Chwilio Deddfwriaeth

Commission Regulation (EU) No 939/2010Dangos y teitl llawn

Commission Regulation (EU) No 939/2010 of 20 October 2010 amending Annex IV to Regulation (EC) No 767/2009 on permitted tolerances for the compositional labelling of feed materials or compound feed as referred to in Article 11(5) (Text with EEA relevance)

 Help about advanced features

Nodweddion Uwch

 Help about UK-EU Regulation

Legislation originating from the EU

When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.

Close

Mae hon yn eitem o ddeddfwriaeth sy’n deillio o’r UE

Mae unrhyw newidiadau sydd wedi cael eu gwneud yn barod gan y tîm yn ymddangos yn y cynnwys a chyfeirir atynt gydag anodiadau.Ar ôl y diwrnod ymadael bydd tair fersiwn o’r ddeddfwriaeth yma i’w gwirio at ddibenion gwahanol. Y fersiwn legislation.gov.uk yw’r fersiwn sy’n weithredol yn y Deyrnas Unedig. Y Fersiwn UE sydd ar EUR-lex ar hyn o bryd yw’r fersiwn sy’n weithredol yn yr UE h.y. efallai y bydd arnoch angen y fersiwn hon os byddwch yn gweithredu busnes yn yr UE. EUR-Lex Y fersiwn yn yr archif ar y we yw’r fersiwn swyddogol o’r ddeddfwriaeth fel yr oedd ar y diwrnod ymadael cyn cael ei chyhoeddi ar legislation.gov.uk ac unrhyw newidiadau ac effeithiau a weithredwyd yn y Deyrnas Unedig wedyn. Mae’r archif ar y we hefyd yn cynnwys cyfraith achos a ffurfiau mewn ieithoedd eraill o EUR-Lex. The EU Exit Web Archive legislation_originated_from_EU_p3

Status:

Point in time view as at 31/12/2020.

Changes to legislation:

There are currently no known outstanding effects for the Commission Regulation (EU) No 939/2010. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Commission Regulation (EU) No 939/2010

of 20 October 2010

amending Annex IV to Regulation (EC) No 767/2009 on permitted tolerances for the compositional labelling of feed materials or compound feed as referred to in Article 11(5)

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EC) No 767/2009 of the European Parliament and of the Council of 13 July 2009 on the placing on the market and use of feed, amending European Parliament and Council Regulation (EC) No 1831/2003 and repealing Council Directive 79/373/EEC, Commission Directive 80/511/EEC, Council Directives 82/471/EEC, 83/228/EEC, 93/74/EEC, 93/113/EC and 96/25/EC and Commission Decision 2004/217/EC(1), and in particular Article 27(1) thereof,

Whereas:

(1) Regulation (EC) No 767/2009 provides for a set of EU rules concerning the marketing conditions of feed materials and compound feed. Annex IV of this Regulation includes permitted tolerances for the compositional labelling of feed materials and compound feed.

(2) Statistical control data from the competent authorities in the Member States on deviations in feed samples have revealed that substantial changes need to be made to the parameters set out in Annex IV to Regulation (EC) No 767/2009 in order to consider the scientific and technological developments in sampling and analytical methods. The Commission has now completed the evaluation of that data and consequently the structure and the parameters of Annex IV should be modified.

(3) The amended tolerances for the moisture content should take into account certain feed materials with a moisture content greater than 50 % as for these feed materials new labelling provisions have been introduced by Articles 15 and 16 of Regulation (EC) No 767/2009.

(4) In the absence of methods to determine the energy value and the protein value at Union level, Member States should be allowed to maintain their national tolerances for these parameters.

(5) For the newly introduced tolerances for feed additives in feed it should be clarified that these only apply to the technical deviations, as the analytical tolerance is already determined in line with the official method of detection for the respective feed additive. The tolerances should apply to declared values in the list of feed additives and the list of analytical constituents.

(6) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on the Food Chain and Animal Health and neither the European Parliament nor the Council has opposed them,

HAS ADOPTED THIS REGULATION:

Article 1U.K.

Annex IV to Regulation (EC) No 767/2009 is replaced in accordance with the Annex to this Regulation.

Article 2U.K.

