Member State shall designate, as appropriate, national energy policy experts, authorities or persons (hereinafter referred to as national representatives) responsible for carrying out the tasks provided for in this Regulation. Where more than one national representative is designated, the Member State shall determine those representatives' respective powers and the coordination requirements applicable to them.
Article 10Work plan
In accordance with the objective set out in Article 1, the Commission shall establish a work plan. The work plan shall include a strategy for the development of the Energy Star programme, which shall set out for the subsequent three years:
the objectives for energy-efficiency improvement, bearing in mind the need to pursue a high standard of consumer and environmental protection and the market penetration which the Energy Star programme should seek to achieve at Community level;
a non-exhaustive list of office equipment products which should be considered as priorities for inclusion in the Energy Star programme;
educational and promotional initiatives;
proposals for coordination and cooperation between the Energy Star programme and other voluntary energy-efficiency labelling schemes in Member States.
The Commission shall review its work plan at least once a year and make it publicly available.
Article 11Preparatory procedures for the revision of technical criteria
1.With a view to preparing for the revision of the Common Specifications and of the office equipment product groups covered by Annex C to the Agreement, and before submitting a draft proposal or replying to USEPA in accordance with the procedures laid down in the Agreement and in Council Decision 2006/1005/EC of 18 December 2006 concerning conclusion of the Agreement between the Government of the United States of America and the European Community on the coordination of energy-efficiency labelling programmes for office equipment(2), the steps set out in paragraphs 2 to 5 shall be taken.
2.The Commission may request the ECESB to make a proposal for the revision of the Agreement or of the Common Specifications for a product. The Commission may make a proposal to the ECESB for the revision of the Common Specifications for a product or the Agreement. The ECESB may also make a proposal to the Commission on its own initiative.
3.The Commission shall consult the ECESB whenever it receives a proposal for revision of the Agreement from USEPA.
4.When giving their views to the Commission, the members of the ECESB shall take into account the results of feasibility and market studies and available technology for reducing energy consumption.
5.The Commission shall take particular account of the objective of setting Common Specifications at an ambitious level, as provided for in Article I, paragraph 3, of the Agreement, with the aim of reducing energy consumption and shall have due regard for the technology available and the associated costs. In particular, the ECESB shall, before giving its views on any new Common Specifications, take into account the latest results of eco-design studies.
Article 12Market surveillance and control of abuse
1.The Common Logo shall be used only in connection with the products covered by the Agreement and in accordance with the Common Logo user guidelines contained in Annex B to the Agreement.
2.Any false or misleading advertising or use of any label or logo which leads to confusion with the Common Logo shall be prohibited.
3.The Commission shall ensure proper use of the Common Logo by undertaking or coordinating action described in Article IX, paragraphs 2, 3 and 4, of the Agreement. Member States shall take action as appropriate to ensure conformity with the provisions of this Regulation in their own territory and shall inform the Commission. Member States may refer evidence of non-compliance by programme participants to the Commission for initial action.
Article 13Review
One year before the expiry of the Agreement, the Commission shall produce and submit to the European Parliament and the Council a report monitoring the energy efficiency of the office equipment market in the Community and evaluating the effectiveness of the Energy Star programme. The report shall include qualitative as well as quantitative data and also data on the benefits derived from the Energy Star programme, namely energy savings and environmental benefits in terms of carbon dioxide emission reductions.
Article 14Revision
Before the Parties to the Agreement discuss its renewal in accordance with Article XIV, paragraph 2 thereof, the Commission shall assess the Energy Star programme in the light of the experience gained during its operation.
Article 15Repeal
Regulation (EC) No 2422/2001 is hereby repealed.
References made to the repealed Regulation shall be construed as being made to this Regulation and shall be read in accordance with the correlation table in the Annex.
Article 16Final provisions
This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Strasbourg, 15 January 2008.
For the European Parliament
The President
H.-G. Pöttering
For the Council
The President
J. Lenarčič