- Y Diweddaraf sydd Ar Gael (Diwygiedig)
- Pwynt Penodol mewn Amser (31/12/2020)
- Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE)
Commission Regulation (EC) No 517/2008 of 10 June 2008 laying down detailed rules for the implementation of Council Regulation (EC) No 850/98 as regards the determination of the mesh size and assessing the thickness of twine of fishing nets
Pan adawodd y DU yr UE, cyhoeddodd legislation.gov.uk ddeddfwriaeth yr UE a gyhoeddwyd gan yr UE hyd at ddiwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.). Ar legislation.gov.uk, mae'r eitemau hyn o ddeddfwriaeth yn cael eu diweddaru'n gyson ag unrhyw ddiwygiadau a wnaed gan y DU ers hynny.
Mae legislation.gov.uk yn cyhoeddi fersiwn y DU. Mae EUR-Lex yn cyhoeddi fersiwn yr UE. Mae Archif Gwe Ymadael â’r UE yn rhoi cipolwg ar fersiwn EUR-Lex o ddiwrnod cwblhau’r cyfnod gweithredu (31 Rhagfyr 2020 11.00 p.m.).
Point in time view as at 31/12/2020.
There are currently no known outstanding effects by UK legislation for Commission Regulation (EC) No 517/2008.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
This Regulation lays down detailed rules for the implementation of Regulation (EC) No 850/98 as regards the determination of the mesh size and the assessment of the twine thickness of fishing nets by F1... inspectors.
Textual Amendments
F1Words in Art. 1 omitted (31.12.2020) by virtue of The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(2); 2020 c. 1, Sch. 5 para. 1(1)
For the purpose of this Regulation, the following definitions shall apply:
‘mesh gauge’ means a mesh measurement gauge with two jaws, which automatically applies longitudinal forces, in the range of 5 to 180 Newton (N) to the meshes with a precision of 1 N;
‘active gear’ means any fishing gear for which the catch operation requires an active movement of the gear, including in particular towed gears, encircling gears, trawls, Danish seines and similar towed nets;
‘passive gear’ means any fishing gear for which the catch operation does not require an active movement of the gear, and includes gillnets, entangling nets, trammel nets, trap-nets, lines, pots and traps;
‘N-direction’ for knotted netting means the direction at right angles to the general course of the netting yarn, as shown in Annex I;
‘T-direction’ means:
for knotted netting: the direction parallel to the general course of the netting yarn, as shown in Annex I;
for knotless netting: the direction at right angle to N-direction;
‘mesh size’ means:
for knotted netting: the longest distance between two opposite knots in the same mesh when fully extended as shown in Annex I;
for knotless netting: the inside distance between the opposite joints in the same mesh when fully extended along its longest possible axis;
‘diamond mesh’ means a mesh as shown in figure 1 of Annex II, composed of four bars of the same length where the two diagonals of the mesh are perpendicular and one diagonal is parallel to the longitudinal axis of the net as shown in figure 2 of Annex II;
‘square mesh’ means a quadrilateral mesh composed of two sets of parallel bars of the same length, where one set is parallel to, and the other is at right angles to the longitudinal axis of the net;
‘T90 mesh’ means a diamond mesh from knotted netting, as shown in figure 1 of Annex II, mounted so that the T-direction of the netting is parallel to the longitudinal axis of the net.
1.[F2Inspectors] shall use the mesh gauge and twine thickness gauges which comply with the provisions of this Regulation for the determination of the mesh size and the twine thickness of fishing nets when conducting fishery inspections.
2.The technical specifications applying to the mesh gauge are set out in Annex III.
3.The technical specifications applying to twine thickness gauges are set out in Annex IV.
4.The mesh gauge and twine thickness gauges referred to in paragraph 1 shall be marked ‘EC gauge’ and certified by the manufacturer as complying with the technical specification referred in paragraphs 2 and 3 respectively.
5.The mesh gauge and twine thickness gauges sold or distributed for use by entities or persons other than [F3the competent authorities of a fisheries administration] shall not be marked ‘EC gauge’.
Textual Amendments
F2Word in Art. 3(1) substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(3)(a); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in Art. 3(5) substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(3)(b); 2020 c. 1, Sch. 5 para. 1(1)
[F4A fisheries administration must ensure that the calibrated test weights] and calibrated test measuring plate provided for in figure 1 of Annex V [F5are] certified by the [F6appropriate certification authority] and marked ‘EC’.
Textual Amendments
F4Words in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(a); 2020 c. 1, Sch. 5 para. 1(1)
F5Word in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(b); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(c) (as amended by S.I. 2019/1312, regs. 1(2), 9(3)(a)); 2020 c. 1, Sch. 5 para. 1(1)
The accuracy of the mesh gauge shall be verified by:
inserting the jaws of the gauge into slots of the calibrated test plate as provided for in figure 1 of Annex V;
hanging the calibrated test weights on the fixed jaw, as provided for in figure 2 of Annex V.
