PART 2 EC type-approval certificate
MODEL Format: A4 (210 × 297 mm)EC TYPE-APPROVAL CERTIFICATE
Stamp of type-approval authority
Communication concerning:
a Delete where not applicable. | |
of a type of windscreen washer system as a separate technical unit | |
with regard to Regulation (EU) No 1008/2010, as last amended by Regulation (EU) No …/…a | |
EC type-approval number: … | |
Reason for extension: … |
SECTION I
0.1.Make (trade name of manufacturer): …
0.2.Type: …
0.3.Means of identification of type, if marked on the separate technical unit(1): …
0.3.1.Location of that marking: …
0.5.Name and address of manufacturer: …
0.7.Location and method of affixing of the EC approval mark: …
0.8.Name(s) and address(es) of assembly plant(s): …
0.9.Name and address of the manufacturer's representative (if any): …
SECTION II
1.Additional information: see Addendum.
2.Technical service responsible for carrying out the tests: …
3.Date of test report: …
4.Number of test report: …
5.Remarks (if any): see Addendum.
6.Place: …
7.Date: …
8.Signature: …
:
Information package
Test report
Addendum to EC type-approval certificate No …
1.Additional information:
Brief description of the type of separate technical unit: …
Detailed description of the washer system:
Number of nozzles: …
Number of outlet ports per nozzle: …
Description of washer line hoses and its mounting to pump and nozzles: …
Description of washer pump: …
Fluid storage capacity (litre): …
2.Suitable for hand of drive: left/right(2)
3.Any part of the system may be situated in the engine compartment: yes/no(2)
4.Separate technical unit: universal/vehicle specific(2)
5.Remarks: …
6.List of vehicle types for which the separate technical unit has been approved (if applicable): …
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
Delete as appropriate.