Commission Regulation (EU) No 601/2012 (repealed)Dangos y teitl llawn

Article 52 Monitoring methodology for emissions from aviation activities

1. Each aircraft operator shall determine the annual CO₂ emissions from aviation activities by multiplying the annual consumption of each fuel expressed in tonnes by the respective emission factor.

2. Each aircraft operator shall determine the fuel consumption for each flight and for each fuel, including fuel consumed by the auxiliary power unit. For that purpose, the aircraft operator shall use one of the methods laid down in section 1 of Annex III. The aircraft operator shall choose the method which provides for the most complete and timely data combined with the lowest uncertainty without incurring unreasonable costs.

3. Each aircraft operator shall determine the fuel uplift referred to in section 1 of Annex III based on one of the following:

(a) the measurement by the fuel supplier, as documented in the fuel delivery notes or invoices for each flight;

(b) data from aircraft onboard measurement systems recorded in the mass and balance documentation, in the aircraft technical log or transmitted electronically from the aircraft to the aircraft operator.

4. The aircraft operator shall determine fuel contained in the tank using data from aircraft onboard measurement systems and recorded in the mass and balance documentation, in the aircraft technical log or transmit it electronically from the aircraft to the aircraft operator.

5. Aircraft operators shall apply tier 2 as set out in section 2 of Annex III.

However, aircraft operators having reported average annual emissions over the trading period immediately preceding the current trading period, which were equal to or less than 50 000 tonnes of fossil CO₂ may apply as a minimum tier 1 as defined in section 2 of Annex III. All aircraft operators may apply as a minimum tier 1 as defined in section 2 of Annex III for source streams jointly corresponding to less than 5 000 tonnes of fossil CO₂ per year or less than 10 %, up to a maximum contribution of 100 000 tonnes of fossil CO₂ per year, whichever is highest in terms of absolute value. Where, for the purposes of this subparagraph reported emissions are not available or no longer applicable, the aircraft operator may use a conservative estimate or projection to determine the average annual emissions.

6. Where the amount of fuel uplift or the amount of fuel remaining in the tanks is determined in units of volume, expressed in litres, the aircraft operator shall convert that amount from volume to mass by using actual density values. The aircraft operator shall determine the actual density by using one of the following:

(a) on-board measurement systems;

(b) the density measured by the fuel supplier at fuel uplift and recorded on the fuel invoice or delivery note.

The actual density shall be expressed in kg/litre and determined for the applicable temperature for a specific measurement.

In cases for which actual density values are not available, a standard density factor of 0,8 kg/litre shall be applied upon approval by the competent authority.

7. For the purposes of the calculation referred to in paragraph 1, the aircraft operator shall use the default emission factors set out in Table 2 in Annex III.

For reporting purposes, that approach shall be considered as tier 1. For fuels not listed in that table, the aircraft operator shall determine the emission factor in accordance with Article 32, considered as tier 2. For such fuels, the net calorific value shall be determined and reported as a memo-item.

8. By way of derogation from paragraph 7, the aircraft operator may, upon approval by the competent authority, derive the emission factor or the carbon content, on which it is based, or the net calorific value for commercially traded fuels from the purchasing records for the respective fuel provided by the fuel supplier, provided that those have been derived based on internationally accepted standards and the emission factors listed in Table 2 in Annex III cannot be applied.