1.The inspector shall select a series of 20 consecutive meshes from the net, chosen in the following direction:
(a)for diamond and square meshes, in the direction of the longitudinal axis of the net;
(b)for T90 meshes, perpendicular to the direction of the longitudinal axis of the net.
2.Meshes less than three meshes from the selvedge, lacings, ropes or cod line shall not be measured. That distance shall be measured perpendicular to the lacings, ropes or cod line with the net stretched in the direction of that measurement. Meshes which are broken or have been repaired or have attachments to the net fixed at that mesh shall not be measured.
3.By way of derogation from paragraph 1, the meshes to be measured need not to be consecutive if the application of paragraph 2 prevents it.
1.The inspector shall select 20 meshes from the fishing net. In the case of different mesh sizes in the fishing net, the meshes shall be selected from the part of the fishing net having the smallest meshes.
2.When selecting meshes in accordance with paragraph 1, the following meshes shall not be included:
(a)meshes at the top, bottom or side of a net selvedge;
(b)meshes within three meshes of lacings and ropes;
(c)meshes that have been broken or have been repaired.
The mesh gauge shall be:
prepared in accordance with Annex VI;
operated in accordance with Annex VII.
When measuring diamond and T90 meshes in:
knotted and knotless netting when the N-direction can be determined, the netting shall be stretched in the N-direction of the meshes, as shown in Annex VII;
knotless netting when the N-direction cannot be determined, the longest axis of the mesh shall be measured.
1.When measuring a square mesh panel, the netting shall be stretched first in one diagonal direction and then in the other diagonal direction of the mesh, as shown in Annex VIII.
2.The procedure laid down in Annex VI shall apply to the measurement of each diagonal direction of the square mesh.
Meshes shall be measured only when wet and unfrozen.
1.The size of each mesh shall be the distance between the outside edges of the jaws of the gauge at the point where the movable jaw is stopped.
2.Where there is a difference in measurement between the diagonals of an individual square mesh, then the larger diagonal shall be used.
The mesh size of the net shall be determined as the mean value, displayed by the gauge, of the series of 20 selected meshes.
1.If the master of a fishing vessel disputes the result of the determination of the mesh size carried out in accordance with Article 13, 20 meshes shall be selected and measured in another part of the fishing net in accordance with Articles 6 to 12.
2.The mesh size shall then be redetermined as the mean value, displayed by the gauge, of all 40 meshes measured. The displayed result of the gauge shall be final.
1.The inspector shall select meshes from any part of the fishing net which is subject to a maximum permitted twine thickness.
2.Twines within a mesh that are broken or have been repaired shall not be selected.
Twines in diamond mesh netting shall be selected in the following way, as shown in Annex VIII:
in the case of single twine netting, the twine on opposite sides of 10 meshes shall be selected;
in the case of double twine netting, each strand of twine on opposite sides of five meshes shall be selected.
Twines in square mesh netting shall be selected in the following way, as shown in Annex VIII:
in the case of single twine netting, the twine on only one side of 20 meshes shall be selected, with the same side being selected in each mesh;
in the case of double twine netting, each strand of twine on only one side of 10 meshes shall be assessed, with the same side being selected in each mesh.
A gauge with a circular hole with a diameter equal to the maximum twine thickness permitted for the part of the net considered shall be used by the inspector.
Twines shall be assessed when unfrozen.
When the thickness of the twine prevents the closure of the jaws of the gauge or the twine does not pass easily through the hole when the jaws are closed, the assessment of the thickness of a twine shall be noted by the inspector as a negative assessment (–).
1.If more than five negative assessments (–) of the 20 twines selected are noted in accordance with Article 20, the inspector shall again select and assess a further 20 twines in accordance with Articles 15 to 20.
2.If more than 10 negative assessments (–) of the total 40 twines selected are found, the twine thickness shall be determined as exceeding the maximum twine thickness permitted for that part of the fishing net.
1.If the master of the vessel disputes the result of the assessment of the twine thickness carried out in accordance with Article 21, the provisions of paragraph 2 of this Article shall apply.
2.The inspector shall again select and assess 20 different twines in the same part of the fishing net. If more than five negative assessments (–) of the total 20 twines selected are found, the twine thickness shall be determined as exceeding the maximum twine thickness permitted for that part of the fishing net. The result of that assessment shall be final.
1.Regulation (EC) No 129/2003 is repealed.
2.Reference to the provisions of the Regulation (EC) No 129/2003 shall be construed as reference to the present Regulation and read in accordance with the correlation table in Annex IX.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F7Art. 24 omitted (31.12.2020) by virtue of The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(5); 2020 c. 1, Sch. 5 para. 1(1)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F8Art. 25 omitted (31.12.2020) by virtue of The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(5); 2020 c. 1, Sch. 5 para. 1(1)
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 10 June 2008.
For the Commission
Joe Borg
Member of the Commission
Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.
Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:
Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.
Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.
Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.
Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:
liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys