Commission Regulation (EU) No 748/2012Dangos y teitl llawn

21.A.21 Issue of a type-certificate U.K.

The applicant shall be entitled to have a product type-certificate issued by the Agency after:

(a)

demonstrating its capability in accordance with point 21.A.14;

(b)

submitting the declaration referred to in point 21.A.20(d); and

(c)

it is shown that:

1.

[F1 the product to be certificated meets the applicable type-certification basis and environmental protection requirements designated in accordance with point 21.A.17A and 21.A.18;]

2.

any airworthiness provisions not complied with are compensated for by factors that provide an equivalent level of safety;

3.

no feature or characteristic makes it unsafe for the uses for which certification is requested; and

4.

the type-certificate applicant has expressly stated that it is prepared to comply with point 21.A.44.

(d)

In the case of an aircraft type-certificate, the engine or propeller, or both, if installed in the aircraft, have a type-certificate issued or determined in accordance with this Regulation[F1 ;]

(e)

[F2 In the case of an aircraft type-certificate, it is demonstrated that the operational suitability data meets the applicable operational suitability data certification basis designated in accordance with 21.A.17B;

(f)

By derogation from point (e), and at the request of the applicant included in the declaration referred to in point 21.A.20(d), an aircraft type-certificate may be issued before compliance with the applicable operational suitability data certification basis has been demonstrated, subject to the applicant demonstrating compliance with the operational suitability data certification basis before the operational suitability data must actually be used.]

Textual Amendments

F1 Substituted by Commission Regulation (EU) No 69/2014 of 27 January 2014 amending Regulation (EU) No 748/2012 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (Text with EEA relevance).

F2 Inserted by Commission Regulation (EU) No 69/2014 of 27 January 2014 amending Regulation (EU) No 748/2012 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (Text with EEA relevance).