This Regulation shall enter into force on the 20th day following its publication in the Official Journal of the European Union.

This Regulation shall apply from 1 September 2010.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 20 October 2010.

For the Commission

The President

José Manuel Barroso

ANNEXU.K.

Annex IV to Regulation (EC) No 767/2009 is replaced by the following:

ANNEX IV Permitted tolerances for the compositional labelling of feed materials or compound feed provided for in Article 11(5)

Part A: U.K. Tolerances for the analytical constituents set out in Annexes I, V, VI and VII

1.The tolerances laid down in this Part include technical and analytical deviations. Once analytical tolerances covering measurement uncertainties and procedural variations are fixed at Union level, the values set in point 2 should be adapted accordingly in order to cover only the technical tolerances.U.K.

2.Where the composition of a feed material or compound feed is found to deviate from the labelled value of the analytical constituents set out in Annexes I, V, VI and VII the following tolerances shall apply:U.K.

(a)

for crude oil and fats, crude protein and crude ash:

(i)

± 3 % of the total mass or volume for declared contents of 24 % or more;

(ii)

± 12,5 % of the declared content for declared contents of less than 24 % but not less than 8 %;

(iii)

± 1 % of the total mass or volume for declared contents of less than 8 %;

(b)

for crude fibre, sugar and starch:

(i)

± 3,5 % of the total mass or volume for declared contents of 20 % or more;

(ii)

± 17,5 % of the declared content for declared contents of less than 20 % but not less than 10 %;

(iii)

± 1,7 % of the total mass or volume for declared contents of less than 10 %;

(c)

for calcium, ash insoluble in hydrochloric acid, total phosphorus, sodium, potassium and magnesium:

(i)

± 1 % of the total mass or volume for declared contents of 5 % or more;

(ii)

± 20 % of the declared content for declared contents of less than 5 % but not less than 1 %;

(iii)

± 0,2 % of the total mass or volume for declared contents of less than 1 %;

(d)

for moisture:

(i)

± 8 % of the declared content for declared contents of 12,5 % or more;

(ii)

± 1 % of the total mass or volume for declared contents of less than 12,5 % but not less than 5 %;

(iii)

± 20 % of the declared content for declared contents of less than 5 % but not less than 2 %;

(iv)

± 0,4 % of the total mass or volume for declared contents of less than 2 %;

(e)

as regards the energy value and the protein value, where no tolerance has been laid down in accordance with an EU method or in accordance with an official national method in the Member State in which the feed is placed on the market, the following tolerances shall apply: for the energy value 5 % and for the protein value 10 %.

3.By way of derogation from point 2(a) as regards crude oil and fats and crude protein in pet food, where the declared content is less than 16 % the permitted deviation shall be ± 2 % of the total mass or volume.U.K.

4.By way of derogation from point 2, the permitted deviation from the declared content to the upper side for crude oil and fats, sugar, starch, calcium, sodium, potassium, magnesium, energy value and protein value may be up to twice the tolerance laid down in points 2 and 3.U.K.

5.By way of derogation from point 2, the tolerances for ash insoluble in hydrochloric acid and moisture apply only to the upper side and no limits to the tolerances are set to the lower side.U.K.

Part B: U.K. Tolerances for feed additives labelled according to Annexes I, V, VI and VII

1.The tolerances laid down in this Part include technical deviation only. They shall apply to feed additives in the list of feed additives and in the list of analytical constituents.U.K.

As regards feed additives listed as analytical constituents, the tolerances shall apply to the total amount labelled as the guaranteed quantity at the end of the minimum storage life of the feed.

Where the content of a feed additive in a feed material or compound feed is found to be below the declared content, the following tolerances shall apply(2):

(a)

10 % of the declared content if the declared content is 1 000 units or more;

(b)

100 units if the declared content is less than 1 000 units but not less than 500 units;

(c)

20 % of the declared content if the declared content is less than 500 units but not less than 1 unit;

(d)

0,2 units if the declared content is less than 1 unit but not less than 0,5 units;

(e)

40 % of the declared content if the declared content is less than 0,5 units.

2.Where a minimum and/or a maximum content of an additive in a feed is laid down in the respective authorisation act for that feed additive, the technical tolerances laid down in point 1 shall only apply above a minimum content or below a maximum content, where appropriate.U.K.

