xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
1.[F1Inspectors] shall use the mesh gauge and twine thickness gauges which comply with the provisions of this Regulation for the determination of the mesh size and the twine thickness of fishing nets when conducting fishery inspections.
2.The technical specifications applying to the mesh gauge are set out in Annex III.
3.The technical specifications applying to twine thickness gauges are set out in Annex IV.
4.The mesh gauge and twine thickness gauges referred to in paragraph 1 shall be marked ‘EC gauge’ and certified by the manufacturer as complying with the technical specification referred in paragraphs 2 and 3 respectively.
5.The mesh gauge and twine thickness gauges sold or distributed for use by entities or persons other than [F2the competent authorities of a fisheries administration] shall not be marked ‘EC gauge’.
Textual Amendments
F1Word in Art. 3(1) substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(3)(a); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in Art. 3(5) substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(3)(b); 2020 c. 1, Sch. 5 para. 1(1)
[F3A fisheries administration must ensure that the calibrated test weights] and calibrated test measuring plate provided for in figure 1 of Annex V [F4are] certified by the [F5appropriate certification authority] and marked ‘EC’.
Textual Amendments
F3Words in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(a); 2020 c. 1, Sch. 5 para. 1(1)
F4Word in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(b); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in Art. 4 substituted (31.12.2020) by The Common Fisheries Policy and Aquaculture (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/753), regs. 1, 12(4)(c) (as amended by S.I. 2019/1312, regs. 1(2), 9(3)(a)); 2020 c. 1, Sch. 5 para. 1(1)
The accuracy of the mesh gauge shall be verified by:
inserting the jaws of the gauge into slots of the calibrated test plate as provided for in figure 1 of Annex V;
hanging the calibrated test weights on the fixed jaw, as provided for in figure 2 of Annex V.