3.As long as the fixed maximum content of an additive as referred to in point 2 is not exceeded, the deviation above the declared content may go up to three times the tolerance laid down in point 1. However, if for feed additives belonging to the group of micro-organisms a maximum content is laid down in the respective authorising act for that feed additive, the maximum content shall constitute the upper permitted value.U.K.

(2)

1 unit in this point means 1 mg, 1 000 IU, 1 × 109 CFU or 100 enzyme activity units of the respective feed additive per kg feed, as appropriate.

Yn ôl i’r brig

Options/Help

Print Options

Close

Mae deddfwriaeth ar gael mewn fersiynau gwahanol:

Y Diweddaraf sydd Ar Gael (diwygiedig):Y fersiwn ddiweddaraf sydd ar gael o’r ddeddfwriaeth yn cynnwys newidiadau a wnaed gan ddeddfwriaeth ddilynol ac wedi eu gweithredu gan ein tîm golygyddol. Gellir gweld y newidiadau nad ydym wedi eu gweithredu i’r testun eto yn yr ardal ‘Newidiadau i Ddeddfwriaeth’.

Gwreiddiol (Fel y’i mabwysiadwyd gan yr UE): Mae'r wreiddiol version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Pwynt Penodol mewn Amser: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

Gweler y wybodaeth ychwanegol ochr yn ochr â’r cynnwys

Rhychwant ddaearyddol: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Dangos Llinell Amser Newidiadau: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Dewisiadau Agor

Dewisiadau gwahanol i agor deddfwriaeth er mwyn gweld rhagor o gynnwys ar y sgrin ar yr un pryd

Close

Rhagor o Adnoddau

Gallwch wneud defnydd o ddogfennau atodol hanfodol a gwybodaeth ar gyfer yr eitem ddeddfwriaeth o’r tab hwn. Yn ddibynnol ar yr eitem ddeddfwriaeth sydd i’w gweld, gallai hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted version that was used for the EU Official Journal
  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • pob fformat o’r holl ddogfennau cysylltiedig
  • slipiau cywiro
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill
Close

Llinell Amser Newidiadau

Mae’r llinell amser yma yn dangos y fersiynau gwahanol a gymerwyd o EUR-Lex yn ogystal ag unrhyw fersiynau dilynol a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig.

Cymerir dyddiadau fersiynau’r UE o ddyddiadau’r dogfennau ar EUR-Lex ac efallai na fyddant yn cyfateb â’r adeg pan ddaeth y newidiadau i rym ar gyfer y ddogfen.

Ar gyfer unrhyw fersiynau a grëwyd ar ôl y diwrnod ymadael o ganlyniad i newidiadau a wnaed gan ddeddfwriaeth y Deyrnas Unedig, bydd y dyddiad yn cyd-fynd â’r dyddiad cynharaf y daeth y newid (e.e. ychwanegiad, diddymiad neu gyfnewidiad) a weithredwyd i rym. Am ragor o wybodaeth gweler ein canllaw i ddeddfwriaeth ddiwygiedig ar Ddeall Deddfwriaeth.

Close

Rhagor o Adnoddau

Defnyddiwch y ddewislen hon i agor dogfennau hanfodol sy’n cyd-fynd â’r ddeddfwriaeth a gwybodaeth am yr eitem hon o ddeddfwriaeth. Gan ddibynnu ar yr eitem o ddeddfwriaeth sy’n cael ei gweld gall hyn gynnwys:

  • y PDF print gwreiddiol y fel adopted fersiwn a ddefnyddiwyd am y copi print
  • slipiau cywiro

liciwch ‘Gweld Mwy’ neu ddewis ‘Rhagor o Adnoddau’ am wybodaeth ychwanegol gan gynnwys

  • rhestr o newidiadau a wnaed gan a/neu yn effeithio ar yr eitem hon o ddeddfwriaeth
  • manylion rhoi grym a newid cyffredinol
  • pob fformat o’r holl ddogfennau cysylltiedig
  • dolenni i ddeddfwriaeth gysylltiedig ac adnoddau gwybodaeth eraill